sachiya steel

sachiya steel

Sachiya Steel International are manufacturers suppliers dealers exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.

Followers 0
Following 0
Sachiya Steel International is one of the Leading Manufacture And Exporter of Super Duplex Stainless Steel S32750 Wire which is resistant in carburizing and nitriding atmospheres. We supplies, worldwide, large sized duplex piping packages required for green field construction developments and services also medium – small Super Duplex S32750 Wire piping packages from stock during the advanced construction stages when short lead times are required. Super Duplex S32760 Coiled Wire is used for upstream production of oil & gas fluids, fire fighting systems, sea water desalination and high pressure RO plants. This corrosion and heat – resistant Super Duplex S32750 Coil Wire is typically used for such parts as turbine rotors, shafts, flanges, blades and bolts, requiring oxidation resistance up to 2200 Degree F and relatively high strength about 1500 Degree F. Primary function of Super Duplex S32760 Wire is to endure effectively under high – temperature, high – stress applications in a moderately till severely corrosive, and / or erosion – prone environment where more common and less expensive iron – based alloys would fail. Super Duplex Stainless Steel S32750 Wire | Super Duplex Stainless Steel S32750 Wire | Super Duplex Stainless Steel S32750 Wire Although it is a super alloy, Super Duplex S32750 Wire does experience degradation due to fabricating and handling. Due to its corrosion resistance in various atmospheres up to very high temperatures, and excellent high – temperature strength, Super Duplex S32760 Wire finds wide application in high temperature service.
Sachiya Steel International is one of the Leading Manufacture And Exporter of Duplex S31803 Wire, which is also alloyed with tungsten and / or copper.Duplex S31803 Wire takes its name from its two-phase microstructure of ferrite and austenite in approx.Duplex S31803 Coil Wire contains over 20 % chromium and approximately 5 % nickel, and it is part of the group of stainless steels.In Duplex S31803 Coiled Wire, the minimum chromium, molybdenum and nitrogen content has been increased compared to other material.Duplex S31803 Wire acquires their optimum properties with a balanced ferrite – austenite ratio of approximately 50 / 50.Compared to the austenitic stainless steels, Duplex S31803 Wire contain less nickel (approx.4 % to 8 %), which results in very good value for money.
Sachiya Steel International is one of the Leading Manufacture And Exporter of quality Nickel Alloy 201 Wire, which is one of the most widely used metals on the planet.Due to the naturally occurring iron content in lateritic ores of Nickel 201 Wire, the end product of most smelters working with such ores is ferro – nickel, which can be used by steel producers after silicon, carbon and phosphorus impurities are removed.Nickel 201 Coil Wire produces nickel oxide, which is then reduced using electric furnaces at temperatures between the ranges of 2480 Degree F – 2930 Degree F (1360 Degree C – 1610 Degree C) and volatilized to produce nickel metal and nickel sulphide.Most often, Nickel 201 Wire is found in steels and metal alloys, but it is also used in the production of batteries and permanent magnets.The nickel – containing austenitic range of Nickel 201 is defined by their face – centered cubic (FCC) crystal structure, which has one atom at each corner of the cube and one in the middle of each face.Nickel 201 Wire is primarily extracted from the nickel sulphide pentlandite, pyrrhotite, and milarite, which contain about 1 % nickel content, and the iron – containing lateritic ores limonite and garnierite, which contain about 4 % nickel content.Alloy 201 Wire is a strong, lustrous, silvery – white metal that is a staple of our daily lives.Nickel 201 Wire SpecificationsSpecifications:ASTM B160 ASME SB160Dimensions:ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360Length:100 mm TO 6000 mmDiameter:10 mm To 100 mmSpecialize:Filler Wire, Coil Wire, Electrode Wire, Welding Wire.
