sachiya steel

sachiya steel

Sachiya Steel International are manufacturers suppliers dealers exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.

Followers 1
Following 0
Sachiya Steel International offers a wide range of Hastelloy C276 Flanges, which has some excellent features to offer such as dimensional accuracy, durable finish standards, corrosion resistant and more.The low carbon content in these Hastelloy C276 Threaded Flanges (UNS N10276) minimizes carbide precipitation during welding to maintain corrosion resistance in as – welded structures.Hastelloy C276 Slip On Flanges can be cold worked by all conventional methods.These Hastelloy C276 Spectacle Blind Flanges withstands the corrosive effects of wet chlorine gas, hypochlorite and chlorine dioxide.Hastelloy C276 Weld Neck Flanges should be considered for use in environments where resistance to hot contaminated mineral acids, organic and inorganic chloride – contaminated media, chlorine, formic and acetic acids, acetic, acetic anhydride, sea water and brine solutions is desired.Meanwhile, these Hastelloy C276 Lap Joint Flanges are also being offered in customized sizes and shapes to our customers.Similar properties of Hastelloy C276 Ring Joint Type Flanges are found in silicon – chromium steels, in chromium steels of high nickel – content, in chromium – tungsten steels, and in the high – chromium steels, the last mentioned being called stainless steel.When liquid quenching is impractical (because of the danger of cracking or distortion, or because of cost), various low – carbon nickel or nickel – molybdenum steels such as these Hastelloy C276 Socket Weld Flanges in the normalized – and – tempered condition can be used for low – temperature service.
Sachiya Steel International offers a broad spectrum of Hastelloy C22 Flanges to the esteemed clients, which are manufactured by using pristine grade stainless steel.Hastelloy C22 Slip On Flanges (UNS N06022) is used in Chlorination systems, Nuclear fuel reprocessing, Pickling systems, and more.Hastelloy C22 Threaded Flanges has outstanding resistance to both reducing and oxidizing media and because of its resistibility can be used where “upset” conditions are likely to occur.Hastelloy C22 Spectacle Blind Flanges is also in a wide variety of hazardous waste management technologies where high corrosion – resistance of critical equipment is required for reliability, safety, and cost effectiveness / reduced maintenance.Meanwhile, these Hastelloy C22 Weld Neck Flanges are also being offered in customized sizes and shapes to our customers.We also offer these Hastelloy C22 Lap Joint Flanges at market leading rates.A common solution for assessing the resistance of Hastelloy C22 Socket Weld Flanges to this extremely destructive form of attack is boiling 45 % magnesium chloride, typically with stressed U-bend samples.Crevice tests of Hastelloy C22 Ring Joint Type Flanges were performed in both still (quiescent) and flowing seawater, at 29 Degree C, plus or minus 3 Degree C. As is evident from the following results, Hastelloy C22 Nippo Flanges are much more resistant to this form of attack than the comparative, austenitic stainless steels.
Sachiya Steel International is a known trading, exporting, supplying and manufacturing unit of Alloy Steel F91 Pipe Flanges, which is easy to clean and does not tend to pick up odours.Therefore, Alloy Steel F91 Slip On Flanges is approved for use in acid production and concentration, along with the transport of such substances.Most steels like Alloy Steel F91 Threaded Flanges are first melted in electric – arc or basic oxygen furnaces and subsequently refined in another steelmaking vessel, mainly to lower the carbon content.In the argon – oxygen decarburization process, a mixture of oxygen and argon gas is injected into the liquid alloy of Alloy Steel F91 Weld Neck Flanges.Because of its durability and aesthetic appeal, Alloy Steel F91 Socket Weld Flanges is used in a wide variety of products, ranging from eating utensils to bank vaults to kitchen sinks.While it is moderately resistant to chlorine, Alloy Steel F91 Blind Flanges generally should not be exposed to heat when sulphur is present due to its high percentage of nickel.Chlorine exposure in Alloy Steel F91 Lap Joint Flanges should also not exceed temperatures of 1000 Degree F. Alloy Steel F91 Ring Joint Type Flanges only responds to cold – working practices and its mechanical properties are applicable for many areas of use.
