Here are a few myths about metal roofs that you must note in order to understand the facts.Metal roofs can attract lighteningLightening can strike whichever is close to it.

Lightening actually looks forward to discharge the excess electricity into the ground.

While metal can conduct electricity, it does not attract lightening.

Metal roofs can in fact disperse the electrical energy safely through the structure of your building and help dissipate the effects of lightening.Metal roofs make loud noise during downpoursWhile metal roof that is not supported by walls can make noise under rains, the metal roof of a house does not make such an amount of noise.

The roof deck and insulation forming part of the roof help minimize the noise during rains.

Metal roofs of these days are in fact quitter than most other roofing solutions.Hails can make dents on metal roofsMetal roofs are found to be more durable and sturdier than asphalt roofs.

Some of the desirable characteristics of metal shingles sheets as roofing material include their durability, fire safety, resistance to algae and mildew growth, low weight, wind resistance, and recyclability in addition to many others we can add to the list.

Why metal shingles for roofing?Metal shingles are achieved creating an air space in between the metal and the roof deck.

Study results published by Florida Solar Energy Center tell us that the brown metal shingles endowed with a high reflectance capacity can reduce heat gain by 40.9% when compared with the conventional asphalt shingles.

This is anti-corrosive in nature and this coating protects the sheet from rusting.

In his homeat Monticello and in some other buildings, Thomas Jefferson employed metal shoot roofing.

At present, the market share of metal roofing in the residential sector is 14%, says the Metal Roofing Alliance.

For a very long time, asphalt shingles are popularly used for roofing solutions.

Here are the six problem areas with regard to asphalt shingles that make steel shingles a better option.Asphalt shingles are prone to blisteringAsphalt shingles invite blistering and contractors are often called to fix this issue.

Some factors that cause blistering are accumulation of moisture in between the layers of asphalt shingles and poor ventilation of the roof that leads to trapping of moisture.

Blistering leads to exposure of the roof, decking and the building to the nature’s elements.

Thermal shock is the most common cause for asphalt shingles to curl.

If this is left unattended, it can lead to compromising of the water-tightness.Asphalt roof can loose granulesThough this is a lesser noticed issue in asphalt shingles, granule loss refers to the detaching of the top layer of the shingle.

Today’s generation is more conscious of the environment than those of the earlier times since there is a growing threat to the wellness and safety of the environment we live in due to the human activities that have impacted the surroundings in several ways over the past few decades.

While the world is contemplating on the ways to minimize its impact on the environment, studies show metal roofs have the most minimum impact on the environment and hence it is the most environment friendly roofing solution to homes and businesses that are conscious about the carbon footprint they are likely to leave on the earth.

Here are the top reasons why metal roofs are environment friendly.Manufacturing methodsMetal roofs are manufactured using completely recycled aluminum and the major part of this is post-consumer.

This will help cut down on the energy costs by up to a minimum of 20%.

The cooling load thus lowered significantly can help extend the life of the air conditioner.Installation concernsMost metal roof solutions available today are of light weight.

This accounts for integrating the roof with most kinds of photovoltaic solar collection systems we find around us today.

While a lot of homes and businesses choose metal roofing as their singular option due to the cost effective nature of this solution and its several advantages, metal roofing calls a bit of understanding from your side so that you can make some important decisions with regard to your metal roofing project.

When it comes to single skin roofing, the three options available as per today’s industry trends include concealed fastener, exposed fastener and standing seam.Concealed fastener installationUnder the concealed fastener metal roof installation method, the fasteners are fixed and then concealed by a snap fitted over the side lap.

Concealed fastener installation technique can go well with the panel sizes of 16 inches or less width.

Generally, this technique is used on the roofing solutions that feature a 3:12 or greater slope.

In these kinds of installation environments, it is possible to install them either on conventional or wood-framed substructures.Exposed fastener installationAs part of the exposed fastener installation strategy, fastened panels that are exposed are fixed tot eh substrate with the help of fasteners that come with washers meant for facilitating weather tightness.

This kind of roofing strategy is well suited for commercial, agricultural, industrial and residential installation environments on account of its low cost, easiness of installation and the wide variety of options available to suit light applications.

There are quite a few options for homes and businesses when it comes to roofing.

When you want to consider a few options for your roofing needs, this discussion will come in handy as it highlights the benefits of metal roofing you just can’t ignore.PerformanceMetal roofs have a proven performance expectation of more than 50 years.

Studies show that withstanding the extremities of temperature, they can last for about 50 years without any maintenance issues.

In this way, they make the best option for the cost the whole metal roofing project will incur.Options to match your home elevation or neighborhoodMetal roofing materials, patterns and colors provide a good number of options and there are several good and easy ways to customize a metal roofing project to suit the elevation of your home and the environment in the neighborhood.

Hence you are in a better position to land on a great roofing solution by doing the necessary research and groundwork.Maximum wind resistance capabilitiesThese days metal roofing sheets and panels come in a variety of designs and patterns that can provide appreciable levels of wind resistance.

Also, the efficiently designed interlocking panels complement the strength and wind resistance capabilities of the metal roofing sheets.

If your current roof needs to be repaired or if you are at the point of choosing the roofing solution for your new building, you must first consider the pros and cons of metal roofing and then make the choice of the right roofing solution that will best suit your situation and laying environment.

a lot of people find metal roof or steel shingles Ottawa a highly desirable option for their roofing needs as they are not only efficient, but also require low maintenance.

Here is a list of pros and cons of metal roofing.Pros of metal roofsMetal roofs are strong, durable and last for long: Their long life span expected to be between 40 and 70 years make them a very attractive option for buildings.

In fact, more than 26 percent of the investors going for metal roofs say they are enticed by their longevity.

Metal roofs are rust proof in nature and they can ably withstand the extremities of weather as well as strong gales up to 140 miles per hour.They are environment friendly: Metal roofs are an environmental friendly option.

Asphalt sheets for instance are made from fossil fuels and hence they increase our dependency on these non-renewable sources.