Sachiya Steel International offers a widespread collection of Incoloy 825 Plate and Coils, which are made by using best quality of material. Heavy duty machining machinery and tooling must be used in these Incoloy 825 Slating Coils to minimalize chatter or work – toughening of the alloy ahead of the cutting. The levels of copper and molybdenum enable our Incoloy 825 Perforated Coils to resist reducing acids and agents.
Chemical configuration of these Alloy 825 Plates offer great resistance to several corrosive atmospheres, such as crevice corrosion, pitting, stress – corrosion cracking and inter – granular corrosion. Alloy 825 Coils is used in good temperatures for about 1020 Degree F. Meanwhile, Alloy 825 Slatting Coils are also being offered in different sizes and shapes to our customers.
Incoloy 825 Plate | Incoloy 825 Plate | Incoloy 825 Plate | Incoloy 825 Plate | Incoloy 825 Plate | Incoloy 825 Plate | Incoloy 825 Plate
These Alloy 825 Perforated Coils has good mechanical properties from moderate to high temperatures, where conventional machining techniques used for iron based alloys may be used. Incoloy UNS N08825 Sheets is especially resistant to sulfuric and phosphoric acids, which further has good mechanical performance in both room temperature and up to 550 Degree C.
These Incoloy 825 Sheets is stabilized annealed at the mill to resist inter – granular corrosion as – welded, where tooling should be such as to allow for liberal clearances and radii. The outstanding property of Nickel-Alloy 825 Coils is its corrosion resistance. We also offer these Nickel-Alloy 825 Plates in best possible prices.
Incoloy 825 Sheet, Plate & Coil Specifications |
||
| Specifications | : | ASTM / ASME SB 424 |
| Size | : | 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm |
| Thickness | : | 0.1mm to 12 mm Thk |
| Form | : | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange) |
| Finish | : | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Hardness | : | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
Incoloy 825 Plate, Sheet & Coil Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr | Al | Ti |
| 825 | 0.05 max | 1.00 max | 0.5 max | 0.03 max | 1.50 – 3.00 | 22.00 min | 38.00 – 46.00 | 19.50 – 23.50 | 0.02 max | 0.06 – 1.20 |
Alloy 825 Sheets, Plates & Coils Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 825 | 8.14 g/cm3 | 1400 °C (2550 °F) | Psi – 80,000 , MPa – 550 | Psi – 32,000 , MPa – 220 | 30 % |
Equivalent Grades for 825 Incoloy Sheets & Plates
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN | OR |
| Incoloy 825 | 2.4858 | N08825 | NCF 825 | NA 16 | ЭП703 | NFE30C20DUM | NiCr21Mo | XH38BT |
Sachiya Steel International offers a wide range of Incoloy Alloy 825 Tube to Female Pipes, where most of any commercial coolant may be used in the machining operations.
Incoloy 825 Tube Fittings has many different industrial applications, some of which include: Phosphoric acid evaporators, Propeller shafts, Tank trucks, and more.
Incoloy 825 Compression Fittings is an all – purpose project alloy, have good corrosion resistance of the acid and alkali metal property in both oxidation and reduction environments.Incoloy 825 Compression Tube Fittings has excellent resistance to sulfuric and phosphoric acids and resists inter – granular corrosion in the as – welded condition.
The commonly used welding methods work well with Incoloy 825 Female Connector Fittings, where matching alloy filler metal should be used.
Incoloy 825 Ferrule Fittings should not be used at temperatures where creep – rupture properties are design factors.
Incoloy 825 Double Ferrule Fittings is particularly useful in sulfuric & phosphoric acids, sulfur containing flue gases, sour gas, oil wells and sea water.Incoloy Alloy 825 Tube to Female Pipes | Incoloy Alloy 825 Tube to Female Pipes | Incoloy Alloy 825 Tube to Female Pipes | Incoloy Alloy 825 Tube to Female Pipes | Incoloy Alloy 825 Tube to Female Pipes | Incoloy Alloy 825 Tube to Female Pipes | Incoloy Alloy 825 Tube to Female Pipes | Incoloy Alloy 825 Tube to Female Pipes |Incoloy Alloy 825 Tube to Female Pipes | Incoloy Alloy 825 Tube to Female Pipes | Incoloy Alloy 825 Tube to Female PipesAlloy 825 Tube Fittings is developed to provide exceptional resistance to numerous corrosive environments, both oxidizing and reducing.