Sachiya Steel International is a known trading, supplying, exporting and manufacturing unit of Alloy Steel F22 Pipe Flanges, where there is certainly minimal use with hydrochloric acids.Alloy Steel F22 Slip On Flanges performs much better than other austenitic stainless steel steels because of the much higher alloying of nickel as well as molybdenum.Thus, cheaper raw materials in Alloy Steel F22 Threaded Flanges, such as high – carbon ferrochromium, may be used in the initial melting operation.Alloy Steel F22 Weld Neck Flanges typically contains 11.5 percent to 18 percent of chromium and up to 1.2 percent carbon with nickel sometimes added.Alloy Steel F22 Socket Weld Flanges are harden able by heat treatment, have modest corrosion resistance, and are employed in cutlery, surgical instruments, wrenches, and turbines.Alloy Steel F22 Blind Flanges is an alloy that displays high resistance to corrosion, particularly against acidic environments.Additions of copper and carbon give Alloy Steel F22 Lap Joint Flanges distinct characteristics, with the copper serving as a strengthening agent against corrosive acids.Alloy Steel F22 Pipe Flanges | Alloy Steel F22 Pipe Flanges | Alloy Steel F22 Pipe Flanges | Alloy Steel F22 Pipe FlangesThe small amount of carbon in its compositions gives Alloy Steel F22 Ring Joint Type Flanges increased weldability and cleanliness against continual wear and tear.
Sachiya Steel International is one of the pioneer suppliers, exporter and trader of Alloy A286 Angle, which is an iron – nickel – chromium alloy with additions of molybdenum and titanium.Alloy A286 Angle is designed for applications requiring high strength and good corrosion resistance at temperatures up to 704 Degree C. Alloy A286 C-Channel is age – harden able, iron – nickel – chromium super – alloy appropriate for applications that require high tensile strength, oxidation resistance and corrosion resistance.Alloy A286 Chain is a precipitation hardening, austenitic stainless steel designed for use at temperatures up to 1300 Degree F, where high tensile strength, excellent creep strength and good corrosion resistance are required.Alloy A286 I-Beam is an age – harden able iron base super – alloy for applications requiring high strength from -320 Degree F for up to 1000 Degree F long time, 1300 Degree F – 1500 Degree F short time.Alloy A286 H-Beam is an iron – based super – alloy useful for applications requiring high strength and corrosion resistance and for lower stress applications at higher temperatures.Alloy A286 Angle | Alloy A286 Angle | Alloy A286 Angle | Alloy A286 Angle | Alloy A286 Angle| Alloy A286 Angle | Alloy A286 Angle |Alloy A286 T-Beam has excellent fabrication characteristics and high mechanical properties due to age – hardenability.The limiting chemical composition is excellent, where A286 Alloy Angle is austenitic in all metallurgical conditions.A286 Alloy C-Channel is designed for applications requiring high strength and good corrosion resistance.