Sachiya Steel International is one of the Leading Manufacture And Exporter of quality Nickel Alloy 200 Wire, where chlorine additives would be an alternative.Nickel 200 Coil Wire is a Nickel based alloy containing 47.5 % Nickel, 22 % Chromium and 18.5 % Iron, with small amounts of Cobalt, Molybdenum and Tungsten.All hot – or cold – worked parts of Nickel 200 Wire should be annealed and rapidly cooled in order to restore the best balance of properties.Carbide tools in Nickel 200 Wire should have smaller angles than high – speed tools and operating speeds can be higher.After 100 hours in petroleum coke, Nickel 200 is completely penetrated by carburization; whereas its specimens showed no carburization at all.Useful Properties for Aircraft and Furnace Parts, Nickel 200 Wire is recommended especially for use in furnace applications.Alloy 200 Wire has unusual resistance to oxidizing, reducing, and neutral atmospheres, where work hardening occurs whenever a tool makes a cut.Its uncommon resistance to oxidation, combined with exceptional heat resistance and fabricability, make Alloy 200 a widely sought – after blend in a number of industries.
Sachiya Steel International is one of the Leading Manufacture And Exporter of Monel Alloy K500 Wire, which is a low alloy pressure vessel quality steel for high temperatures.Monel K500 Wire is primarily used in welded pressure vessels where improved toughness is required.Monel K500 Welding Wire is a metal alloy consisting mostly of iron, in addition to small amounts of carbon, depending on the grade and quality of the steel.Monel K500 Coil Wire is any type of steel to which one or more elements besides carbon have been intentionally added, to produce a desired physical property or characteristic.Common elements that are added to make Monel K500 are molybdenum, manganese, nickel, silicon, boron, chromium, and vanadium.These metals are added to produce specific properties for Monel K500  that is not found in regular carbon steel.Alloy K500 Filler Wire is normally used in the annealed temper, and strength characteristics described below are representative of annealed material.
Sachiya Steel International is one of the Leading Manufacture And Exporter of quality Monel Alloy 400 Wire , which is in fact used most commonly in high temperature brazing applications.Our Monel 400 Wire is generally being used when specifications call for corrosion resistance and high – temperature service properties.This Monel 400 Coil Wire can also be used in sub – zero applications as low as the temperature of liquid oxygen, helium, or nitrogen.Nickel brazing alloys have low vapor pressure, making our Monel 400 Welding Wire suited to vacuum systems and vacuum tube applications.With their joint strength and resistance to corrosion, this nickel brazing Monel 400 Electrode is ideal for jet engine parts and assemblies, food handling equipment, nuclear energy and carbide tools.Our Monel 400 Welding can only be hardened by further rolling, while showing excellent corrosion resistance, which is higher than that of pure nickel in reduced environments and better than that of copper in oxidizing environments.This Alloy 400 Electrode is a solid solution alloy that can be hardened by the process of cold working.Our Alloy 400 Filler Wire is also known as super alloy, where series of nickel – copper alloys are grouped.
