logo
logo
Sign in
James Boond 2020-09-10
img

If your Wi-Fi is working but the wired ethernet connection is not, then you should disable the WiFi.

When Windows 10 can access both the Wi-Fi and the ethernet connection, then it prioritizes the latter.

So, if you turn off the wi-fi, you can find out if the ethernet connection is working or not.

To fix ethernet connection issues, follow the solutions mentioned below.Update the Drivers ManuallyYou should pursue these steps provided below:Navigate to the Windows icon, and right-click on it, then choose the Device Manager option.After that, select the list of Network adapters and expand it, then check if any problems are using the devices.Then reach the Ethernet card and identify it.Later right-click on it, and choose the Properties option.Once you reach the screen of Device status, it may say that the device is operating correctly.Now, in case the icon of the Ethernet controller has an exclamation point or a question mark, then install the right driver for it again.Ensure that the Connection is Turned onYou should pursue these steps provided below:Go to the Windows menu, and right-click on it, then choose the Network connections.Now, right-click on it and choose the Enable option.Check the Connection DetailsYou should pursue these steps provided below:Reach the connection of Ethernet and right-click on it, then choose the Properties option.Once you reach the screen of ‘Ethernet Properties’, select the option of ‘Internet Protocol Version 4 (TCP/IPv4)’ then twice click on it.Turn on these options: ‘Obtain DNS server address automatically’ and ‘Obtain an IP address automatically.’Launch the Internet Connection TroubleshooterYou should pursue these steps provided below:Go to  the Search section.Thereafter, type and enter ‘Update and Security’.You have to choose the ‘Troubleshooter’ option.Now, choose and open the ‘Internet connection troubleshooter’ option.Check whether the connection of Ethernet is available.Finally, reboot the system and check once again.Roll Back the Network Adapter DriverYou should pursue these steps provided below:Open the Device Manager.Then select the Network adapters and choose the ‘network adapter’ option.Later, right-click on it then choose the Properties.Once you reach the Properties screen, choose the tab of Driver, and select the ‘Roll Back Driver’ option.Pursue the on-screen instructions to install an earlier version of the driver.In case the option is unavailable, that means there is no driver to roll back to.Disable the FirewallYou should pursue these steps provided below:Launch the Windows Firewall.Disable it.Now, check the Ethernet connection once again.Reset the NetworkYou should pursue these steps provided below:Reach the Settings screen, choose the ‘Network & Internet’ option, and then select the Status option.Then find the option of ‘Network reset.’Now, click on the button of ‘Reset now’ and hit the Yes button.By following the troubleshooting tips mentioned above, you will be able to fix the ethernet connection issues on your Windows 10 device.JEANNE E. WINFIELD arrived on the cyber security scene in the early 2000s when virus and malware were still new and slowly evolving.

Her longtime affair with writing with an interest in the cybersecurity industry, combined with her IT degree, has contributed to experience several aspects of security suite industry such as blogging at mcafee.com/activate.

Source : How to Fix Ethernet Connection Problems in Windows 10

collect
0
sahil 2022-03-15
img
You recently bought a new computer equipped with  Windows 10 and, accustomed as you are to the old versions of the Microsoft operating system, having to deal with the new interface of the latter has almost blown you away! So what else are you waiting to get started? IndexOpen USB stick via autoplayOpen USB stick via File ExplorerOpen USB stick via Disk ManagementIn case of problemsOpen USB stick via autoplayThe first method to open a USB key on Windows 10, as well as the simplest, is to use the automatic playback feature of the Microsoft operating system: in doing so, Windows will propose a series of choices to manage the drive just inserted into the system; choices that can be selected with a click. READ MORE:- https://techjustify. com/how-to-open-a-usb-stick-on-windows-10/
collect
0
faina hassan 2020-09-24

Well, if your answer is yes, then this guide is for you because today, we are going to teach you exactly how you can do this and use your voice to control your Windows 10 computer.

So, let’s get started.Here’s how you can set up voice control for your Windows 10 computer.Sources: https://a1activate.co.uk/blog/post/130054/how-to-set-up-voice-control-on-windows-10Buy a Right MicrophoneIf you want to control your Windows 10 computer, you will require a good microphone to give your commands to it.

Yes, of course, you can use your laptops or webcams microphone, but these microphones are for normal use and may not be a good option if you will use them to control your computer system.

Note: You may see a warning popup on your screen.

Now follow all the on-screen instructions to set up your mic.8.

Next, you will be asked to calibrate your mic by reading a sentence.9.

collect
0
Ella johnson 2021-05-29
img

Windows 10 operating system makes it easier for every user to accomplish any computing task.

Any Windows 10 user can easily customize the settings on their computer system as per their preferences.

Here, we are going to provide you with multiple techniques that you can follow to create multiple folders at the same time on your Windows 10 computer.

You can use a keyboard shortcut “Ctrl + Shift + N” for creating a set of folders.

Here, we have mentioned two different techniques, and each one includes some simple steps that you will have to follow.

After clicking the Start button, type “cmd” in the search bar and then press the enter key.

collect
0
Edward Lewis 2020-01-14
img

System restore is very useful to the users who have no time to restore manually.

Restore point able to help you to do your work without any condition, and save your lots of time, you waste in troubleshooting.

If Windows creates Systems Restored Points Frequently, then you have to make your Windows PC arrange for the scheduled time.How to Perform System Restore Points automaticallyWe know that Windows owned inbuilt features and settings, where users quickly set their Windows PC to restore Points, every day, or weekly in one click, however, there is also a manually setting available.

If you make another attempt, then it will be skipped automatically.

Here are the steps to do.Launched Open Registry Editor and cruise the listed keys.Double click on SystemRestorePointCreationFrequency to edit DWORD.Change the entire value 0.Always remember that Windows cant skip Creating restore point.By System Restore point methodCheckpoint-Computer -Description “TWC – Restore Point” -RestorePointtype MODIFY_SETTING (Command will be used to treat Restore point).Here are some examples of the command helps you to create a restore point.How to APPLICATION INSTALLHow To APPLICATION UNINSTALLHow To DEVICE DRIVER INSTALLHow To CANCELED OPERATIONYou can similarly create a restore point using WMIC.EXE.

here we explained how to Generate the Restore point automatically./Namespace:\\root\default Path SystemRestore Call CreateRestorePoint “Startup Restore Point”, 100, 7Create a Task in Task SchedulerIn the above task mentioned scheduler with power shell where you have to create and schedule tasks.To promote type taskschd.

collect
0
Edward Lewis 2019-12-19
img

When users try to update Windows 10, and they receive 0x800f0988 error, then the given instructions may solve the issue.

Users can also get the error 0x80073701 in the place of 0x800f0988.

If you are facing the same trouble while updating, then this post might be helpful for you.

Go through the blog and follow the steps to fix the updates failed error 0x800f0988 on Windows 10.How to Fix the Error 0x800f0988If  you want to fix the Error 0x800f0988, then you can do these things:Run Update Troubleshooter of WindowsRun StartComponentCleanup Task via DISM otherwise Task SchedulerRun Update Troubleshooter of WindowsIf you want to Update Troubleshooter of Windows, then abide by the given steps:Launch Windows 10 Settings via pressing Win + I.Tap on the Update and Security option, then go to Troubleshoot.Find the Windows Update, then press it, and select the tab of Run troubleshooter.This will check the awaited restart, format the diagnosis then start the service like BITS again.Check the updates as users should not face 0x80073701 or 0x800f0988 code, any such errors.Run StartComponentCleanup Task via DISM otherwise Task SchedulerBefore running it, users should know about  StartComponentCleanup.

This is a tool that was launched into Windows 10 to clear its component when users are not using it.How to Run the Startcomponentcleanup via Task ManagerIn case you intend to run the StartComponentCleanup via Task manager, then go through the below-mentioned steps:Launch Run prompt, input taskschd.msc.Press Enter to open the Task Scheduler.Go to Library\Microsoft\Windows\ServicingChoose the StartComponentCleanup option, right-click then click run option.Wait for the procedure to finish, and then check for any updates.How to Run the Startcomponentcleanup via DISMIf you want to run the StartComponentCleanup via DISM, then you can follow the provided steps:Launch the Command Prompt with admin rights.Input or copy is given a command in Command box:dism /online /cleanup-image /start-component cleanupPress Enter, then wait for the command to finish.Start the PC then check for any updates.Among this, users can also use other switches or ResetBase to delete the superseded versions of each element in the store.Then input the given command:Dism.exe /online /Cleanup-Image /StartComponentCleanup /ResetBaseGenerally, the reason for the occurring error is old components, so the use of Start Component Cleanup may fix the problem.Edward Lewis is a creative person who has been writing blogs and articles about cyber security.

