logo
logo
Sign in

How Can I Fix A Microwave Turntable That's Not Spinning?

avatar
Bharat sharma
How Can I Fix A Microwave Turntable That's Not Spinning?

We all like the convenience of using the microwave to heat up food. Microwaves are unquestionably helpful, whether used by cooks who occasionally simply want a fast snack or college students who eat nothing but microwaved food. But in case of damage or finding any issue you might call a microwave oven repair service specialist to solve your problem.

 

The central turntable that spins is an integral part of the functional design. This spin is not merely for aesthetic purposes as your meal cooks. It's done to ensure that the dish receives a uniform distribution of microwave heat.

 

Therefore, it might be a serious issue when the plate in your microwave stops spinning. Fortunately, finding the issue isn't too difficult, and you can usually resolve it fast at home. Depending on how your microwave has been used, there are some possible reasons why microwave plates stop spinning. We'll assist you in finding the cause.

 

In order to find your cause, we'll start with the ones that are the simplest to address.

Security First

Remember to unplug the power wire first before prying any plates or removing any screws from your microwave. Never work on an appliance while the power is on.

 

A good rule of thumb is that the appliance cable should be well separated from the wall if you have a screwdriver in your hand. However, if a multimeter test is required, the appliance must be connected, and you must proceed very carefully. Wearing work gloves could help to reduce some shocks.

Blocked Track

The first and simplest cause to address is a blocked track. Under your microwave plate, a track contains a roller guide and coupler that rotate.

 

In order to find your cause, we'll start with the ones that are the simplest to address.

Investigate

Examine the roller and coupler below by removing the microwave plate. Check to see if there are any obvious food crumbs obstructing the spin of each one separately. The most probable issues are crumbs and gooey spills.

Solution

Scrub the interior of your microwave thoroughly, giving close attention to the roller track and the vicinity of the coupler. Clean the area surrounding the coupler to remove any sticky buildup. The coupler has electrical components; do not saturate it.

A Damaged or Filthy Roller Guide

The round or hazily triangular item with tiny wheels that the plate sits on is the roller guide. The plate cannot spin unless the wheels can move freely in the track. Broken wheels have the same ability to halt rotation as track impediments.

 

Your plate could not be spinning if the roller guide's wheels are damaged or are very dusty. Another potential source of imbalanced and rotation-stopping pressures is a broken roller arm.

Investigate

Remove the roller guide below and the microwave plate. Check the roller guide carefully for evidence of dirt or damage. Think about whether it is soiled, sticky, or damaged in any way.

Solution

Use a warm, soapy sponge to clean the roller guide if it is soiled. If it's sticky, give it a brief soak in warm water before wiping it down. You must buy a new roller guide if the old one is damaged. Fortunately, installation is not challenging.

A Broken Tray Coupling

The component with a groove in the centre that rotates with a motor is the tray coupler. This is how the turntable force is transferred to your microwave plate. For the force to be properly transferred, the top of the coupler and the bottom of the plate must be completely aligned.

 

The coupler will cease attempting to spin if the plate resists too much due to an imbalanced force.

 

The coupler may not be properly transmitting force if it is damaged or "stripped".

Investigate

Take the plate from the microwave. Examine the tray coupler in the centre of the microwave's floor closely. Examine the coupler to see whether it appears to be broken, melted, dusty, or if the grooves have worn out over time. Test it out by placing the plate on top and moving it around. What degree of wiggle do you feel?

Solution

The coupler can be cleaned if it's unclean. However, installing a new coupler that will fit snugly with your microwave plate will be required to fix all other issues.

The Turntable Motor Is Broken

The turntable motor is the only remaining choice if your microwave is clean, the guide is in good condition, and the coupler is firmly in place.

 

The component that generates the spinning force is the one that is situated beneath the coupler. Since motors are electrical moving things, they do eventually deteriorate.

 

Microwave motor replacement is a relatively frequent repair. Normal motor failure manifests as fading and sputtering out. However, if something burns out your microwave motor, it may stop working right away.

Investigate

Your microwave's spin will slow down, become erratic, and eventually fade if the motor burns out. Or you can see a spin-resistance incident that really hurt the motor. You may measure the current flowing through the turntable motor if you are comfortable using multimeters and gadgets.

Solution

Turntable motor replacement is required. There is a strong likelihood that your turntable motor is the issue if you don't have a multimeter and the other three possibilities weren't the issue. Search for a microwave repair service near me to solve this issue. At the centre of the microwave's floor, beneath the coupler, lies the turntable motor.

Call the Expert or Look for Microwave Repair at Home Options

Your microwave's rotating plate has failed or halted for a cause. A simple sponge-down of the interior of the microwave is frequently a successful fix for plate whirling issues. Especially if you remember to wipe the microwave surfaces and the area below the dish.

 

If cleaning doesn't work, a coupler or roller guide may need to be replaced. These components are simple and straightforward. If everything else fails, you'll need to determine whether to attempt for microwave repair at home expert. Contact them right now for further information and recommendations on appliance repair! 

collect
0
avatar
Bharat sharma
guide
Zupyak is the world’s largest content marketing community, with over 400 000 members and 3 million articles. Explore and get your content discovered.
Read more