Sachiya Steel International is one of the Leading Manufacture And Exporter of Hastelloy X Wire which is known for its excellent high temperature strength withstanding up to 2200 Degree F. Hastelloy X Wire can also be easily fabricated with forming and welding characteristics by both manual and automatic methods.Our Hastelloy X Coil Wires offers exceptional performance in furnace rolls or other industrial furnace applications because of the alloy’s strong resistance to oxidizing, reducing and neutral atmospheres.In addition, Hastelloy X Wire is widely used for a variety of chemical processing parts, including retorts, pyrolysis tubing, and muffles due to its exceptional resistance to stress – corrosion cracking.Our Hastelloy X wire is normally supplied in the solution – treated condition, following a treatment at 2150 Degree F (1175 Degree C) and rapid cooling.Bright annealed parts of Hastelloy X Wires are cooled in hydrogen, where high – speed steel or cast – alloy tools are recommended.The machinability rating of our Alloy X Coil Wire is 27 %, where slow speeds, positive feeds and rigid equipment are the order of the day.Alloy X Wire has low hardness, good ductility and good weldability, making the metal easy to fabricate.Our Alloy X Wire has a low work – hardening rate, but it may be cold worked to moderately high strength levels while maintaining ductility.Hastelloy X Wire SpecificationsSpecifications:AMs 5754 AMS 5798Dimensions:ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360Length:100 mm TO 6000 mmDiameter:10 mm To 100 mmSpecialize:Filler Wire, Coil Wire  X Hastelloy Wire Chemical Composition GradeCMnSiCoPFeMoNiCrSHastelloy X0.05 – 0.151.00 max1.00 max0.50 – 2.500.04 max17.00 – 20.008.00 – 10.00Balance20.50 – 23.000.03 max Hastelloy X Wire Mechanical Properties DensityMelting PointYield Strength (0.2%Offset)Tensile StrengthElongation8.22 g/cm31355 °C  MPa – 665 MPa – 24035 % Equivalent Grades for X Hastelloy Wire STANDARDWERKSTOFF NR.UNSJISENHastelloy X2.4665N06002  Hastelloy X Wire Application Industries Off-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper Industry
Sachiya Steel International is one of the well-known Manufacture And Exporter of Hastelloy B3 Wire which can be hot forged, hot rolled, hot upset, hot extruded, and hot formed.Hastelloy B3 Wire exhibits high resistance to chloride – induced pitting and crevice attack, and forms of corrosion to which the austenitic stainless steels are particularly prone.To assess the resistance of alloys to pitting and crevice attack, Hastelloy B3 Coil Wires is customary to measure their Critical Pitting Temperatures and Critical Crevice Temperatures in acidified ferric chloride, in accordance with the procedures defined in ASTM Standard.Hastelloy B3 Wire represents the lowest temperatures at which pitting and crevice attack is encountered in this solution, within 72 hours.Wrought products of our Hastelloy B3 Wire are supplied in the Mill Annealed (MA) condition, unless otherwise specified.This solution annealing procedure in Hastelloy B3 Wires has been designed to optimize the alloy’s corrosion resistance and ductility.Following all hot forming operations, our Alloy B3 Coil Wire should be re – annealed, to restore optimum properties.Alloy B3 Wire should also be re – annealed after any cold forming operations that result in an outer fiber elongation of 7 % or more.
Sachiya Steel International is one of the pioneer Manufacture and Exporter of Hastelloy Alloy B2 Wire which has excellent stress corrosion cracking resistance with very good resistance to localized attack.Hastelloy B2 Wire can be easily forged in the temperature range of 1232 Degree C – 982 Degree C (2250 Degree F – 1800 Degree F).Stringent chemistry control for Hastelloy B2 Wire along with years of development has resulted in the alloy used today.The Corrosion – Resistant of Hastelloy B2 Coil Wire are widely used by the chemical processing industries.The need for reliable performance in Hastelloy B2 Wire leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.The attributes of Hastelloy B2 Wire include high resistance to uniform attack, outstanding localized corrosion resistance, excellent stress corrosion cracking resistance, and ease of welding and fabrication.Alloy B2 Wire possesses outstanding resistance to non – oxidizing acids, such as hydrochloric acid and sulphuric acid.The advantages of Alloy B2 Coil Wire over previous B-family alloys are enhanced thermal stability and improved fabrication characteristics.