He writes about the latest updates regarding trendmicro.com/activation and how it can improve the work experience of users.

collect
0
James Boond 2020-09-10
img

In this article, we will discuss the reasons behind the “Windows was unable to complete the format” error, along with the various practical ways to fix it.

If you have a Windows 10 PC and are unable to format a USB drive because of this error, then read on and follow the fixes mentioned below.Launch a Check Disk ScanYou should follow the steps provided below:Hold the Windows and E buttons simultaneously to launch the File Explorer.Thereafter, connect the flash drive to start scanning the USB port.You should select the ‘This PC’ icon over the desktop.Then select the flash drive and right-click on it to launch its menu.Go to the Properties option.You have to choose the option of Tools and click on OK.You will see a screen which says, ‘You don’t need to scan this drive.’You should start a manual scan by choosing the option of ‘Scan and repair drive.’Format the USB Drive with Disk ManagementYou need to follow provided below:Open the Run prompt.After that, insert ‘diskmgmt.msc’ into it, and press the OK button.Go to the USB stick and right-click on it over the screen of Disk Management, then choose the Format button.You should click on the button of Yes.Later, you should choose a file system to format the flash storage.Hit the button of OK to start the format process.Navigate to the ‘New Simple Volume’ option.Now, format the USB drive using the ‘New Simple Volume Wizard.’Format the Drive with Diskpart Follow the steps given below.Access the Win + X menu.Then choose Command Prompt.In Command Prompt, insert ‘diskpart’ and hit the Return button.You should input ‘list disk’ into it and hit the Return key to launch a drives list.In the Diskpart screen, type ‘select disk n’ into it and hit the Enter button.However, change ‘n’ with the concrete disk number of the USB stick.You should input the ‘clean’ command in it and hit the Return button.Later, insert the ‘create partition primary’ command into the Diskpart.Now, type ‘format fs=ntfs quick’ then hit the Enter key to format the USB drive via NTFS.These were some of the potential solutions for the Windows was unable to complete the formatting error.Robert Hunt is a creative person who has been writing blogs and articles about cybersecurity.

He writes about the latest updates regarding mcafee.com/activate and how it can improve the work experience of users.

His articles have been published in many popular e-magazines, blogs and websites.

Source : Windows 10 PC Won’t Complete the Formatting?

collect
0
sahil 2022-03-09
img
Do you have to reinstall your copy of Windows 10 but you can’t find the certificate with the Product Key and therefore you don’t know how to recover it? The Windows Product Key consists of an alphanumeric sequence of 25 characters, arranged as follows: XXXXX-XXXXX-XXXXX-XXXXX-XXXXX, and is used to verify the authenticity of your operating system. IndexHow to recover Windows 10 product keyHow to recover Windows Product Key associated with a digital licenseWhat if I lost the Product Key instead? How to recover Windows 10 product keyNow let’s see how to recover the product key of your Windows 10 operating system. Now, the blue screen, next to C: \ WINDOWS \ system32 folder, type: (Get-WmiObject -query ‘select * from SoftwareLicensingService’).
collect
0
Ella johnson 2021-08-02

Windows 10 offers many features, and a map network drive is one of them.

It is used with consistency, ease of access, and network setup efficiency.

But recently, numerous users have complained that once updated from v1909 to v2004, Windows 10 unable to map network drive.

If you are getting into exact trouble, then you can pursue this article.Update the 20H2 VersionTo update the 20H2 version, follow these on-screen directions given below:First and foremost, launch the Settings app by pressing Win and I button all over the keyboard.After that, reach the ‘Update & Security’ option and select it.You should reach the left-hand side of the screen and choose the Windows Update option.Then hit the ‘Update & Security’ option.Look beneath the ‘Update & Security’ section and pick the ‘Download and Install’ option.Finally, hit the ‘Restart Now’ button to apply the changes.Add the ProviderFlags Registry ValueTo add the Provider Flags registry value, follow these on-screen directions given below:First of all, invoke the Run accessory by holding the Win and R buttons altogether over the keyboard.After that, type ‘regedit’ into it and hit the Enter button to launch the Registry Editor.You should find the pursuing path: HKEY_CURRENT_USER\Network\Then make a fresh DWORD (32-bit) value named ProviderFlags.Thereafter, twice click on your created value, and inside the box of Value data, input 1.You should redo this process for every mapped network drive over the system.Later, hit the OK button and shut the Registry Editor screen.Now, reboot the system.Utilize the Local Group Policy EditorTo utilize the Local Group Policy Editor, follow these on-screen directions given below:Open the Run accessory by pressing the Win and R keys at once on the keyboard.Once invoked, input ‘gpedit.msc’ into it and hit the Enter key.After getting the ‘Local Group Policy Editor’ screen, choose the ‘Local Computer Policy’ option.You should extend the ‘Computer Configuration’ option and select the ‘Administrative Templates’ option.Navigate to the right-hand side and twice click on the System option.You have to move down to Logon and twice click on it.Then choose the ‘Exclude credential providers’ option and reach the left-hand side, pick the ‘policy settings’ option.Later, select the Enabled circle icon and then hit the Apply button.Now, hit the OK button and reboot the system.Utilize a Batch FileTo utilize a batch file, follow these on-screen directions given below:Go to the Notepad and launch it on your device.After that, copy and paste the pursuing lines in the launched Notepad screen:Ø timeout /t 30Ø net use z: “\\network name\shared folder” /persistent:noLater store the file as mapdrive.bat.Thereafter, open the Run accessory by pressing the Win and R keys at once on the keyboard.Now, insert ‘shell:startup’ into it and hit the Enter key.After launching the Startup folder, input the batch file mapdrive.bat or its shortcut into it.Utilize Credential ManagerTo utilize credential manager, follow these on-screen directions given below:Launch the Control Panel on the system.After that, select the User Accounts option.Then click on the ‘Manage your credentials’ option.You should hit the ‘Windows Credentials’ option.Thereafter, extend the ‘Windows Credentials’ option beside the network computer name.Later, hit the Remove button in sort to remove the sorted details from the specific system or share.Hit the Yes button once you are requested whether you are sure you would like to remove these Windows details permanently.Now, shut the Credential screen and launch the This PC icon.Then, right-click on your mapped drive and choose the Disconnect option.10.Finally, reboot the system and map the network drive once again.Ella johnson has extensive expertise in Microsoft Office and has spent a good part of her life working in the technical industry.

Ella has written several technical blogs, manuals, and reviews for several renowned websites.visit here: Windows 10 Can’t Map Network Drive: Here Are The Fixes 

collect
0
Ella johnson 2021-08-04
img

When a Windows 10 user tries to remove the Windows 10 profile, he might get a ‘Profile not deleted completely’ error.

This specific error is complained about on all Windows 10 editions.

If you are also struggling with this error, you can follow these resolutions provided below.Turn off Windows SearchTo turn off Windows search, pursue these on-screen instructions mentioned below:To launch the Run accessory, use the Win and R keys combination over the keyboard.After that, insert ‘services.msc’ in the Run box and select the OK button.Once you get a UAC (User Account Control) pop-up, hit the Yes button.After going to the Services window, move on to the right side and go down via the available services list until you find the Windows Search see If service.Once you manage to find the right service listing, right-click on it, then select the ‘Stop’ button via the context menu.After stopping the service successfully, launch the Run accessory by pursuing the above steps.Then insert ‘SystemPropertiesAdvanced’ and hit the Enter button to invoke the System Properties window.You should enter the Advanced tab via the upper menu and select the Settings option related to the User Profiles.After going to the User Profile menu, choose the profile you would like to get rid of and hit the Delete option and verify the method to delete it properly.10.Once you have managed to delete the suspicious Windows profile without facing the exact ‘Profile not deleted completely’ error.

Hold the Win and R buttons simultaneously to launch another Run pop-up.11.Afterward, insert ‘services.msc’ into it and select the OK button to launch the Services window.

