Surya Engineering is a Leading Manufacturer of Reinforcement Bar Coupler. Surya Engineering Deals in Mechanical splicing system technology for the construction Industry, Our product offers to connecting two TMT bar with this mechanical rebar couplers over tradition lap splicing method for bar which is ranging from 12mm to 40mm. Reinforcement couplers are used for extending rebars with full tension resistance. The ends of bars to be joined are provided with threads on Coupler. We have dealers across Mumbai, Pune, Kolhapur, Solapur Delhi, Bangalore, Hyderabad, Kolkata, Raipur, Kota, Udaipur, Rourkela, Patna, Indore, Vijayawada, Vizag, Chennai, Kolkata, Surat, Vadodara, Ahmedabad, Rajkot, Mysore, Hubli, Mangalore, Gadag Chittoor, etc. Contact Us -
Phone : +91 9223446390
Email us : [email protected]
Bolted couplers are most commonly used where the distance between the point of installation and the end of the TMT bar is less than 14" (35.56 cm) to connect the Coupler. Based on this, the MBT coupler has been developed which is a combination of mechanical bolting and welding. In this mechanically bolted coupler, after connecting and bolting both TMT Bar. After the complete Coupling process, two TMT Bar become one single Bar and a new connection joint is formed at that junction which becomes as strong as a welded TMT bar.
The bolted coupler is designed to transfer the load between two tension elements in welded or bolted form. The bolting of the couplers can be done by means of a threaded bar assembly. Bolted couplers are used whenever it is required to achieve a maximum lap length between the two tension elements without the use of any connecting element. Bolted Couplers are installed with bolts, nuts and washers which pass through holes bored along the edges of precast concrete slabs, steel plates or beams with an overlap on one edge. Bolts are then tightened down firmly, thus locking them into place.