Sachiya Steel International is one of the pioneer Manufacture and Exporter of Hastelloy C276 Wire which is considered moderate –  to – difficult to machine, but can be machined using conventional methods.Our Hastelloy C276 Wire offer faster machining speeds, longer tool life, improved part quality, and lower total cost of machined parts.This Hastelloy C276 Coil Wire is non – magnetic in the annealed condition but may possibly become slightly magnetic as a result of cold working or welding.Our Hastelloy C276 Wire is versatile, general purpose stainless steels with good resistance to atmospheric corrosion, to a lot of organic and inorganic chemicals, and to foods and beverages.This Hastelloy C276 Coil Wire has as well been used in vacuum processing equipment and specialized instruments where high integrity is essential.Our Hastelloy C276 Electrode offer faster machining speeds, longer tool life, improved part quality, and lower total cost of machined parts.This Alloy C276 Filler Wire is forged between 2250 Degree F / 1750 Degree F (1230 Degree C / 955 Degree C) following a soak at forging temperature of 30 minutes per inch of billet or ingot section thickness.Forging of our Alloy C276 Wire should be started immediately when the stock is removed from the reheat furnace and 25 % / 40 % reductions help to retain as much internal heat as possible.Hastelloy C276 Wire SpecificationsSpecifications:ASTM B574 ASME SB574Dimensions:ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360Length:100 mm TO 6000 mmDiameter:10 mm To 100 mmSpecialize:Filler Wire, Coil Wire C276 Hastelloy Wire Chemical CompositionHastelloy C276NiCMoMnSiFePSCoCrBalance0.010 max15.00 – 17.001.00 max0.08 max4.00 – 7.000.04 max0.03 max2.5 max14.50 – 16.50 Hastelloy C276 Wire Mechanical Properties DensityMelting PointYield Strength (0.2%Offset)Tensile StrengthElongation8.89 g/cm31370 °C (2500 °F)Psi – 52,000 , MPa – 355Psi – 1,15,000 , MPa – 79040 % Equivalent Grades for C276 Hastelloy Wire STANDARDUNSWERKSTOFF NR.AFNORENJISBSGOSTHastelloy C276N102762.4819–NiMo16Cr15WNW 0276–ХН65МВУ  Hastelloy C276 Wire Application Industries Off-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper Industry
Sachiya Steel International is one of the well-known manufacturers for Hastelloy C22 Wire which is selected over different alloys for the clamshell bellows after extensive testing.Analysis of corrosion resistance of the tested material can also be performed in Hastelloy C22 Wire and the results provided to the customer as a free technical service.Hastelloy C22 Wire is tested for this hydrofluoric acid pre – scrubber after the original material failed.Sleeved electro – galvanizing finishing rolls made of Hastelloy C22 Coil Wire are ready for placement in a steel finishing manufacturing line.Conditions were so severe in C-stage bleaching operations at one mill that even Hastelloy C22 Electrode welds were suspect.As a preventive maintenance measure, three millimeters was ground off each weld and replaced with a weld deposit of Hastelloy C22  Electrode.These Alloy C22 Coil Wire helps reduce defects on the rolls which is necessary to produce defect free galvanized steel for the automotive industry.Alloy C22 Wire had four times better corrosion resistance than the original material and 20 percent better than the other alloys at 150 Degree F to 200 Degree F. Solid rocket propellant effluents and salt air in Alloy C22 Wire causes pitting and crevice corrosion attack of stainless steel.
Sachiya Steel International is offering Incoloy 330 Wire to the clients, which is a patented alloy designed specifically for the heat treat industry.This Incoloy 330 Wire is an austenitic nickel – iron – chromium alloy developed to provide excellent resistance to carburizing and oxidizing atmospheres at elevated temperatures.Our SS 330 Wire combines excellent resistance to carburization and oxidation at temperatures up to 2200 Degree F (1200 Degree C) with high strength.Many factors go into the selection of this Ra 330 Coil Wire, including availability, versatility to function and resistance to a range of oxidizing and reducing atmospheres common in heat treating.Our Incoloy 330 Wire is a unique combination of various different metal which combine to form one sturdy alloy out of which sheets are manufactured.The excellent weldability of this SS 330 Electrode and its ability is to be joined very successfully to other alloys by means of different compositions.The high nickel and chromium of our Ra 330 Welding Electrode provide good resistance to oxidation and carburization.We can also appoint official certified Inspection Agencies upon request of our clients so that they can witness the material reports, dimensions and quality conformity of our Alloy 330 Wire.
Sachiya Steel International Manufacture and Exporter Incoloy 825 Wire, where annealing is done at 1750 Degree F (954 Degree C) with rapid air cool.The resistant to pitting and crevice corrosion of Incoloy 825 Wire and with appropriate heat treating, it is stable against the sensitization to inter – granular corrosion.Incoloy 825 Coil Wire has good mechanical properties at both room and elevated temperatures up to approximately 1000 Degree F. Incoloy 825 Wires offers exceptional resistance to corrosion by sulfuric and phosphoric acids and is often the most cost effective alloy in sulfuric acid service.Incoloy 825 Wire is often used in Radioactive waste handling, Nuclear fuel reprocessing, Marine exhaust systems, Pickling tank heaters, tanks, and equipment.Incoloy 825 Wire has good weldability by all conventional processes, and is developed to provide exceptional corrosion resistance in both oxidizing and reducing environments.Alloy 825 Filler Wire, in conjunction with the molybdenum and copper, also gives outstanding resistance to reducing environments such as those containing sulfuric and phosphoric acids.Typical applications of Alloy 825 Coil Wire are: phosphoric acid evaporators; pickling – tank heater, pickling hooks and equipment; etc.Alloy 825 Wire is also used in chemical processing, acid production, oil and gas well piping, propeller shafts, and more.