Once you see the UAC (User Account Control) prompt, press the Yes button.12.Once you returned successfully to the Services window, find the Windows Search service again via the right-side section, enable it again by right-clicking on it, and then select the Start button.Remove the Leftover Registry KeysTo remove the leftover registry keys, pursue these on-screen instructions mentioned below:To open the File Explorer, use the Win and E buttons simultaneously on the keyboard.Then go to the C:\Users folder and click on it.Then, find the folder named once the folder you would like to get rid of.Once you get it, right-click on the right folder and hit the Delete button via the context menu.Open the Run prompt by using Win and R keys altogether on your keyboard.Then insert ‘regedit’ into it and hit the OK button to bring up the Registry Editor screen.You will get a UAC (User Account Control) pop-up and then click on the Yes button.After that, utilize the left pane menu to enter the following location: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileListBeneath the ProfileList section, you will see the keys series-parallel to a Windows Profile.

The job is to enter each entry and look at the ‘ProfileImagePath’ data related to it.10.After managing to detect the right ProfileList key that includes remnants of profile data, right-click on it, then pick the Delete button.11.Now, reboot the system.Remove the Unknown AccountTo remove the unknown account, pursue these on-screen instructions mentioned below:Invoke the Run accessory by using Win and R buttons simultaneously on your keyboard.Once it opens, insert ‘sysdm.cpl’ in it and hit the OK button.After launching the ‘System Properties’ window, select the ‘Advanced’ tab, then choose the Settings option related to the User Profiles.After getting UAC (User Account Control) pop-up, press the Yes button.Go to the User Profiles menu, choose the ‘Account Unknown‘ profile, and then hit the Delete button.Finally, reboot the system and check the issue.Ella johnson has extensive expertise in Microsoft Office and has spent a good part of her life working in the technical industry.

collect
0
Delhi Magazines 2020-08-28
img

Nowadays, most of the Windows 10 users are complaining that they can’t locate the button or any option to adjust the level of brightness in the Notification Center or the taskbar.

Users have to search for brightness settings in the Settings application, and it is a very lengthy process.

In order to get the brightness slider on the desktop, follow the instructions given below.Make Changes in the Device ManagerYou should follow the steps provided below:Hit the Windows and R buttons to launch the Run box.After that, insert ‘devmgmt.msc’ and hit the Enter button to launch the Device Manager.You should select the arrow icon beside the Device Manager and select the only device you locate there and right-click on it.Then select the option of Enable device, if applicable.Thereafter, click on the option of Properties and reach the Driver section.

Confirm if the Device Provider is anyone but Microsoft.

If yes, then click on UninstallGo to the Device Manager, then select the Action option and choose the option of ‘Scan for hardware changes,’ and this will look for devices without any driver, then install them again automatically.Now, verify any pop-ups or dialogs that may appear on the screen.Update the Graphic Card DriverYou should follow the steps provided below:Press the Windows and R keys to open the Run box.Thereafter, insert ‘devmgmt.msc’ and hit the Enter key to open the Device Manager.Extend the section of Display adapters and select the graphics card, then right-click on it.Go to the Uninstall Device option.You should verify any dialogs or pop-ups that may appear on the screen.Check the graphics card driver.

Insert the needed detail about the card and OS then select the Submit or Search option.Then you will see each driver on the list, and don’t forget to move down until you see the needed entry, select the name and click on the Download button.Once you see the screen of ‘Installation Options,’ select the option of ‘Custom (Advanced)’ before clicking on Next.Mark the box of ‘Perform a clean installation’ and then press the Next button to install the driver.Check if the problem has been resolved or not.By following the instructions mentioned above, you will be able to get back the missing brightness slider on your Windows 10 device.

collect
0
alexa thomson 2020-04-06

If you are troubling with the annoying issue of TTM_WATCHDOG_TIMEOUT error, then this article will help you out.

The error will cause your system to freeze and constantly reboot automatically.

So here are the steps to quickly repair the error.Prevent Rebooting AutomaticallyIn case you intend to prevent rebooting automatically, then you can opt to follow the below-mentioned guidelines.Hold the Win + D keys at the same time on your system to reach the desktop and shut the all active process.Go to the This PC and right-click on it.

Then choose the Properties option.After launching the System screen through the Control Panel, click on the Advanced system settings.You will see a prompt wizard with System Properties, and you require to move in the Advanced section.Go to the System failure tab and untick the box of ‘Automatically restart.’Now, click on the OK button, shut the wizard.Source By : https://quick-enbooks-info.com/blog/how-to-fix-ttm_watchdog_timeout-in-windows-10/Launch Blue Screen Troubleshooter If the users are trying to launch a blue screen troubleshooter, then they should carefully apply the given steps.You should click on the Start menu on your system.After that, reach the Settings application and click on it.Select the Update and Security tab to launch the additional settings screen.Go to the new screen and select the Troubleshoot option from the left-hand side panel.You have to continue to the Blue Screen and select it.Then click on ‘Run the Troubleshooter’ and allow the repairing to start.Now, the troubleshooting procedure will end itself.Boot the System in Safe Mode and Load Basic Procedures OnlyIn case you intend to boot the system in safe mode and load basic procedures only, then you can opt to follow the below-mentioned guidelines.Go to the Start menu and right-click on it.After that, click on the Run to launch on your screen.Then input ‘msconfig’ into it and hit the Enter key.You will see a wizard of System Configuration, move to the Boot section.Reach the options of Boot and tick the box of Safe boot.Tick the radio option next to Minimal pursued by selecting the OK button.Thereafter, click on the Restart option to continue.Upgrade Device DriversIf the users are trying to upgrade the device drivers, then they should carefully apply the given steps.Hold the Win + S keys at the same time on your system to launch the Taskbar Search.After that, input ‘device manager’ into it and hit the Enter key.Go to the console and find things having an exclamation sign.You should extend the system by selecting and, once extended, check for the yellow color warning mark drivers.Then reach every driver and right-click on it.After finishing the update procedure, reboot the system.Upgraded Windows 10In case you intend to upgrade Windows 10, then you can opt to follow the below-mentioned guidelines.Hold the Win + I keys at the same time on your system to launch the Settings application.After that, reach the Update and Security option and select it.Then click on the Windows Update option from the left-hand side panel.You should select the ‘Check for updates’ button.After this, searching will begin quickly, and once completed, click on the Download option beneath each item individually.Remove the Duplicate AppsIf the users are trying to remove the duplicate apps, then they should carefully apply the given steps.Navigate to the Start logo on your system and right-click on it.After that, click on the Apps and Features option.You should click on the Uninstall option from t extended panel.Then pursue the on-screen steps to complete the procedure.You have to reboot the device, and after log-in again, look whether the issue has gone or not.Return to Earlier Restore Point to Undo Current ModificationsIn case you intend to return to an earlier restore point to undo current modifications, then you can opt to follow the below-mentioned guidelines.Hold the Win + R keys at the same on your system to launch the Run section.After that, input ‘rstrui’ into it and hit the Enter key.Go to the wizard of System Restore showing subsequently, click on the Next option.After generating restore points, tick the box of ‘Show more restore points.’Now, click on the Finish button to begin the restoring procedure.Launch Windows 10 File Checker in Elevated Command PromptIf the users are trying to launch Windows 10 file checker in an elevated command prompt, then they should carefully apply the given steps.Go to the lower left-hand side of the screen and select the search button from the Taskbar.Thereafter, input ‘cmd.exe’ into it and hit the Enter key.After showing the Command Prompt, perform a right-click on it and click on the Run as Administrator.Then UAC will ask you for permission in rolled in prompt.Click on the Yes button to a given consent.Input ‘sfc /scannow’ into it and hit the Enter key.When you see any malware file, this will be repaired instinctively.Uninstall AntivirusIn case you intend to uninstall the antivirus, then you can opt to follow the below-mentioned guidelines.Hold the Win + I keys at the same time on your system to launch the Settings app.Go to the ‘Apps and features’ and click on it.Then you should click on the ‘Anti-malware software.’Navigate to the Uninstall button and click on it from the expanded panel to allow the procedure to start.You have to pursue the existing steps to delete it from the PC properly.Now, reboot the system.Remove Doubtful Files of Windows UpdateIf the users are trying to remove doubtful files of Windows update, then they should carefully apply the given steps.Navigate to the Start logo and select the Settings app on your system.After that, click on the Update and Security option.You should click on the Windows Update from the left-hand side panel.Select the View Update History.Go to the next screen with a past update list, select the entitles option with Uninstall update.Alexa Thomson is an inventive person who has been doing intensive research in particular topics and writing blogs and articles on turbotax support and many other accounting software-related topics.

