Sachiya Steel International is one of the leading manufacturer and exporter of Inconel Alloy 625 Tube to Male Fittings, which provides excellent corrosion resistance in a wide variety of severe corrosive environments due to its high alloy content. These Inconel 625 Tube Fittings in the soft annealed condition are characterized by immunity to chloride – induced stress corrosion cracking. Because the alloy is developed to retain high strength at elevated temperatures, our Inconel 625 Compression Fittings resists deformation at hot-working temperatures and higher loads are required to cause the material to deform.
Product and technology applications of these Inconel 625 Male Connector Fittings include: Chemical process equipment, Engine thrust – reverser systems, Specialized seawater equipment, Turbine shroud rings, and Jet engine exhausts systems. Its high strength enables our Inconel 625 Ferrule Fittings to be used, for example, in thinner – walled vessels or tubing than possible by means of other materials, thus improving heat transfer and saving weight. These Inconel 625 Double Ferrule Fittings is resistant to inter – granular corrosion even in the welded condition, where pitting and crevice corrosion are prevented by molybdenum.
Inconel Alloy 625 Tube to Male Fittings | Inconel Alloy 625 Tube to Male Fittings | Inconel Alloy 625 Tube to Male Fittings | Inconel Alloy 625 Tube to Male Fittings | Inconel Alloy 625 Tube to Male Fittings | Inconel Alloy 625 Tube to Male Fittings | Inconel Alloy 625 Tube to Male Fittings | Inconel Alloy 625 Tube to Male Fittings
Our Inconel 625 Compression Tube Fittings is often used for Aerospace Components, such as in bellows and expansion joints, jet engine exhaust systems, ducting systems, engine thrust – reversers and turbine shroud rings. These Alloy 625 Tube Fittings is as well used in components where exposure to sea water and high mechanical stresses are required.
Inconel 625 Tube to Male Fittings Specifications |
||
| Specifications | : | ASTM B366 ASME SB366 |
| Tube Size | : | 6mm to 38mm to 1/4″ to 1 1/2″ |
| Thread |
: | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
| Brass | : | ASTM B16 ASTM B 453 |
| Pressure Rating | : | 6000PSI for Inconel, 300/1000/3000PSI for Brass |
Inconel Alloy 625 Tube To Male Fittings Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
| Inconel 625 | 0.10 max | 0.50 max | 0.50 max | 0.015max | – | 5.0 max | 58.0 min | 20.0 – 23.0 |
Inconel 625 Tube To Male Fittings Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Inconel 625 | 8.4 g/cm3 | 1350 °C (2460 °F) | Psi – 1,35,000 , MPa – 930 | Psi – 75,000 , MPa – 517 | 42.5 % |
Equivalent Grades for 625 Inconel Ferrule Fitting Tube To Male Fittings
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Inconel 625 | 2.4856 | N06625 | NCF 625 | NA 21 | ХН75МБТЮ | NC22DNB4MNiCr22Mo9Nb | NiCr23Fe |
Alloy 625 Tube To Male Fittings Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
About Us:
Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.
Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide. We export our high-quality fasteners in Saudi Arabia, Oman, UAE, Dubai, Kuwait, Qatar, Mexico, USA, Malaysia, Iran and many other countries.
Email: [email protected]
For More Information Visit Our Website : Sachiya Sheet Plates
Sachiya Steel International offers a wide range of Inconel Alloy 625 Tube to Female Pipes, which has good strength / ductility properties from sub – zero temperatures to over 980 Degree C. Inconel 625 Tube Fittings in the soft annealed condition are characterized by good resistance to mineral acids such as nitric, phosphoric, hydrochloric and sulfuric acid.
Inconel 625 Compression Fittings has excellent forming and welding characteristics, where hot forming should be performed within a temperature range of 1700 Degree F to 2150 Degree F.Some applications requiring the combination of strength and corrosion resistance offered by Inconel 625 Female Connector Fittings are bubble caps, reaction vessels, tubing, distillation columns, transfer piping, valves and heat exchangers.
Inconel 625 Ferrule Fittings is produced by vacuum induction melting or by AOD refining, where niobium stabilizes the alloy contrary to sensitization in the course of welding.
Inconel 625 Double Ferrule Fittings is often used for Air Pollution Control, such as in chimney liners, flue gas desulfurization (FGD) components, dampers, etc.
Inconel 625 Compression Tube Fittings is also used in oil and gas production where hydrogen sulfide and elementary sulfur exist at temperature in excess of 150 Degree C.Inconel Alloy 625 Tube to Female Pipes | Inconel Alloy 625 Tube to Female Pipes | Inconel Alloy 625 Tube to Female Pipes | Inconel Alloy 625 Tube to Female Pipes | Inconel Alloy 625 Tube to Female Pipes | Inconel Alloy 625 Tube to Female Pipes | Inconel Alloy 625 Tube to Female Pipes | Inconel Alloy 625 Tube to Female PipesInconel 625 Tube Fittings is a nickel – chromium alloy used for its high strength, outstanding corrosion resistance and excellent fabricability.
Alloy 625 Compression Fittings is not only nickel based super alloy, but also Non – Magnetic and Corrosion resistant in nature.Inconel 625 Tube to Female Pipes SpecificationsSpecifications:ASTM B366 ASME SB 366Size:OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Pressure Rating:3000 – 6250 PSIApplicable Temperature:150-400 CType:Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting.
Sachiya Steel International is one of the leading manufacturer and exporter of Inconel 625 Tube to Male Fittings, which provides excellent corrosion resistance in a wide variety of severe corrosive environments due to its high alloy content.
