Are you looking for an answer on the importance of the Cricut Fine Point Blade and how to load it before the commencement of the cutting process? Developed from German carbide steel, it can create the most twisted cuts with the machine. It also delivers long-lasting, accurate cutting, preparing you to impress every viewer.
Visit- cricut.com/setup
The total number of cuts that the blade can do depends upon the type of material loaded inside it. Crafters referred to Fine Point Blade as the German Carbide Premium Blade. The blade is compatible with Maker, Explore series and can be used with its housing.
However, it’s essential to keep replacing the blade on time to avoid getting its sharpness worn out and increase its life span. Furthermore, you are informed to grab all the details described in the following lines of the article.
How to Load Cricut Fine Point Blade in Cricut Maker?
It doesn’t matter which version of the electric cutting machine you use to create DIY projects. However, if you specifically use a Maker machine, loading the blade in it is very effortless. You need to follow the steps explained in the following lines:
Securely Seated Housing
- It’s very relevant to know that your blade housing is positioned on the top surface of Clamp B.
- However, if the clamp is placed too high, your blade won’t be able to contact the loaded material.
Clamp Closure
- You must close the left arm first while closing the clamp arms around the blade housing.
- The left arm will have an indentation that will fit easily around the housing.
- Swing the right arm and close the plastic tab while holding the left arm in place.
- The clamp arms will be secured around the housing and put smooth pressure to close the plastic tab.
- After closing them properly, both the clamps (A & B) will be aligned in their respective places.
Following the easy loading of the blade, you’ll get the appropriate result you were expecting from Cricut. Besides that, it’s very important to keep changing the blade occasionally; for that, you must read the information below.
How to Replace Fine Point Blade in Cricut Maker?
Suppose you observe that the machine is losing the capability to give the wished project. Then, it’s an identification to change your blade before it damages the project or machine. You must be careful while unwrapping the blade; otherwise, ignore any injuries. Follow these steps needed to replace the Fine Point Blade in Cricut.
- First, you are supposed to remove the machine’s blade housing:
● For Explore or Maker: You must open Clamp B and remove the blade housing.
● For Legacy: Remove the blade housing by unscrewing the right arm housing.
- Second, pull out the blade from the bottom by gently pushing the pin available on the top of the housing.
- Third, smoothly uncover the blade’s cover, protecting it from getting damaged.
- Next, take the blade and load it inside the empty housing.
- After that, the housing magnet will hold the new blade in place.
- Now, replace the blade housing inside the machine:
● For Explore or Maker: go back to the blade housing to Clamp B and close it.
● For Legacy: Tighten the screw by placing the blade housing inside the black arm.
- Lastly, the blade replaced will start cutting the loaded materials as instructed.
Besides, there will be times when the installed blade won’t get detected. You shouldn’t need to get panic. For that, we’ve described the process that must be followed to resolve the issue.
How to Fix Cricut Fine Point Blade Detention Errors?
Under any circumstances, if your Maker machine isn’t detecting the installed blade, then the error can be resolved by going through the following footsteps:
- First, you must be sure that the tool installed inside Clamp B matches the one proposed on the Load step selected in the Design Space.
- Second, if you don’t recommend the tool, click Edit Tools and choose a different one.
- Third, Clean off the reflective surface from the housing by removing Clamp B.
- Then, reinstall the tool in Clam B and select the flashing Go button.
- Next, remove the tool from Clamp B. Take a microfiber cloth and softly clean the tool sensor.
- Select the flashing Go button and reinstall the tool inside Clamp B.
- Take a test cut with a basic step by opting for a different adaptive tool like Knife Blade, Rotary Blade & Scoring Wheel.
- Here you go; your issue of failing to detect the install blade will be resolved.
Once the problem of detecting the blade is resolved, Cricut will resume its pending work and decrease the user’s tension.
Conclusion
Most crafters prefer using this blade to do complicated cutting of the material enveloping the thinnest to thickest material while crafting projects. The Fine-Point blade has a dimension of 11.4 x 2.5 x 7.6 CM with a weight of 0.2 pounds. Knowing about its loading process, replacement process, and many more are essential to get the proper result.
FAQs
Question: How can I keep my Fine Point Blade sharp?
Answer: One of the common methods to sharpen the Cricut Blade is to ball up the aluminum foil and remove the blade housing from the machine. Press the blade housing pin to stick the blade further. Then, punch the blade over the foil ball at least 50 times. Once the process completes, you’ll see the cuts much more cleanly.
Question: What is the time duration of Cricut Blades?
Answer: It's obvious that Cricut blades fade after some time. However, the time duration of the blade depends upon the material you upload. It might be assumed that the blade lasts for 03-06 months.
Question: What materials can be cut down by a Fine Point blade?
Answer: Materials such as cardstock, paper, sticker paper, infusible ink transfer sheets, adhesive vinyl, iron-on vinyl, and many more. However, the cutting process will completely depend upon the weight and size of the material.
Source url- https://cricutdesignmachine.wordpress.com/2023/05/06/what-is-cricut-fine-point-blade-how-toload-it/