She is a very knowledgeable person with lots of experience.

collect
0
john smith 2019-12-10
img

“Mixer” is the broadcasting and streaming service provided by “Microsoft Corporations.” With the help of “Mixer,” you can make a video of your gaming skills and then stream or broadcast it as you wish.

However, you can encounter an error stating “Broadcasting isn’t working.” Read through the blog to fix the issue.Uses of Mixer“Mixer” is basically a build-in streaming service developed for gaming purposes.

Playing games not only entertains the players, but it also entertains and makes others excited when they watch fun game plays.Here are the uses and benefits of “Mixer” :The players can make their own professional gaming videos based on their skills and techniques.The player can broadcast his video online and share it with others through its streaming and sharing features.You need not download any other 3rd party software or program for streaming or broadcasting your game.You can watch your broadcasted game that you have streamed earlier.It has various features for streaming and broadcasting.Sometimes, while launching “Mixer” on Windows 10, it flashes an error message regarding broadcasting issues.The error message might be as “Broadcasting isn’t working,” or sometimes it crashes on just launching it in a second.Here is how to troubleshoot the issue of broadcasting in the following ways:1.

Resetting Game BarFollow these steps if you wish to reset the Mixer by resetting the “Game Bar”:First of all, tap on “‘Windows.”After that, go to the start menu and hit the “Settings” icon that appears as a cogwheel.Then, enter “Game Bar” in the provided search bar.After a while, the Game Bar option will open.

Then, you have to hit the “Game Bar” there.Now, select “Advanced.”Next, look for the “Reset” tab by scrolling down the page.Hit the “Reset” tab.2.

Permitting Windows 10 to Run Applications Under BackgroundWhen you play a specific game, some of the applications will become disabled to give you a smoother experience for playing the game.First of all, you have to make sure that the “Game Bar” is not included in the list of deactivated apps running in the background.You have to make sure that the apps running in the background are turned “ON.”First and foremost, tap on “Windows.”After that, hit the “Settings” option there.Now, tap on “Privacy.”Next, navigate to the section tab of Background Applications.Now, check the option “Let applications run in the background” slide bar is switched “On.” If not, turn it on instantly through the slide bar.I’m John Smith.

collect
0
Microprokey.com 2022-04-02
Once you upgrade to Windows 10, all the Microsoft updates and features of the newly updated operating system will be available to you. The license you will receive also enables you to upgrade from Windows 10 Home to Professional, if necessary. Compatible with: Office 2019 â€“ Office 2016 â€“ Office 2013 â€“ Office 2010 is also available Microsoft Office for MAC. Other available Operating Systems: Windows 11 â€“ Windows 8 â€“ Windows 7. (lifetime license)This Microsoft license is a lifetime license.
collect
1
faina hassan 2020-03-05

At times when everything is not working normally, then users may have to explore the Network settings of the operating system of Windows 10.

For instance, if they have the currently updated machine and attempted to launch the Properties of the Network connection, then they may get an error message, “An unexpected error occurred.” If you need to fix the error, then you are on the right post.

Read through the blog to follow the instructions to resolve the issue completely.Source By : https://quick-enbooks-info.com/blog/fix-an-unexpected-error-occurred-in-network-connections-properties-of-windows-10/Unexpected Error Occurred in Network Connections PropertiesInstall again or uninstall the Network adapterStop the IPv6 protocolUpdate Ethernet adapter driverCheck the DNS server addressReinstall or Install the Network AdapterIf you want to reinstall or install the Network adapter, then you can follow the provided steps:Tap on Search.Insert the Device Manager and then select to launch it.Then enlarge the Network adapters section.Right-click on the Network adapter.Choose the Uninstall Device option.Tap on Action tab.Choose the Scan for hardware changes button and tap on it.Windows will then start scanning the system instantly and then check the hardware changes.

It is going to insert a network adapter to list.Launch the Internet properties and then check for the upgrades.Disable the IPv6 ProtocolIf you wish to disable the IPv6 protocol, then pursue the given instructions:Head over to Control Panel.Navigate to Network and Internet.Select the Network and Sharing Center option at the right.Tap on Change adapter settings.Right-click on an Ethernet adapter.Choose the Properties options.Scroll down the Protocol Version 6 below the Network window and untick the box.Hit the OK button to apply the changes.Right-click on an Ethernet adapter.Choose the Properties options.Then check whether the changes have made or not.Update the Ethernet Adapter DriveIf you want to update the Ethernet adapter drive, then abide by the given steps:Launch Device Manager.Tap on Network adapters.Right-click on the Ethernet adapter.Choose the Update Drive button.Press the Locate the updated driver software automatically button in the new tab.Windows will then scan the Internet for the awaiting driver update and then download driver.After installing, start the PC again.Check the DNS Server AddressIn case you need to check the DNS server address, then you need to follow the offered steps:Open Control Panel.Head over to Network and Internet.Select the Network and Sharing Center option at the right.Click on Change adapter settings.Right-click on an Ethernet adapter.Choose the Properties options.Tap twice on Internet Protocol Version 4 option.Click on Use the DNS server addresses button.Insert the given DNS server address on the Preferred and DNS server box.8.8.8.88.8.84.4Hit the OK button to apply the changes.Alexa Thomson is an inventive person who has been doing intensive research in particular topics and writing blogs and articles on quickbooks support and many other accounting software-related topics.

She is a very knowledgeable person with lots of experience. 

collect
0
karen jodes 2020-10-27

When you open folders that have new documents in them, then Windows will take a while for generating the thumbnail previews for the folder.

But when you open up folders that you have previously opened, Windows will be able to display the thumbnail icons very quickly because it stores the pictures it uses on the hard drive.

If you want to make thumbnails load faster on Windows 10, then read on.See Whether the Thumbnail Option is Turned offYou can see if the thumbnail option is turned off by pursuing these guidelines mentioned below:Hit the Windows icon to invoke the Search section on your system.Thereafter, insert ‘control panel’ into it and select the OK button to launch the Control Panel.Once it opens, select the settings of the ‘System and Security’ option and choose the System link.Reach the left side panel and go to the option of ‘Advanced System Settings’, select it, to invoke the System Properties.The screen shall launch with the tab of Advanced chosen by default.Beneath the Performance section, click on the Settings option.Finally, mark the “Show thumbnails instead of icons” box.

Now, hit the Apply and then OK buttons to save the changes.Rebuild the Search IndexYou should rebuild the search index by pursuing these guidelines mentioned below:Firstly, launch the Control Panel.Then click one of the icon views in the pull-down list of View By, find and choose the Indexing Options.Once you reach the screen Indexing Options, click on the button of Advanced, then hit the Rebuild option.Configure Group PolicyYou should configure group policy by pursuing these guidelines mentioned below:Hold the Windows and S hotkeys simultaneously to open the Search section.Thereafter, input ‘group policy’ into it and select the OK button to launch the Edit Group Policy screen.Once it opens, select the ‘User Configuration’ option.Then choose the ‘Windows Components’ option.You should click on the ‘File Explorer’ option.Thereafter, find the setting of “Turn off the caching of thumbnails in hidden thumbs.db files” and click on it to its Properties.In case it has changed to ‘Not Configured,’ then change it to the ‘Enabled’ option.Later, hit the Apply and then OK buttons to save the changes.Now, reboot the system for the modifications to take effect.Change the Size of Thumbnail CacheYou should change the size of the thumbnail cache by pursuing these guidelines mentioned below:Hold the Windows and R hotkeys simultaneously to invoke the Run pop-up.Then insert “regedi.exe” into it and press the Enter button.You should select the Yes button over the UAC pop-up to continue.Go to the pursuing path: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\ExploreYou should view a bunch of values and reach the blank area, then right-click on it.After that, choose the New option and select the ‘String Value’ option.Later, give the fresh value the term “Maximum Cached Icons.”Reach the screen of Edit String, input this value 4096 then select the OK button.Tweak the RegistryYou can tweak the registry by pursuing these guidelines mentioned below:Hit the Windows icon to launch the Search section on your system.Thereafter, insert “regedit.exe” into it and select the OK button.Hit the Yes button once you see the UAC pop-up.Reach the pursuing path: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\VolumeCaches\Thumbnail CacheYou can get two values here: Autorun and Default.Now, double-click on Autorun and modify its value to 0.Source: How to Make Thumbnails Load Faster on Windows 10?

collect
0
James Boond 2020-09-10
img

If your Wi-Fi is working but the wired ethernet connection is not, then you should disable the WiFi.