These Inconel 625 Tube Fittings in the soft annealed condition are characterized by immunity to chloride – induced stress corrosion cracking.
Because the alloy is developed to retain high strength at elevated temperatures, our Inconel 625 Compression Fittings resists deformation at hot-working temperatures and higher loads are required to cause the material to deform.Product and technology applications of these Inconel 625 Male Connector Fittings include: Chemical process equipment, Engine thrust – reverser systems, Specialized seawater equipment, Turbine shroud rings, and Jet engine exhausts systems.
Its high strength enables our Inconel 625 Ferrule Fittings to be used, for example, in thinner – walled vessels or tubing than possible by means of other materials, thus improving heat transfer and saving weight.These Inconel 625 Double Ferrule Fittings is resistant to inter – granular corrosion even in the welded condition, where pitting and crevice corrosion are prevented by molybdenum.
Our Inconel 625 Compression Tube Fittings is often used for Aerospace Components, such as in bellows and expansion joints, jet engine exhaust systems, ducting systems, engine thrust – reversers and turbine shroud rings.
These Alloy 625 Tube Fittings is as well used in components where exposure to sea water and high mechanical stresses are required.Inconel 625 Tube to Male Fittings SpecificationsSpecifications:ASTM B366 ASME SB366Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Inconel, 300/1000/3000PSI for Brass Inconel Alloy 625 Tube To Male Fittings Chemical Composition GradeCMnSiSCuFeNiCrInconel 6250.10 max0.50 max0.50 max0.015max–5.0 max58.0 min20.0 – 23.0 Inconel 625 Tube To Male Fittings Mechanical PropertiesElementDensityMelting PointTensile StrengthYield Strength (0.2%Offset)ElongationInconel 6258.4 g/cm31350 °C (2460 °F)Psi – 1,35,000 , MPa – 930Psi – 75,000 , MPa – 51742.5 % Equivalent Grades for 625 Inconel Ferrule Fitting Tube To Male FittingsSTANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENInconel 6252.4856N06625NCF 625NA 21ХН75МБТЮNC22DNB4MNiCr22Mo9NbNiCr23Fe Alloy 625 Tube To Male Fittings Application Industries Off-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
Sachiya Steel International is leading manufacturer and exporter of Inconel 625 Tube to Union Fittings, which is equipped with sophisticated techniques and machines.
Inconel 625 Tube Fittings has excellent weldability, excellent fatigue strength and stress – corrosion cracking resistance to chloride ions.
The outstanding strength and toughness of Inconel 625 Ferrule Fittings in the temperature range cryogenic to 2000 Degree F (1093 Degree C) are derived primarily from the solid solution effects of the refractory metals, columbium and molybdenum, in a nickel – chromium matrix.
Inconel 625 Double Ferrule Fittings, which is one of the most corrosion – resistant steels in the world, also demonstrates remarkable protection against corrosion and oxidation.Inconel 625 Compression Tube Fittings are often used in pollution -control equipment, and nuclear reactors.
Meanwhile, these Alloy 625 Tube Fittings are also being offered in different sizes and shapes to our customers.
In the annealed condition, Alloy 625 Ferrule Fittings is fully austenitic and is suitable for machining, and can be formed using various cold and hot working processes.Inconel 625 Tube to Union Fittings | Inconel 625 Tube to Union Fittings | Inconel 625 Tube to Union Fittings | Inconel 625 Tube to Union Fittings | Inconel 625 Tube to Union Fittings | Inconel 625 Tube to Union Fittings | Inconel 625 Tube to Union Fittings | Inconel 625 Tube to Union Fittings | Inconel 625 Tube to Union FittingsAlloy 625 Double Ferrule Fittings in the soft annealed condition is characterized by exceptional resistance to pitting, crevice corrosion, erosion, and inter – granular corrosion.
Sachiya Steel International is one of the leading manufacturer and exporter of Inconel Alloy 718 Tube to Male Fittings, which is relatively suggested amongst the customers for their trouble free performance.
Composition of our Inconel 718 Tube Fittings offers a soaring level of corrosion resistance and potency, which can be age – hardened by the addition of titanium and aluminum.
These Inconel 718 Compression Fittings offers excellent strength for up to 538 Deg C, which is a precipitation – harden able iron- nickel-chromium alloy by means of accompaniments of copper and molybdenum.Our Inconel 718 Male Connector Fittings combines the soaring potency of a precipitation – harden able alloy by means of the outstanding corrosion resistance of INCOLOY alloy 718 Tube Fittings.
Meanwhile, these Inconel 718 Compression Tube Fittings (UNS N07718) are also being offered in different sizes and shapes to our customers.
Our Inconel 718 Ferrule Tube Fittings also finds several applications in rocket engines and cryogenic environments due to its good toughness at low temperature (preserving parts from a brittle fracture).Inconel Alloy 718 Tube to Male Fittings | Inconel Alloy 718 Tube to Male Fittings | Inconel Alloy 718 Tube to Male Fittings | Inconel Alloy 718 Tube to Male Fittings | Inconel Alloy 718 Tube to Male Fittings | Inconel Alloy 718 Tube to Male Fittings | Inconel Alloy 718 Tube to Male Fittings | Inconel Alloy 718 Tube to Male Fittings | Inconel Alloy 718 Tube to Male FittingsThese Inconel 718 Double Ferrule Tube Fittings has high temperature resistant, which is then fabricated in its most malleable condition.
Our Alloy 718 Tube Fittings is hardened by the precipitation of secondary nickel – (aluminum, titanium, and niobium) phases giving the alloy a combination of high strength and good corrosion resistance.