Sachiya Steel International offers a wide range of Duplex Steel S31803 Buttweld Fittings, which is manufactured at par with the international quality standards making use of high-grade steel.Duplex Steel S31803 Elbow Butt Weld Pipe Fittings is stainless steel is a stainless steel whose design enables combining improved resistance to pitting, high strength, stress corrosion, crevice corrosion and cracking.Duplex Steel S32205 Tee Butt Weld Pipe Fittings is often used in Chemical Process Industry: such as in Sulphuric Acid Production, Nitric Acid Processes, Phosphoric Acid Processes, Ethylene oxide, Polypropylene Production, PVC, Equipment Handling Organic and Fatty Acids, Chemical Storage and Tankers, Heat Exchangers, etc.Duplex Steel S31803 Reducer Pipe Fittings resists chloride environments and sulphide stress corrosion.Duplex Steel S31803 Buttweld Fittings | Duplex Steel S31803 Buttweld Fittings | Duplex Steel S31803 Buttweld Fittings| Duplex Steel S31803 Buttweld Fittings | Duplex Steel S31803 Buttweld Fittings | Duplex Steel S31803 Buttweld Fittings | Duplex Steel S31803 Buttweld FittingsMeanwhile, these Duplex Steel S32205 Cross Pipe Fittings are also being offered in different sizes and shapes to our customers.Duplex Steel S31803 Bend Butt Weld Pipe Fittings will often perform well in environments which cause premature failure of austenitic grades.Although Duplex Steel S32205 Stub End Butt Weld Pipe Fittings has good high temperature oxidation resistance, this grade – like other duplex stainless steels – suffers from embrittlement if held for even short times at temperatures above 300 Degree C. If embrittled, Duplex S31803 End Pipe Cap can only be rectified by a full solution annealing treatment.Duplex S32205 Dish Cap Pipe Fittings are almost never used above 300 Degree C. Duplex Steel S31803 / S32205 Pipe Fittings SpecificationsSpecifications:ASTM A815 / ASME SA815Size:Seamless Butt Weld Fittings: 1/2″ – 10″, Welded Butt Weld Fittings: 1/2″ – 48″Standards:ASME/ANSI B16.9, ASME B16.28, MSS-SP-43Thickness:5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75Type:Seamless / Welded / Fabricated
Sachiya Steel International is one of the pioneer dealer and whole seller of quality Nickel 201 Buttweld Fittings, which effectively resists water containing hydrogen sulphide or carbon dioxide.The resistance of Nickel 201 Elbow Butt Weld Pipe Fittings to corrosion by distilled and natural waters is excellent.In distilled water, the corrosion rate of Nickel 201 Tee Butt Weld Pipe Fittings has been found to be less.Corrosion rates of Nickel 201 Cross Butt Weld Pipe Fittings in domestic hot water up to 200 Degree F (95 Degree C) are normally less and only occasionally high.In distilled water saturated with 50 / 50 carbon dioxide and air at 160 Degree F (71 Degree C), the corrosion rate of Nickel 201 Reducer Butt Weld Pipe Fittings is less.Nickel 201 Buttweld Fittings | Nickel 201 Buttweld Fittings | Nickel 201 Buttweld Fittings | Nickel 201 Buttweld Fittings| Nickel 201 Buttweld Fittings | Nickel 201 Buttweld Fittings|Nickel 201 Bend Butt Weld Pipe Fittings is used for oil well strainers where corrosion by hydrogen sulphide and brine must be combatted.Nickel 201 Stub End gives excellent service in flowing sea water even at high velocity, but in stagnant or very low – velocity sea water severe local attack may occur under fouling organisms or other deposits.In steam – hot water systems where the steam contains carbon dioxide and air in certain proportions, corrosion rates of Nickel 201 End Pipe Cap will be initially high but will decrease with time if conditions favour the formation of a protective film.