When Windows 10 can access both the Wi-Fi and the ethernet connection, then it prioritizes the latter.

So, if you turn off the wi-fi, you can find out if the ethernet connection is working or not.

To fix ethernet connection issues, follow the solutions mentioned below.Update the Drivers ManuallyYou should pursue these steps provided below:Navigate to the Windows icon, and right-click on it, then choose the Device Manager option.After that, select the list of Network adapters and expand it, then check if any problems are using the devices.Then reach the Ethernet card and identify it.Later right-click on it, and choose the Properties option.Once you reach the screen of Device status, it may say that the device is operating correctly.Now, in case the icon of the Ethernet controller has an exclamation point or a question mark, then install the right driver for it again.Ensure that the Connection is Turned onYou should pursue these steps provided below:Go to the Windows menu, and right-click on it, then choose the Network connections.Now, right-click on it and choose the Enable option.Check the Connection DetailsYou should pursue these steps provided below:Reach the connection of Ethernet and right-click on it, then choose the Properties option.Once you reach the screen of ‘Ethernet Properties’, select the option of ‘Internet Protocol Version 4 (TCP/IPv4)’ then twice click on it.Turn on these options: ‘Obtain DNS server address automatically’ and ‘Obtain an IP address automatically.’Launch the Internet Connection TroubleshooterYou should pursue these steps provided below:Go to  the Search section.Thereafter, type and enter ‘Update and Security’.You have to choose the ‘Troubleshooter’ option.Now, choose and open the ‘Internet connection troubleshooter’ option.Check whether the connection of Ethernet is available.Finally, reboot the system and check once again.Roll Back the Network Adapter DriverYou should pursue these steps provided below:Open the Device Manager.Then select the Network adapters and choose the ‘network adapter’ option.Later, right-click on it then choose the Properties.Once you reach the Properties screen, choose the tab of Driver, and select the ‘Roll Back Driver’ option.Pursue the on-screen instructions to install an earlier version of the driver.In case the option is unavailable, that means there is no driver to roll back to.Disable the FirewallYou should pursue these steps provided below:Launch the Windows Firewall.Disable it.Now, check the Ethernet connection once again.Reset the NetworkYou should pursue these steps provided below:Reach the Settings screen, choose the ‘Network & Internet’ option, and then select the Status option.Then find the option of ‘Network reset.’Now, click on the button of ‘Reset now’ and hit the Yes button.By following the troubleshooting tips mentioned above, you will be able to fix the ethernet connection issues on your Windows 10 device.JEANNE E. WINFIELD arrived on the cyber security scene in the early 2000s when virus and malware were still new and slowly evolving.

Her longtime affair with writing with an interest in the cybersecurity industry, combined with her IT degree, has contributed to experience several aspects of security suite industry such as blogging at mcafee.com/activate.

Source : How to Fix Ethernet Connection Problems in Windows 10

faina hassan 2020-09-24

Well, if your answer is yes, then this guide is for you because today, we are going to teach you exactly how you can do this and use your voice to control your Windows 10 computer.

So, let’s get started.Here’s how you can set up voice control for your Windows 10 computer.Sources: https://a1activate.co.uk/blog/post/130054/how-to-set-up-voice-control-on-windows-10Buy a Right MicrophoneIf you want to control your Windows 10 computer, you will require a good microphone to give your commands to it.

Yes, of course, you can use your laptops or webcams microphone, but these microphones are for normal use and may not be a good option if you will use them to control your computer system.

Note: You may see a warning popup on your screen.

Now follow all the on-screen instructions to set up your mic.8.

Next, you will be asked to calibrate your mic by reading a sentence.9.

Edward Lewis 2020-01-14
img

System restore is very useful to the users who have no time to restore manually.

Restore point able to help you to do your work without any condition, and save your lots of time, you waste in troubleshooting.

If Windows creates Systems Restored Points Frequently, then you have to make your Windows PC arrange for the scheduled time.How to Perform System Restore Points automaticallyWe know that Windows owned inbuilt features and settings, where users quickly set their Windows PC to restore Points, every day, or weekly in one click, however, there is also a manually setting available.

If you make another attempt, then it will be skipped automatically.

Here are the steps to do.Launched Open Registry Editor and cruise the listed keys.Double click on SystemRestorePointCreationFrequency to edit DWORD.Change the entire value 0.Always remember that Windows cant skip Creating restore point.By System Restore point methodCheckpoint-Computer -Description “TWC – Restore Point” -RestorePointtype MODIFY_SETTING (Command will be used to treat Restore point).Here are some examples of the command helps you to create a restore point.How to APPLICATION INSTALLHow To APPLICATION UNINSTALLHow To DEVICE DRIVER INSTALLHow To CANCELED OPERATIONYou can similarly create a restore point using WMIC.EXE.

here we explained how to Generate the Restore point automatically./Namespace:\\root\default Path SystemRestore Call CreateRestorePoint “Startup Restore Point”, 100, 7Create a Task in Task SchedulerIn the above task mentioned scheduler with power shell where you have to create and schedule tasks.To promote type taskschd.

James Boond 2020-09-10
img

In this article, we will discuss the reasons behind the “Windows was unable to complete the format” error, along with the various practical ways to fix it.

If you have a Windows 10 PC and are unable to format a USB drive because of this error, then read on and follow the fixes mentioned below.Launch a Check Disk ScanYou should follow the steps provided below:Hold the Windows and E buttons simultaneously to launch the File Explorer.Thereafter, connect the flash drive to start scanning the USB port.You should select the ‘This PC’ icon over the desktop.Then select the flash drive and right-click on it to launch its menu.Go to the Properties option.You have to choose the option of Tools and click on OK.You will see a screen which says, ‘You don’t need to scan this drive.’You should start a manual scan by choosing the option of ‘Scan and repair drive.’Format the USB Drive with Disk ManagementYou need to follow provided below:Open the Run prompt.After that, insert ‘diskmgmt.msc’ into it, and press the OK button.Go to the USB stick and right-click on it over the screen of Disk Management, then choose the Format button.You should click on the button of Yes.Later, you should choose a file system to format the flash storage.Hit the button of OK to start the format process.Navigate to the ‘New Simple Volume’ option.Now, format the USB drive using the ‘New Simple Volume Wizard.’Format the Drive with Diskpart Follow the steps given below.Access the Win + X menu.Then choose Command Prompt.In Command Prompt, insert ‘diskpart’ and hit the Return button.You should input ‘list disk’ into it and hit the Return key to launch a drives list.In the Diskpart screen, type ‘select disk n’ into it and hit the Enter button.However, change ‘n’ with the concrete disk number of the USB stick.You should input the ‘clean’ command in it and hit the Return button.Later, insert the ‘create partition primary’ command into the Diskpart.Now, type ‘format fs=ntfs quick’ then hit the Enter key to format the USB drive via NTFS.These were some of the potential solutions for the Windows was unable to complete the formatting error.Robert Hunt is a creative person who has been writing blogs and articles about cybersecurity.

He writes about the latest updates regarding mcafee.com/activate and how it can improve the work experience of users.

His articles have been published in many popular e-magazines, blogs and websites.

Source : Windows 10 PC Won’t Complete the Formatting?

Ella johnson 2021-08-02

Windows 10 offers many features, and a map network drive is one of them.

It is used with consistency, ease of access, and network setup efficiency.

But recently, numerous users have complained that once updated from v1909 to v2004, Windows 10 unable to map network drive.