Sachiya Steel International offers a wide range of Incoloy 825 Angle And Other Incoloy Products, which are often used in Chemical process vessels and Catalytic cracking units.
The nickel content in our Incoloy 825 Angle provides resistance to chloride – ion stress corrosion cracking, where carbide tools are recommended for turning with a continuous cut.
A variety of media corrosion of nuclear – burning dissolver show this Incoloy 825 C-Channel high integrated property, such as sulfuric acid, potassium hydroxide and nitric acid are all dealing in a same device.Our Incoloy 825 H-Beam is not necessary to preheat, but surfaces to be welded must be clean from paint, oil or crayon markings and any residual lubricants used in the forming process.
For maximum corrosion resistance in this Incoloy 825 I-Beam, hot worked parts should be stabilizing annealed before use.
The chromium and molybdenum content of our Incoloy 825 T-Beam provides resistance to chloride pitting, as well as resistance to a variety of oxidizing atmospheres.
This Incoloy 825 Chain has good mechanical properties from cryogenic temperatures to moderately high temperatures.Incoloy 825 Angle | Incoloy 825 Angle | Incoloy 825 Angle | Incoloy 825 Angle | Incoloy 825 Angle | Incoloy 825 Angle The following properties are applicable to our Alloy 825 Angle at room and elevated temperatures in the annealed respectively stabilized temper and indicated size ranges.
Sachiya Steel International offers a wide range of Incoloy 825 Angle, which are often used in Chemical process vessels and Catalytic cracking units.
The nickel content in our Incoloy 825 Angle provides resistance to chloride – ion stress corrosion cracking, where carbide tools are recommended for turning with a continuous cut.
A variety of media corrosion of nuclear – burning dissolver show this Incoloy 825 C-Channel high integrated property, such as sulfuric acid, potassium hydroxide and nitric acid are all dealing in a same device.Our Incoloy 825 H-Beam is not necessary to preheat, but surfaces to be welded must be clean from paint, oil or crayon markings and any residual lubricants used in the forming process.
For maximum corrosion resistance in this Incoloy 825 I-Beam, hot worked parts should be stabilizing annealed before use.
The chromium and molybdenum content of our Incoloy 825 T-Beam provides resistance to chloride pitting, as well as resistance to a variety of oxidizing atmospheres.Incoloy 825 Angle | Incoloy 825 Angle | Incoloy 825 Angle | Incoloy 825 Angle | Incoloy 825 AngleThis Incoloy 825 Chain has good mechanical properties from cryogenic temperatures to moderately high temperatures.
The following properties are applicable to our Alloy 825 Angle at room and elevated temperatures in the annealed respectively stabilized temper and indicated size ranges.
Sachiya Steel International offers an extensive collection of Incoloy 825 Wire Mesh, which has good anti – oxidation and non – oxidizing heat acid performance.
Incoloy 825 Hexagonal Wire Mesh is an Austenitic Nickel – Iron – Chromium Alloy Developed for Exceptional Corrosion Resistance in Both Oxidizing and Reducing Environments.
Alloy 825 Welding Wire Mesh is used in chemical process equipment, acid production piping and vessels, pickling, etc.
Incoloy 825 Netting Wire Mesh is a nickel – iron – chromium alloy with titanium, molybdenum and copper, which has good mechanical properties from cryogenic temperatures to moderately high temperatures.Incoloy 825 Woven Wire Mesh has excellent resistance to both reducing and oxidizing acids, to stress – corrosion cracking, and to localized attack such as pitting and crevice corrosion.
Incoloy 825 Spring Steel Wire Mesh has useful resistance to boiling sulfuric acid up to 40 % concentration, to 60 % concentration at 176 Degree F and in all concentrations to 150 Degree F. Incoloy 825 Fencing Wire Mesh is even used as clad steel pipe – where resistance to stress cracking or general corrosion to a range of reducing or oxidizing acids is required.For long production runs if Alloy 825 Wires, the alloy tool steels, and high – speed steels give good results, especially if hard chromium plated to reduce galling.
Alloy 825 Hexagonal Wire Mesh is also used in ammonium sulfate vessels, marine exhaust systems, expansion bellows, power station ash hoppers, etc.