Sachiya Steel International is a professional manufacturer and exporter of spectacle blind flanges with precision machining facilities.We produce spectacle blind flanges as per ANSI B16.5, DIN Standard and EN1092-1 in size range of 1/2” to 60” NPS.Spectacle Blinds are generally applied to permanently separating pipe systems or just to connect with each other.A Spectacle Blind is a steel plate cut into two discs of a certain thickness.The two discs are attached to each other by section of steel similar to the nose piece of a pair of glasses.We produce flanges in carbon steel, stainless steel, high nickel alloys, duplex/super duplex, copper nickel, titanium and special alloys.Spectacle Blind Flanges Available for Sale in Sizes 1/2″ to 60″ (DN15~DN1500)Pressure Rating: 150, 300, 400, 600, 900, 1500, 2500 ClassFlanges Manufactured in Various Standards & Specifications including ANSI / ASME Flanges, BS Flanges, DIN Flanges, EN 1092-1 Flange, JIS FlangeCertification as per EN 10204 3.1Types of Flanges: Weld Neck Flange, Threaded / Screwed Flange, Spectacle Blind Flange, Slip on Flange, Socket Weld Flange, Lap Joint Flange, Blind FlangeProductSpectacle Blind FlangesClass150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS DIN Standard ND-6,10, 16, 25, 40 etc.CertificateEN 10204 3.1Size1/2″ to 60″ mmBrandSachiya Steel IntenationalPackingBundled Packing, LooseFormStainless Steel Spectacle Blind Flanges, Carbon Steel Spectacle Blind Flanges, Mild Steel Spectacle Blind FlangesApplicationsPower Generation, Petrochemicals, Chemical Equipment, Sea Water Equipment, Off-Shore Oil Drilling Companies, Pulp and Paper Industry MaterialsMonel :Grade: Monel 400, Monel K500, Monel R-405Nickel :Grade: Nickel 200, Nickel 201Inconel :Grade: Inconel 600, Inconel 601, Inconel 625, Inconel 718Incoloy :Grade: Incoloy 800, Inconel 800H, 800HTHastalloy :Grade: Hastalloy B2, Hastalloy B3, Hastalloy C22, Hastalloy C276, Hastalloy XTitanium :Grade: Gr1, Gr2, Gr3, Gr5, Gr7, Gr11Stainless Steel :Grade: ASTM A182 F202, F304/304L/304H, F316/316L, F316H, F316TI, F310, F321, F904LCarbon Steel :Grade: ASTM A105/A105N, A350 LF1, LF2 CL1/CL2, LF3 CL1/CL2, A694 F42, F46, F48, F50, F52, F56, F60, F65, F70, A516.60, 65, 70 (Spectacle Blind Flange, Spacer Ring/Spade Flange), Steel RST37.2, C22.8Duplex Steel:Grade: ASTM / ASME A/SA 182 UNS F44, F45, F51, F53, F55, F60, F61Alloy Steel:Grade : ASTM A182 F1, F5, F9, F11, F22, F91 Production Supply & Manufacturing Range for Spectacle Blind FlangesStandard:ASTM A182, ASTM A240, ANSI/ASME B16.5, B16.47, B16.48Certificate:EN 10204 3.1Size:1/2″ to 60″, DN 15 to DN 1500Surface Treatment:Anti-Rust Oil, Painting ( Black, Yellow), Galvanizing, Power CoatingTesting Material :Mechanical Testing Such as Tensile of Area, Hardness Test, Positive Material Identification – PMI Testing, Flattening Test, Micro and Macro Test, Pitting Resistance Test, Flaring Test, Intergranular Corrosion (IGC) TestPackage:Plywood Pallet, Wooden Pallet, Wooden Case etc.Usage:Used for the connection of all kinds of piping systems to convey the water, steam, air, gas and oilPressure:ANSI : Class 150, 300, 600, 900, 1500, 2500 lbsDIN : PN6, PN10, PN16, PN25, PN40GOST : PN6, PN10, PN16, PN25, PN40, PN63, PN100EN1092-1 : PN6, PN10, PN16, PN25, PN40, PN63, PN100JIS : 5K, 10K, 16K, 20K, 30K, 40KBS4506 : PN6, PN10, PN16, PN25, PN40
Sachiya Steel International is one of the pioneer manufacturer and trader of AISI 4130 Steel Angle, Channel, Beam, Chain, which has excellent quality that the possibility of designing thinner walls can save cost.Often referred to as an excellent grade due to the molybdenum content, AISI 4130 Steel Angle has the ability to withstand high temperatures and maintain strength under volatile conditions.Commonly used as a replacement in critical components of larger constructions where SS 316L or SS 317L has failed by pitting or chloride stress corrosion cracking, AISI 4130 C-Channel withstands the same corrosive environments.In new construction, AISI 4130 Chain has been found in many cases to be a technically adequate and more cost efficient substitute for other nickel based alloys and titanium, where the allowable design values may be about 50 % higher than those for standard austenitic steels.AISI 4130 I-Beam is often considered a “high end” austenitic stainless, which is further readily fabricated and welded.AISI 4130 Steel Angle | AISI 4130 Steel Angle | AISI 4130 Steel Angle | AISI 4130 Steel Angle | AISI 4130 Steel Angle | AISI 4130 Steel Angle |AISI 4130 Steel AngleAISI 4130 H-Beam offers chloride resistance superior to that of other alloys and is especially suited for high chloride environments such as brackish water or seawater.AISI 4130 T-Beam is an austenitic stainless steel, compatible with the common austenitic stainless steels, designed with high levels of chromium, molybdenum, and nitrogen for maximum resistance to pitting and crevice corrosion.Offered to client’s at the most reasonable rate possible, the offered range of AISI 4130 Steel Angle is known to have a high preference in the market.
