The basic steps of the design of the plastic capping machine 1. When we get the product, the first step is to carefully analyze the mold and check the structure of the mold. After doing this, you should also find some factors that can affect the design of the plastic mold, such as the model of the compression molding machine, the pattern mode of the compression molding machine, some problems after the analysis of the product, etc., all need to communicate with the customer, Achieve the best plastic mold design results. 2. Determine what structure the product will adopt, determine the process flow for the mold making, and the specific operating steps. Design specific software. 3. According to the previous step, prepare the product and determine the mold size in the sample. It is best to prepare the material directly on the unfolded view of the sample, which saves working time. 4. Start drawing the mold design. Each part of the mold must be carefully drawn to reflect the data, especially the size, which is convenient for subsequent work. 5. After drawing the mold drawings, proofreading should be carried out, and the drawings of each accessory should be effectively analyzed to ensure that no errors occur when the production is put into production.
Attention to the use of the compression molding machine When we are processing plastic molds, there are many places worth paying attention to, because some plastic molds are not carefully processed, resulting in short or even unusable molds, which will give us Has serious consequences. Other external factors that are caused by the environment, etc., will also become a drawback that restricts the use of molds. For example, when we are processing plastic molds, because the edges are too sharp, the pressure-reducing ability is greatly reduced, and the established standards are not met. Therefore, the test can not be passed, which affects the time of delivery, possibly because of this. For the sake of this, our customers are lost, which will cause great losses to the company. In addition, when we are processing plastic molds, the temperature must be accurate, because the temperature can affect the molding time of the mold and the moldability and plasticity of the mold. Good molds and temperature control will be very accurate. Extend the life of the mold.
