That's where iStore Dubai steps in, offering unparalleled repair services to keep your devices running smoothly. With a reputation for excellence, iStore Dubai stands as the go-to destination for all your repair needs. At iStore Dubai, we pride ourselves on being more than just a repair shop. Our commitment to quality, reliability, and affordability sets us apart as the best repairing service shop in Dubai. Visit iStore Dubai today and let us help you make the most of your technology investment.

In this article, we’ll explore how to recover data from hard drives used in an X-RAID array built on a NetGear NAS, how to configure a shared folder in ReadyNAS, and how to enable FTP. In this NetGear device known as ReadyNAS, the disks which are connected to it and used to store data are automatically combined into an X-RAID disk array. With X-RAID, you can configure the system with one hard disk, add a second disk for data protection, and add more disks later for additional storage capacity. This RAID type uses the capacity of one disk for data storage and reserves the capacity of a second disk for data protection, which allows the volume to recreate data if a disk fails. Here is the second disk containing parity data, and two additional hard disks.

How to create a RAID arrayFor starters, let’s find out how to build a RAID array, for example, a RAID 5 system. Hetman RAID Recovery is a comprehensive solution for NAS data recovery to help you restore your files in a number of different scenarios. How to recover data after accidental removalThis program can also recover data after disk formatting or accidental removal of files. How to restore a RAID manually, with RAID ConstructorHetman RAID Recovery is very easy to use. When all the properties are given, click “Add” for the RAID system to appear in the Drive Manager.

However, it is still possible to lose data even from this kind of disk array. Now you are suggested to select a setup type, and you have several options to choose from: select Gateway to have all program features installed. In the field Select controller choose the controller to use. After that, I select the remaining 4 drives, click Add and Accept DG, then click “Next. ”In the next window, click “Add to SPAN,” add the drive groups we have just created, and click “Next” to continue.

How to create a RAIDFor starters, let’s explore how to build a RAID system on this specific Linksys NAS device. In the NAS manager menu, open “Storage” – “RAID”. The time required to create a RAID system may vary depending on the total capacity of the drives and the RAID level that you have selected. To add a new user, go to the tab “Access” – “Users”. Download and run the program; Hetman RAID Recovery will automatically rebuild the damaged RAID system with the available disks.

Would you like to know how to use the LVM technology in Linux? Also, the LVM technology lets you do many things on the fly, like copying certain volumes, or configuring the mirroring feature the way it works in RAID 1 systems. If you are going to use LVM options for the first time, you have to install it. This can be checked easily, by typing the command lvm in the terminal window. How to display detailed information about LVMTo display detailed information on the composition of an LVM group, run the command pvdisplay.

Open Control Panel – Shared Folders. However, Hetman RAID Recovery supports both of them, and in most cases it can rebuild such RAID arrays automatically. Our utility features an advanced mechanism of automatic scanning designed to identify and recover NAS data in various scenarios of data loss. Select all the items you want to recover, click Recovery, select where you want to save them. When you specify all the properties you know, click Add and the manually rebuilt array will appear in the Drive Manager.

We will also explore how to create an iSCSI partition, configure network access settings, and how to recover data from a RAID system based on this NAS. Many Thecus systems use RAID, RAID 0 and RAID 1 technologies for two-disk storage systems, and RAID 5 technology for large systems consisting of three or more hard disks. As data stored in a NAS system is usually arranged in a RAID configuration, recovering data, files and folders from a broken-down device can become quite challenging. How to create a RAIDFor starters, let’s explore how to create a RAID system on a Thecus network storage device. Hetman RAID Recovery will identify the disks automatically, read their service information and rebuild the damaged RAID system.

In today’s article, we will explore how to replace a dead (inoperable) RAID controller without losing data when it breaks down. Unfortunately, the varying methods used to store RAID configuration data make it impossible to transfer data between storage systems of different manufacturers without data loss. The RAID configuration data is stored on the drives that make up the array. How to replace a RAID controller without losing anythingThe first thing to remember is this: if you make changes to metadata or replace the adapter (or expansion) card, there is always a risk of data loss. To secure yourself against losing data from the RAID system, perform a full backup and check it before you start the migration process.

In this tutorial, you will learn how to switch from RAID 0 or 1 to RAID 5. If you have a spare drive, you can upgrade the existing RAID 1 array to RAID 5. This way, you will enjoy better reliability than RAID 0 could offer, and feel an impressive read/write speed boost in comparison with RAID 1. How to convert RAID 0 (striping) into RAID 5 (parity)However, you can’t use this method to change from RAID 0 to RAID 5 without formatting and losing all the data. Migration from RAID 0 to RAID 5 is only possible when there are two drives - then RAID 0 coincides with RAID 5 in terms of structure.

For starters, let’s explore how to build a RAID system. Enter the NAS management interface and look to the left to find the section “RAID&File System” and open “RAID Management”. To delete an existing RAID volume, click on the “Delete” tab, click the option button beside the RAID volume you want to delete, click OK, and type “Yes” into the field provided in the confirmation box, then click OK to continue. Hetman RAID Recovery will identify the disks automatically, read their service information and rebuild the damaged RAID system. Due to certain peculiarities of building a RAID system on this NAS type, the program shows the volume in a dedicated line “RAID Volumes”.

In this article, you will find a detailed tutorial on data recovery from RAID 0, 1 or 5. At the moment, there is no version of Hetman RAID Recovery for Linux, but running the utility on this specific operating system is still possible. How to recover data from a RAID 1 systemFirst of all, let’s explore the recovery procedure for a RAID 1 device built on Linux and consisting of two hard disks of the same model. Choose where to save them, then click ”Next” and hit ”Recovery” again. Choose where to save them, then click Recovery again.

In today’s article, I’ll tell you how to recover data from a hardware RAID created with the help of a controller integrated into the computer’s motherboard . This software product supports all RAID types and can recover data from inoperable arrays or drives that make it up. Instead, our utility will be able to rebuild the RAID system automatically, scan the drives and recover the files you need. Accidental removal of a RAID system in the Intel Rapid Storage Technology menu. Delete VolumeHetman RAID Recovery will help you recover data even if your RAID system is completely removed in the Intel RST menu.

In this guide, we’ll explore the methods applied to create a software LVM RAID in Linux. Allocating information with blocks of logical volume data on physical disks is determined by a specific RAID type. Now let’s see how to create a RAID 5 system with 5 hard disks combined into a single group of logical volumes. How to Format Disks and Create a Virtual Group for LV RAIDUse the command lvcreate to create an LV RAID. The device will be marked with the value sdb1 and have the system type Linux LVM.

What if your software RAID 5 is down (and it was built in Windows Storage Spaces on Windows Server 2019)? To have your data back, you have to use specialized data recovery software that supports this specific RAID type. Hetman RAID Recovery supports almost all known sorts of RAID systems, and it will help you recover any lost files without effort. This is when Hetman RAID Recovery comes to the rescue. After the scan is over, select the files you want to restore and click ”Recovery”.

This RAID will consist of three hard disks combined into an array with the help of Areca ARC-1210 controller. When starting the operating system with the installed RAID controller and the hard disks, this message will appear on the screen. For quick configuration of your RAID system, select the first menu item – Quick Volume/RAID Setup – and press Enter. How to create a RAID with the manufacturer’s utilityThe other way to create a RAID system is by using a web browser or the manufacturer’s utility ArcHTTP. If your attempt at replacing the damaged controller wasn’t successful, then use a specialized RAID data recovery tool – Hetman RAID Recovery.