Sachiya Steel International is one of the pioneer suppliers and trader of SMO 254 Angle, which is available in different sizes, designs and shapes in customized options for our clients.SMO 254 Angle has been shown that nickel has very little statistically detectable effect on pitting corrosion resistance over the full range of austenitic stainless steels.When SMO 254 C-Channel is not satisfactory for use in a particular application due to susceptibility to SCC, then selection of the other alloys for that application would be an exceedingly risky proposition.Support for the similar performance comes from the very similar Pitting Resistance Equivalent number for SMO 254 Chain.The Pitting Resistance Equivalent number employs statistical regression in SMO 254 H-Beam to relate pitting resistance to the chemical composition of a stainless steel.The Pitting Resistance Equivalent number calculations from various investigators have demonstrated that the pitting resistance of SMO 254 I-Beam depends primarily on the level of Cr, Mo, and N content.SMO 254 Angle | SMO 254 Angle | SMO 254 Angle | SMO 254 Angle | SMO 254 Angle | SMO 254 Angle | SMO 254 Angle | SMO 254 Angle | SMO 254 AngleThe sensitivity of the Pitting Resistance Equivalent number data is such that within grade variations of Cr, Mo, and N near the nominal values for SMO 254 T-Beam.The apparent Pitting Resistance Equivalent number variation of Alloy 254 Angle is of minor import compared to effects from surface finish, normal variations in practical annealing conditions, and variations in the corrosiveness of the environment.
Sachiya Steel International is a known trading, supplying, exporting and manufacturing unit of Alloy Steel F22 Pipe Flanges, where there is certainly minimal use with hydrochloric acids.Alloy Steel F22 Slip On Flanges performs much better than other austenitic stainless steel steels because of the much higher alloying of nickel as well as molybdenum.Thus, cheaper raw materials in Alloy Steel F22 Threaded Flanges, such as high – carbon ferrochromium, may be used in the initial melting operation.Alloy Steel F22 Weld Neck Flanges typically contains 11.5 percent to 18 percent of chromium and up to 1.2 percent carbon with nickel sometimes added.Alloy Steel F22 Socket Weld Flanges are harden able by heat treatment, have modest corrosion resistance, and are employed in cutlery, surgical instruments, wrenches, and turbines.Alloy Steel F22 Blind Flanges is an alloy that displays high resistance to corrosion, particularly against acidic environments.Additions of copper and carbon give Alloy Steel F22 Lap Joint Flanges distinct characteristics, with the copper serving as a strengthening agent against corrosive acids.The small amount of carbon in its compositions gives Alloy Steel F22 Ring Joint Type Flanges increased weldability and cleanliness against continual wear and tear.