If you are getting into exact trouble, then you can pursue this article.Update the 20H2 VersionTo update the 20H2 version, follow these on-screen directions given below:First and foremost, launch the Settings app by pressing Win and I button all over the keyboard.After that, reach the ‘Update & Security’ option and select it.You should reach the left-hand side of the screen and choose the Windows Update option.Then hit the ‘Update & Security’ option.Look beneath the ‘Update & Security’ section and pick the ‘Download and Install’ option.Finally, hit the ‘Restart Now’ button to apply the changes.Add the ProviderFlags Registry ValueTo add the Provider Flags registry value, follow these on-screen directions given below:First of all, invoke the Run accessory by holding the Win and R buttons altogether over the keyboard.After that, type ‘regedit’ into it and hit the Enter button to launch the Registry Editor.You should find the pursuing path: HKEY_CURRENT_USER\Network\Then make a fresh DWORD (32-bit) value named ProviderFlags.Thereafter, twice click on your created value, and inside the box of Value data, input 1.You should redo this process for every mapped network drive over the system.Later, hit the OK button and shut the Registry Editor screen.Now, reboot the system.Utilize the Local Group Policy EditorTo utilize the Local Group Policy Editor, follow these on-screen directions given below:Open the Run accessory by pressing the Win and R keys at once on the keyboard.Once invoked, input ‘gpedit.msc’ into it and hit the Enter key.After getting the ‘Local Group Policy Editor’ screen, choose the ‘Local Computer Policy’ option.You should extend the ‘Computer Configuration’ option and select the ‘Administrative Templates’ option.Navigate to the right-hand side and twice click on the System option.You have to move down to Logon and twice click on it.Then choose the ‘Exclude credential providers’ option and reach the left-hand side, pick the ‘policy settings’ option.Later, select the Enabled circle icon and then hit the Apply button.Now, hit the OK button and reboot the system.Utilize a Batch FileTo utilize a batch file, follow these on-screen directions given below:Go to the Notepad and launch it on your device.After that, copy and paste the pursuing lines in the launched Notepad screen:Ø timeout /t 30Ø net use z: “\\network name\shared folder” /persistent:noLater store the file as mapdrive.bat.Thereafter, open the Run accessory by pressing the Win and R keys at once on the keyboard.Now, insert ‘shell:startup’ into it and hit the Enter key.After launching the Startup folder, input the batch file mapdrive.bat or its shortcut into it.Utilize Credential ManagerTo utilize credential manager, follow these on-screen directions given below:Launch the Control Panel on the system.After that, select the User Accounts option.Then click on the ‘Manage your credentials’ option.You should hit the ‘Windows Credentials’ option.Thereafter, extend the ‘Windows Credentials’ option beside the network computer name.Later, hit the Remove button in sort to remove the sorted details from the specific system or share.Hit the Yes button once you are requested whether you are sure you would like to remove these Windows details permanently.Now, shut the Credential screen and launch the This PC icon.Then, right-click on your mapped drive and choose the Disconnect option.10.Finally, reboot the system and map the network drive once again.Ella johnson has extensive expertise in Microsoft Office and has spent a good part of her life working in the technical industry.

Ella has written several technical blogs, manuals, and reviews for several renowned websites.visit here: Windows 10 Can’t Map Network Drive: Here Are The Fixes 

Delhi Magazines 2020-08-28
img

Nowadays, most of the Windows 10 users are complaining that they can’t locate the button or any option to adjust the level of brightness in the Notification Center or the taskbar.

Users have to search for brightness settings in the Settings application, and it is a very lengthy process.

In order to get the brightness slider on the desktop, follow the instructions given below.Make Changes in the Device ManagerYou should follow the steps provided below:Hit the Windows and R buttons to launch the Run box.After that, insert ‘devmgmt.msc’ and hit the Enter button to launch the Device Manager.You should select the arrow icon beside the Device Manager and select the only device you locate there and right-click on it.Then select the option of Enable device, if applicable.Thereafter, click on the option of Properties and reach the Driver section.

Confirm if the Device Provider is anyone but Microsoft.

If yes, then click on UninstallGo to the Device Manager, then select the Action option and choose the option of ‘Scan for hardware changes,’ and this will look for devices without any driver, then install them again automatically.Now, verify any pop-ups or dialogs that may appear on the screen.Update the Graphic Card DriverYou should follow the steps provided below:Press the Windows and R keys to open the Run box.Thereafter, insert ‘devmgmt.msc’ and hit the Enter key to open the Device Manager.Extend the section of Display adapters and select the graphics card, then right-click on it.Go to the Uninstall Device option.You should verify any dialogs or pop-ups that may appear on the screen.Check the graphics card driver.

Insert the needed detail about the card and OS then select the Submit or Search option.Then you will see each driver on the list, and don’t forget to move down until you see the needed entry, select the name and click on the Download button.Once you see the screen of ‘Installation Options,’ select the option of ‘Custom (Advanced)’ before clicking on Next.Mark the box of ‘Perform a clean installation’ and then press the Next button to install the driver.Check if the problem has been resolved or not.By following the instructions mentioned above, you will be able to get back the missing brightness slider on your Windows 10 device.

john smith 2019-12-10
img

“Mixer” is the broadcasting and streaming service provided by “Microsoft Corporations.” With the help of “Mixer,” you can make a video of your gaming skills and then stream or broadcast it as you wish.

However, you can encounter an error stating “Broadcasting isn’t working.” Read through the blog to fix the issue.Uses of Mixer“Mixer” is basically a build-in streaming service developed for gaming purposes.

Playing games not only entertains the players, but it also entertains and makes others excited when they watch fun game plays.Here are the uses and benefits of “Mixer” :The players can make their own professional gaming videos based on their skills and techniques.The player can broadcast his video online and share it with others through its streaming and sharing features.You need not download any other 3rd party software or program for streaming or broadcasting your game.You can watch your broadcasted game that you have streamed earlier.It has various features for streaming and broadcasting.Sometimes, while launching “Mixer” on Windows 10, it flashes an error message regarding broadcasting issues.The error message might be as “Broadcasting isn’t working,” or sometimes it crashes on just launching it in a second.Here is how to troubleshoot the issue of broadcasting in the following ways:1.

Resetting Game BarFollow these steps if you wish to reset the Mixer by resetting the “Game Bar”:First of all, tap on “‘Windows.”After that, go to the start menu and hit the “Settings” icon that appears as a cogwheel.Then, enter “Game Bar” in the provided search bar.After a while, the Game Bar option will open.

Then, you have to hit the “Game Bar” there.Now, select “Advanced.”Next, look for the “Reset” tab by scrolling down the page.Hit the “Reset” tab.2.

Permitting Windows 10 to Run Applications Under BackgroundWhen you play a specific game, some of the applications will become disabled to give you a smoother experience for playing the game.First of all, you have to make sure that the “Game Bar” is not included in the list of deactivated apps running in the background.You have to make sure that the apps running in the background are turned “ON.”First and foremost, tap on “Windows.”After that, hit the “Settings” option there.Now, tap on “Privacy.”Next, navigate to the section tab of Background Applications.Now, check the option “Let applications run in the background” slide bar is switched “On.” If not, turn it on instantly through the slide bar.I’m John Smith.

faina hassan 2020-03-05

At times when everything is not working normally, then users may have to explore the Network settings of the operating system of Windows 10.

For instance, if they have the currently updated machine and attempted to launch the Properties of the Network connection, then they may get an error message, “An unexpected error occurred.” If you need to fix the error, then you are on the right post.

Read through the blog to follow the instructions to resolve the issue completely.Source By : https://quick-enbooks-info.com/blog/fix-an-unexpected-error-occurred-in-network-connections-properties-of-windows-10/Unexpected Error Occurred in Network Connections PropertiesInstall again or uninstall the Network adapterStop the IPv6 protocolUpdate Ethernet adapter driverCheck the DNS server addressReinstall or Install the Network AdapterIf you want to reinstall or install the Network adapter, then you can follow the provided steps:Tap on Search.Insert the Device Manager and then select to launch it.Then enlarge the Network adapters section.Right-click on the Network adapter.Choose the Uninstall Device option.Tap on Action tab.Choose the Scan for hardware changes button and tap on it.Windows will then start scanning the system instantly and then check the hardware changes.

It is going to insert a network adapter to list.Launch the Internet properties and then check for the upgrades.Disable the IPv6 ProtocolIf you wish to disable the IPv6 protocol, then pursue the given instructions:Head over to Control Panel.Navigate to Network and Internet.Select the Network and Sharing Center option at the right.Tap on Change adapter settings.Right-click on an Ethernet adapter.Choose the Properties options.Scroll down the Protocol Version 6 below the Network window and untick the box.Hit the OK button to apply the changes.Right-click on an Ethernet adapter.Choose the Properties options.Then check whether the changes have made or not.Update the Ethernet Adapter DriveIf you want to update the Ethernet adapter drive, then abide by the given steps:Launch Device Manager.Tap on Network adapters.Right-click on the Ethernet adapter.Choose the Update Drive button.Press the Locate the updated driver software automatically button in the new tab.Windows will then scan the Internet for the awaiting driver update and then download driver.After installing, start the PC again.Check the DNS Server AddressIn case you need to check the DNS server address, then you need to follow the offered steps:Open Control Panel.Head over to Network and Internet.Select the Network and Sharing Center option at the right.Click on Change adapter settings.Right-click on an Ethernet adapter.Choose the Properties options.Tap twice on Internet Protocol Version 4 option.Click on Use the DNS server addresses button.Insert the given DNS server address on the Preferred and DNS server box.8.8.8.88.8.84.4Hit the OK button to apply the changes.Alexa Thomson is an inventive person who has been doing intensive research in particular topics and writing blogs and articles on quickbooks support and many other accounting software-related topics.