Sachiya Steel International offers a wide quality range of Incoloy 800 Wire which belongs to the category of super austenitic stainless steels where the general corrosion resistance is excellent.This Incoloy 800 Wire exhibits an austenite structure similar to austenitic stainless steels, and appropriate heat treatment procedures and requirements are similar.Our Incoloy 800H Wire is often used in Nitric acid catalyst supports, Reformer outlet pigtails and manifolds.Applications of this Incoloy 800HT Electrode include furnace components and equipment, pigtails and headers, sheathing for electrical heating elements and petrochemical furnace cracker tubes.In the solution annealed condition, our Incoloy 800 Coil Wire has superior creep and stress rupture properties.The chemical balance allows this Incoloy 800H Wire to exhibit excellent resistance to oxidation, carburization and nitriding atmospheres.Incoloy 800HT Welding Filler is best joined / welded using products for high temperature situations and resistance to aqueous corrosion at moderate temperatures.
Sachiya Steel International offers a wide range of Inconel 601 Wire, which develops a tightly adherent oxide scale which resists spalling even under severe thermal cycling.Other applications of our Inconel 601 Wires include thermocouple protection tubes, condenser tubes, process heaters, and so on.This Inconel 601 Wire is best forged, for large deformations, between 2250 Degree F and 1900 Degree F, but forging may be continued to 1650 Degree F. Due to high chromium and some aluminum content in our Inconel 601 Coil Wire, good resistance in oxidizing sulfur bearing atmospheres at elevated temperatures is demonstrated.This Inconel 601 Electrode is often used in Chemical Processing, Heat treating industry, Aerospace, Power generation and so on.Our Inconel 601 Wire is a standard material of construction for various types of thermal – processing equipment.This Inconel 601 Wire has good creep rupture strength, along with readily joined by conventional welding products and processes.Our Alloy 601 Wire can be machined using conventional machining methods which are used for iron – based alloys.This Alloy 601 Coil Wire is not suggested for use in strongly reducing and sulfur bearing environments.
Sachiya Steel International offers a wide range of Inconel 600 Wire, which are normally preferred for handling concentrated and high temperature caustic.Its high nickel content, a minimum of Ni 72 %, combined with its chromium content, provides users of Inconel 600 Wire a number of benefits.In strong oxidizing solutions like hot, concentrated nitric acid, Inconel 600 Coil Wires has poor resistance.The high chromium content of Inconel 600 Wire raises its oxidation resistance considerably above that of pure nickel, while its high nickel content provides good corrosion resistance under reducing conditions.Inconel 600 Wire can both hot formed and cold form using typical processes, and is also often used in vegetable and fatty acid vessels.Inconel 600 Wires is also used for furnace components, in food and chemical processing, nuclear engineering, and sparking electrodes.Chromium content in Alloy 600 Coiled Wire confers resistance to sulfur compounds and also provides resistance to oxidizing conditions at high temperatures or in corrosive solutions.The high nickel content in Alloy 600 Coil Wire enables it to retain considerable resistance under reducing conditions.