Sachiya Steel International is a known supplying, trading, exporting and manufacturing unit of Alloy Steel F12 Flanges, where its maximum service temperature is at 450 Degree C. This distortion – free (non – warping) characteristic of Alloy Steel F12 Slip On Flanges is a significant advantage over many other high – strength steels.However, there is restricted use of Alloy Steel F12 Threaded Flange with hydrochloric acids.Alloy Steel F12 Blind Flange also possesses a great resistance to pitting in chloride solutions, a great resistance to crevice and stress corrosion cracking.There is absolutely no risk of inter – crystalline corrosion on cooling or welding in Alloy Steel F12 Socket Weld Flanges due to the low carbon content.These continuous – annealing furnaces in Alloy Steel F12 Weld Neck Flanges are usually heated by gas – fired radiation tubes in order to separate combustion gases from the inert atmosphere surrounding the stripScale consists of thin layers of iron oxide crystals in Alloy Steel F12 Lap Joint Flanges, of which the chemical compositions, structures, and densities vary according to the temperature, oxidizing conditions, and steel properties that are present during their formation.Alloy Steel F12 Ring Joint Type Flanges also provides an excellent protection to pitting in chloride solutions, an excellent resistance to both crevice and then stress corrosion cracking.Therefore, Alloy Steel F12 Spectacle Blind Flanges is classified as a super alloy / high performance alloy.Alloy Steel F12 Pipe Flange SpecificationsSpecifications:ASTM A182 / ASME SA182Size:1/2″ (15 NB) to 48″ (1200NB)Standards:ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.Class / Pressure:150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.Standard:ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.
Sachiya Steel International is one of the known exporter and trader for Stainless Steel 329 Angle, which offers good resistance to other inorganic acids such as hot phosphoric acid as well as most organic acids.The addition of copper to Stainless Steel 329 Angle gives it corrosion resistant properties superior to the conventional chrome nickel stainless steels, in particular to sulphuric, phosphoric and acetic acids.The austenitic structure also gives Stainless Steel 329 C-Channel excellent toughness, even down to cryogenic temperatures.The high strength and corrosion resistance of our Stainless Steel 329 H-Beam make it a better choice than the conventional stainless steels and a cost effective alternative to more expensive nickel – base alloys where excellent formability, weldability, strength and corrosion resistance are essential.Stainless Steel 329 Angle | Stainless Steel 329 Angle | Stainless Steel 329 Angle | Stainless Steel 329 Angle | Stainless Steel 329 Angle | Stainless Steel 329 Angle Because of its nitrogen content, Stainless Steel 329 I-Beam has greater tensile strength than common austenitic stainless, while retaining high ductility and impact strength.The ASME allowable stresses for our Stainless Steel 329 T-Beam are up to 75 % higher than for 316L stainless, and more than twice those for the copper – nickel alloys.329 Stainless Steel Angle is a widely used high – temperature bearing structural member of austenitic heat resistant alloy of high strength.Our 329 Stainless Steel Chain is mainly due to the addition of carbon, aluminum, titanium, and annealed at a minimum temperature of 1149 Degree C in order to achieve the grain size or more grades of crude.SS 329 Angle, Channel, Beam, Chain SpecificationsSpecifications:ASTM A 276/A 276M,A 484/A 484M,A 564/A 564M,A 582/A582M,A 638 /A 638M,A705/A705MDimensions:EN, DIN, JIS, ASTM, BS, ASME, AISISS 329 Angle:5mm to 9mmSS 329 Channel:40mm*20mm~300mm*300mmSS 329 Beam:3″ thru 12.31″SS 329 Chain:1/8 inch – 1/2 inch DiameterThickness:3.0mm – 120mmLength:3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut SizesType:Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain 329 Stainless Steel Angle, Channel, Beam, Chain Chemical CompositionGradeCMnSiPSCrMoNiNSS 3290.08 max1 max0.75 max0.040 max0.030 max23 – 281.0-2.02.5-5.0–Stainless Steel 329 Angle, Channel, Beam, Chain Mechanical PropertiesDensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation0.285 lb/in3–MPA-725MPA-55025 %Equivalent Grades for 329 Stainless Steel Angle, Channel, Beam, ChainSTANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENSS 3291.4460S32900SUS 329329S31––– 
More

Top