She is a very knowledgeable person with lots of experience. 

sahil 2022-03-15
img
You recently bought a new computer equipped with  Windows 10 and, accustomed as you are to the old versions of the Microsoft operating system, having to deal with the new interface of the latter has almost blown you away! So what else are you waiting to get started? IndexOpen USB stick via autoplayOpen USB stick via File ExplorerOpen USB stick via Disk ManagementIn case of problemsOpen USB stick via autoplayThe first method to open a USB key on Windows 10, as well as the simplest, is to use the automatic playback feature of the Microsoft operating system: in doing so, Windows will propose a series of choices to manage the drive just inserted into the system; choices that can be selected with a click. READ MORE:- https://techjustify. com/how-to-open-a-usb-stick-on-windows-10/
Ella johnson 2021-05-29
img

Windows 10 operating system makes it easier for every user to accomplish any computing task.

Any Windows 10 user can easily customize the settings on their computer system as per their preferences.

Here, we are going to provide you with multiple techniques that you can follow to create multiple folders at the same time on your Windows 10 computer.

You can use a keyboard shortcut “Ctrl + Shift + N” for creating a set of folders.

Here, we have mentioned two different techniques, and each one includes some simple steps that you will have to follow.

After clicking the Start button, type “cmd” in the search bar and then press the enter key.

Edward Lewis 2019-12-19
img

When users try to update Windows 10, and they receive 0x800f0988 error, then the given instructions may solve the issue.

Users can also get the error 0x80073701 in the place of 0x800f0988.

If you are facing the same trouble while updating, then this post might be helpful for you.

Go through the blog and follow the steps to fix the updates failed error 0x800f0988 on Windows 10.How to Fix the Error 0x800f0988If  you want to fix the Error 0x800f0988, then you can do these things:Run Update Troubleshooter of WindowsRun StartComponentCleanup Task via DISM otherwise Task SchedulerRun Update Troubleshooter of WindowsIf you want to Update Troubleshooter of Windows, then abide by the given steps:Launch Windows 10 Settings via pressing Win + I.Tap on the Update and Security option, then go to Troubleshoot.Find the Windows Update, then press it, and select the tab of Run troubleshooter.This will check the awaited restart, format the diagnosis then start the service like BITS again.Check the updates as users should not face 0x80073701 or 0x800f0988 code, any such errors.Run StartComponentCleanup Task via DISM otherwise Task SchedulerBefore running it, users should know about  StartComponentCleanup.

This is a tool that was launched into Windows 10 to clear its component when users are not using it.How to Run the Startcomponentcleanup via Task ManagerIn case you intend to run the StartComponentCleanup via Task manager, then go through the below-mentioned steps:Launch Run prompt, input taskschd.msc.Press Enter to open the Task Scheduler.Go to Library\Microsoft\Windows\ServicingChoose the StartComponentCleanup option, right-click then click run option.Wait for the procedure to finish, and then check for any updates.How to Run the Startcomponentcleanup via DISMIf you want to run the StartComponentCleanup via DISM, then you can follow the provided steps:Launch the Command Prompt with admin rights.Input or copy is given a command in Command box:dism /online /cleanup-image /start-component cleanupPress Enter, then wait for the command to finish.Start the PC then check for any updates.Among this, users can also use other switches or ResetBase to delete the superseded versions of each element in the store.Then input the given command:Dism.exe /online /Cleanup-Image /StartComponentCleanup /ResetBaseGenerally, the reason for the occurring error is old components, so the use of Start Component Cleanup may fix the problem.Edward Lewis is a creative person who has been writing blogs and articles about cyber security.

He writes about the latest updates regarding trendmicro.com/activation and how it can improve the work experience of users.

sahil 2022-03-09
img
Do you have to reinstall your copy of Windows 10 but you can’t find the certificate with the Product Key and therefore you don’t know how to recover it? The Windows Product Key consists of an alphanumeric sequence of 25 characters, arranged as follows: XXXXX-XXXXX-XXXXX-XXXXX-XXXXX, and is used to verify the authenticity of your operating system. IndexHow to recover Windows 10 product keyHow to recover Windows Product Key associated with a digital licenseWhat if I lost the Product Key instead? How to recover Windows 10 product keyNow let’s see how to recover the product key of your Windows 10 operating system. Now, the blue screen, next to C: \ WINDOWS \ system32 folder, type: (Get-WmiObject -query ‘select * from SoftwareLicensingService’).
Ella johnson 2021-08-04
img

When a Windows 10 user tries to remove the Windows 10 profile, he might get a ‘Profile not deleted completely’ error.

This specific error is complained about on all Windows 10 editions.

If you are also struggling with this error, you can follow these resolutions provided below.Turn off Windows SearchTo turn off Windows search, pursue these on-screen instructions mentioned below:To launch the Run accessory, use the Win and R keys combination over the keyboard.After that, insert ‘services.msc’ in the Run box and select the OK button.Once you get a UAC (User Account Control) pop-up, hit the Yes button.After going to the Services window, move on to the right side and go down via the available services list until you find the Windows Search see If service.Once you manage to find the right service listing, right-click on it, then select the ‘Stop’ button via the context menu.After stopping the service successfully, launch the Run accessory by pursuing the above steps.Then insert ‘SystemPropertiesAdvanced’ and hit the Enter button to invoke the System Properties window.You should enter the Advanced tab via the upper menu and select the Settings option related to the User Profiles.After going to the User Profile menu, choose the profile you would like to get rid of and hit the Delete option and verify the method to delete it properly.10.Once you have managed to delete the suspicious Windows profile without facing the exact ‘Profile not deleted completely’ error.

Hold the Win and R buttons simultaneously to launch another Run pop-up.11.Afterward, insert ‘services.msc’ into it and select the OK button to launch the Services window.

Once you see the UAC (User Account Control) prompt, press the Yes button.12.Once you returned successfully to the Services window, find the Windows Search service again via the right-side section, enable it again by right-clicking on it, and then select the Start button.Remove the Leftover Registry KeysTo remove the leftover registry keys, pursue these on-screen instructions mentioned below:To open the File Explorer, use the Win and E buttons simultaneously on the keyboard.Then go to the C:\Users folder and click on it.Then, find the folder named once the folder you would like to get rid of.Once you get it, right-click on the right folder and hit the Delete button via the context menu.Open the Run prompt by using Win and R keys altogether on your keyboard.Then insert ‘regedit’ into it and hit the OK button to bring up the Registry Editor screen.You will get a UAC (User Account Control) pop-up and then click on the Yes button.After that, utilize the left pane menu to enter the following location: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileListBeneath the ProfileList section, you will see the keys series-parallel to a Windows Profile.

The job is to enter each entry and look at the ‘ProfileImagePath’ data related to it.10.After managing to detect the right ProfileList key that includes remnants of profile data, right-click on it, then pick the Delete button.11.Now, reboot the system.Remove the Unknown AccountTo remove the unknown account, pursue these on-screen instructions mentioned below:Invoke the Run accessory by using Win and R buttons simultaneously on your keyboard.Once it opens, insert ‘sysdm.cpl’ in it and hit the OK button.After launching the ‘System Properties’ window, select the ‘Advanced’ tab, then choose the Settings option related to the User Profiles.After getting UAC (User Account Control) pop-up, press the Yes button.Go to the User Profiles menu, choose the ‘Account Unknown‘ profile, and then hit the Delete button.Finally, reboot the system and check the issue.Ella johnson has extensive expertise in Microsoft Office and has spent a good part of her life working in the technical industry.

alexa thomson 2020-04-06

If you are troubling with the annoying issue of TTM_WATCHDOG_TIMEOUT error, then this article will help you out.

The error will cause your system to freeze and constantly reboot automatically.