Cupro Nickel 90 Wire Mesh has some of the attractive characteristics such as excellent resistance to uniform corrosion, remarkable resistance to localized corrosion in chlorinated seawater, and higher erosion resistance than other copper alloys and steel.This Cupro Nickel 90 / 10 Welding Wire Mesh still enjoy widespread use today not only for many navies but also in commercial shipping, floating production, storage and offloading vessels (FPSOs), and in multistage flash desalination.Our Copper Nickel 90 / 10 Netting Wire Mesh is excellent on hot and cold workability and is resistant towards atmospheric, brackish water, sea water and non – oxidizing acid corrosion.This Cupro Nickel 90 / 10 Woven Wire Mesh resists corrosion by fast moving water, which is as well highly resistant to SCC.Our Copper Nickel 90 / 10 Spring Steel Wire Mesh is a copper – nickel alloy with an alpha phase structure, where the cast structures have alpha dendrites that contain huge quantities of nickel content.These Cupro Nickel 90 / 10 Fencing Wire Mesh has undergone tests that indicate it has excellent antimicrobial properties.Our Cu-Ni 90 / 10 Wire Mesh is widely used in marine service, offshore platform sea water piping, tidewater power plants, desalination plants, oil refineries, and in the chemical process industry.Of all commercial copper alloys, these Copper Nickel 90 / 10 Wire Mesh offers the best resistance to aqueous corrosion.
Sachiya Steel International is a known manufacturer and exporter of Titanium Gr 2 Wire Mesh, which are unalloyed Commercially Pure (CP) Titanium.Our Titanium Grade 2 Hexagonal Wire Mesh is used based on the corrosion resistance, ductility and strength requirements of the specific application.Titanium Grade 2 Welding Wire Mesh is called the “workhorse” of the commercially pure titanium industry, thanks to its varied usability and wide availability.Although “commercially pure”, Titanium Grade 2 Spring Steel Wire Mesh has acceptable mechanical properties and has been used for orthopedic and dental implants.For most applications, Titanium Grade 2 Fencing Wire Mesh is alloyed with small amounts of aluminum and vanadium, typically 6 % and 4 % respectively, by weight.Ti Alloy Gr.2 Hexagonal Wire Mesh can easily be cold rolled, but cold drawing is very difficult because of frequent seizing on the die.
Sachiya Steel International is one of the well-known Manufacture and exporter of Super Duplex S32750 Wire Mesh, which can readily be used down to at least -50 Degree C. Super Duplex S32750 Hexagonal Wire Mesh is extremely corrosion resistant, work harden able alloys, where their microstructures consist of a mixture of austenite and ferrite phases.As a result, Super Duplex S32760 Welding Wire Mesh display properties characteristic of both austenitic and ferritic stainless steels.Combination of austenitic and ferritic properties in Super Duplex S32750 Netting Wire Mesh can mean some compromise when compared with pure austenitic and pure ferritic grades.Super Duplex S32760 Woven Wire Mesh is in most cases, tougher than ferritic stainless steels, where tooling and work surfaces must be thoroughly cleaned before use.Strengths of Super Duplex S32750 Spring Steel Wire Mesh can in some cases be double that for austenitic stainless steels.Whilst Super Duplex S32760 Fencing Wire Mesh is considered resistant to stress corrosion cracking, they are not as resistant to this form of attack as ferritic stainless steels.However, the corrosion resistance of the least resistant Super Duplex S32750 Wire Mesh is greater than that for the most commonly used grades of stainless steels, i.e.
Sachiya Steel International is one of the well-known Manufacture and Exporter of Duplex S32205 Wire Mesh , which has superior corrosion resistance compares to SS 304 and SS 316.The general use for our Duplex S31803 Hexagonal Wire Mesh is in the manufacture of chemicals such as sulphuric and phosphoric acids.General corrosion resistance of this Duplex S32205 Welding Wire Mesh is characterized by uniform attack on a flat surface in contact with a corrosive media.Pitting corrosion resistance increases in our Duplex S31803 Netting Wire Mesh with increasing chromium, molybdenum, and nitrogen contents.As such, this Duplex S32205 Woven Wire Mesh shows higher PREN (Pitting Resistance Equivalent Number) values than the typical austenitic grades.When exposed to standard medium of H2S sour gas for duration of 720 hours, our Duplex S31803 Spring Steel Wire Mesh has results that are comparable to a super – austenitic 904L.This Duplex S32205 Fencing Wire Mesh is chemically balanced to obtain a two phase ferrite and austenite structure containing between 40 % to 60 % ferrite.A typical structure of our Duplex S31803 Fencing Wire Mesh is shown when the material was hot rolled and solution annealed.
More

Top