logo
logo
Sign in

Oxygen Pressure Chamber | Tech Trivial

avatar
Techtrivial
Oxygen Pressure Chamber | Tech Trivial

Air pressure chamber IEC-60811 is used to test the resistance of the rubber parts against aging under Oxygen Pressure and Heat. Buy an oxygen pressure chamber with us.


The air pressure chamber test is used for heat aging of samples under oxygen air pressure. It is applicable for insulation and sheath of electrical cables. It is also used to aging for vulcanized rubber for change in tensile strength & elongation of the material.

 

Every Tech Trivial Air pressure chamber gives you exactly what you need: accurate measurements, consistent, reliable performance, best possible safety, and best possible warranty available.The Air Bomb Apparatus is designed to test rubber parts against resistance to ageing.


The Air Bomb Apparatus consists Pressure Chamber designed to retain an internal atmosphere of Oxygen under pressure with provision for placing rubber test pieces. The chamber is fitted with a specialized heating arrangement. The working chamber is made up of Stainless Steel 6mm think sheet provided with a lid and special gasket to prevent leakages. The Chamber is provided with a digital PID controller (Fuji, made in JAPAN)

Pressure Gauge/Pressure regulator to read and control the pressure digitally, inlet/outlet valves for admitting and releasing oxygen and a safety valve (made in USA)


  • Model No. : D1017
  • Standard compliance: It is in line with IS: 10810, IS: 10810, Appendix A of IS 6380 – 1984, and ASTM D 572
  • Features: Doubled walled chamber with inner chamber of 8 to 10 mm wall thickness.
  • Chamber Size: 150mm (Diameter) x 300mm (Height)
  • Temperature Control : Digital PID Controller, +/- 1-2oC
  • Pressure : 0 to 22 kg/cm2, LC 0.1 kg/cm2
  • Pressure Control : Using Digital indicating Controller
  • Heating: Dry heating using Jacket Heater
  • Three-layer safety for over pressure
  • You can also check out our more Machinery Products.
  • Specification
  • Size of the Chamber: 150mm Dia X 300mm Depth
  • Oxygen/Air Pressure: Up to 21kg/cm2
  • Temperature: Ambient to 1500 C
  • Temperature Accuracy: +/- 2 Deg. C
  • HMI Touch Screen Operation
  •  

The parts of rubber are aged in an atmosphere of oxygen under pressure and an elevated temperature for a specified duration and then allowed to condition at room temperature at the specified time. To know more about electrical tests apparatus please visit our General & Physical Tests category.

collect
0
avatar
Techtrivial
guide
Zupyak is the world’s largest content marketing community, with over 400 000 members and 3 million articles. Explore and get your content discovered.
Read more