So here are the steps to quickly repair the error.Prevent Rebooting AutomaticallyIn case you intend to prevent rebooting automatically, then you can opt to follow the below-mentioned guidelines.Hold the Win + D keys at the same time on your system to reach the desktop and shut the all active process.Go to the This PC and right-click on it.

Then choose the Properties option.After launching the System screen through the Control Panel, click on the Advanced system settings.You will see a prompt wizard with System Properties, and you require to move in the Advanced section.Go to the System failure tab and untick the box of ‘Automatically restart.’Now, click on the OK button, shut the wizard.Source By : https://quick-enbooks-info.com/blog/how-to-fix-ttm_watchdog_timeout-in-windows-10/Launch Blue Screen Troubleshooter If the users are trying to launch a blue screen troubleshooter, then they should carefully apply the given steps.You should click on the Start menu on your system.After that, reach the Settings application and click on it.Select the Update and Security tab to launch the additional settings screen.Go to the new screen and select the Troubleshoot option from the left-hand side panel.You have to continue to the Blue Screen and select it.Then click on ‘Run the Troubleshooter’ and allow the repairing to start.Now, the troubleshooting procedure will end itself.Boot the System in Safe Mode and Load Basic Procedures OnlyIn case you intend to boot the system in safe mode and load basic procedures only, then you can opt to follow the below-mentioned guidelines.Go to the Start menu and right-click on it.After that, click on the Run to launch on your screen.Then input ‘msconfig’ into it and hit the Enter key.You will see a wizard of System Configuration, move to the Boot section.Reach the options of Boot and tick the box of Safe boot.Tick the radio option next to Minimal pursued by selecting the OK button.Thereafter, click on the Restart option to continue.Upgrade Device DriversIf the users are trying to upgrade the device drivers, then they should carefully apply the given steps.Hold the Win + S keys at the same time on your system to launch the Taskbar Search.After that, input ‘device manager’ into it and hit the Enter key.Go to the console and find things having an exclamation sign.You should extend the system by selecting and, once extended, check for the yellow color warning mark drivers.Then reach every driver and right-click on it.After finishing the update procedure, reboot the system.Upgraded Windows 10In case you intend to upgrade Windows 10, then you can opt to follow the below-mentioned guidelines.Hold the Win + I keys at the same time on your system to launch the Settings application.After that, reach the Update and Security option and select it.Then click on the Windows Update option from the left-hand side panel.You should select the ‘Check for updates’ button.After this, searching will begin quickly, and once completed, click on the Download option beneath each item individually.Remove the Duplicate AppsIf the users are trying to remove the duplicate apps, then they should carefully apply the given steps.Navigate to the Start logo on your system and right-click on it.After that, click on the Apps and Features option.You should click on the Uninstall option from t extended panel.Then pursue the on-screen steps to complete the procedure.You have to reboot the device, and after log-in again, look whether the issue has gone or not.Return to Earlier Restore Point to Undo Current ModificationsIn case you intend to return to an earlier restore point to undo current modifications, then you can opt to follow the below-mentioned guidelines.Hold the Win + R keys at the same on your system to launch the Run section.After that, input ‘rstrui’ into it and hit the Enter key.Go to the wizard of System Restore showing subsequently, click on the Next option.After generating restore points, tick the box of ‘Show more restore points.’Now, click on the Finish button to begin the restoring procedure.Launch Windows 10 File Checker in Elevated Command PromptIf the users are trying to launch Windows 10 file checker in an elevated command prompt, then they should carefully apply the given steps.Go to the lower left-hand side of the screen and select the search button from the Taskbar.Thereafter, input ‘cmd.exe’ into it and hit the Enter key.After showing the Command Prompt, perform a right-click on it and click on the Run as Administrator.Then UAC will ask you for permission in rolled in prompt.Click on the Yes button to a given consent.Input ‘sfc /scannow’ into it and hit the Enter key.When you see any malware file, this will be repaired instinctively.Uninstall AntivirusIn case you intend to uninstall the antivirus, then you can opt to follow the below-mentioned guidelines.Hold the Win + I keys at the same time on your system to launch the Settings app.Go to the ‘Apps and features’ and click on it.Then you should click on the ‘Anti-malware software.’Navigate to the Uninstall button and click on it from the expanded panel to allow the procedure to start.You have to pursue the existing steps to delete it from the PC properly.Now, reboot the system.Remove Doubtful Files of Windows UpdateIf the users are trying to remove doubtful files of Windows update, then they should carefully apply the given steps.Navigate to the Start logo and select the Settings app on your system.After that, click on the Update and Security option.You should click on the Windows Update from the left-hand side panel.Select the View Update History.Go to the next screen with a past update list, select the entitles option with Uninstall update.Alexa Thomson is an inventive person who has been doing intensive research in particular topics and writing blogs and articles on turbotax support and many other accounting software-related topics.

She is a very knowledgeable person with lots of experience.

Microprokey.com 2022-04-02
Once you upgrade to Windows 10, all the Microsoft updates and features of the newly updated operating system will be available to you. The license you will receive also enables you to upgrade from Windows 10 Home to Professional, if necessary. Compatible with: Office 2019 â€“ Office 2016 â€“ Office 2013 â€“ Office 2010 is also available Microsoft Office for MAC. Other available Operating Systems: Windows 11 â€“ Windows 8 â€“ Windows 7. (lifetime license)This Microsoft license is a lifetime license.
karen jodes 2020-10-27

When you open folders that have new documents in them, then Windows will take a while for generating the thumbnail previews for the folder.

But when you open up folders that you have previously opened, Windows will be able to display the thumbnail icons very quickly because it stores the pictures it uses on the hard drive.

If you want to make thumbnails load faster on Windows 10, then read on.See Whether the Thumbnail Option is Turned offYou can see if the thumbnail option is turned off by pursuing these guidelines mentioned below:Hit the Windows icon to invoke the Search section on your system.Thereafter, insert ‘control panel’ into it and select the OK button to launch the Control Panel.Once it opens, select the settings of the ‘System and Security’ option and choose the System link.Reach the left side panel and go to the option of ‘Advanced System Settings’, select it, to invoke the System Properties.The screen shall launch with the tab of Advanced chosen by default.Beneath the Performance section, click on the Settings option.Finally, mark the “Show thumbnails instead of icons” box.

Now, hit the Apply and then OK buttons to save the changes.Rebuild the Search IndexYou should rebuild the search index by pursuing these guidelines mentioned below:Firstly, launch the Control Panel.Then click one of the icon views in the pull-down list of View By, find and choose the Indexing Options.Once you reach the screen Indexing Options, click on the button of Advanced, then hit the Rebuild option.Configure Group PolicyYou should configure group policy by pursuing these guidelines mentioned below:Hold the Windows and S hotkeys simultaneously to open the Search section.Thereafter, input ‘group policy’ into it and select the OK button to launch the Edit Group Policy screen.Once it opens, select the ‘User Configuration’ option.Then choose the ‘Windows Components’ option.You should click on the ‘File Explorer’ option.Thereafter, find the setting of “Turn off the caching of thumbnails in hidden thumbs.db files” and click on it to its Properties.In case it has changed to ‘Not Configured,’ then change it to the ‘Enabled’ option.Later, hit the Apply and then OK buttons to save the changes.Now, reboot the system for the modifications to take effect.Change the Size of Thumbnail CacheYou should change the size of the thumbnail cache by pursuing these guidelines mentioned below:Hold the Windows and R hotkeys simultaneously to invoke the Run pop-up.Then insert “regedi.exe” into it and press the Enter button.You should select the Yes button over the UAC pop-up to continue.Go to the pursuing path: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\ExploreYou should view a bunch of values and reach the blank area, then right-click on it.After that, choose the New option and select the ‘String Value’ option.Later, give the fresh value the term “Maximum Cached Icons.”Reach the screen of Edit String, input this value 4096 then select the OK button.Tweak the RegistryYou can tweak the registry by pursuing these guidelines mentioned below:Hit the Windows icon to launch the Search section on your system.Thereafter, insert “regedit.exe” into it and select the OK button.Hit the Yes button once you see the UAC pop-up.Reach the pursuing path: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\VolumeCaches\Thumbnail CacheYou can get two values here: Autorun and Default.Now, double-click on Autorun and modify its value to 0.Source: How to Make Thumbnails Load Faster on Windows 10?

1 of 7