Sachiya Steel International is one of the well-known manufacturer and exporter of Super Duplex S32750 Channel Other Products, which has better resistance to sea water then Grade 316. The standard composition of Super Duplex S32750 Angle has over the years been refined by us, and the resulting restricted composition range was endorsed. Super Duplex S32760 Angle is not generally suitable for use at temperatures above 300 Degree C as it suffers from precipitation of brittle micro constituents, or below -50 Degree C because of its ductile – to – brittle – transition.
Super Duplex S32750 Chain has excellent general corrosion resistance, and also superior to Grade 316 in most environments. Super Duplex S32760 Chain has excellent resistance to localized corrosion including inter – granular, pitting and crevice corrosion, where the CPT is generally at least 35 Degree C.
Super Duplex S32750 Channel | Super Duplex S32750 Channel | Super Duplex S32750 Channel | Super Duplex S32750 Channel | Super Duplex S32750 Channel | Super Duplex S32750 Channel | Super Duplex S32750 Channel | Super Duplex S32750 Channel | Super Duplex S32750 Channel
Super Duplex S32750 C-Channel is also resistant to chloride stress corrosion cracking (SCC) at temperatures of up to about 150 Degree C. Super Duplex S32760 C-Channel will often perform well in environments which cause premature failure of austenitic grades. Super Duplex S32750 I-Beam is versatile, general purpose stainless steels with good resistance to atmospheric corrosion, to a lot of organic and inorganic chemicals, and to foods and beverages. Super Duplex S32750 H-Beam has also been used in vacuum processing equipment and specialized instruments where high integrity is essential. For optimum corrosion resistance, forged parts of Super Duplex S32750 T-Beam should be subsequently annealed.
Super Duplex S32750/S32760 Angle, Channel, Beam, Chain Specifications |
||
| Specifications | : | ASTM A276/ASME SA276 |
| Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Super Duplex S32750/S32760 Angle |
: | 5mm to 9mm |
| Super Duplex S32750/S32760 Channel |
: | 40mm*20mm~300mm*300mm |
| Super Duplex S32750/S32760 Beam | : | 3″ thru 12.31″ |
| Super Duplex S32750/S32760 Chain |
: | 1/8 inch – 1/2 inch Diameter |
| Thickness |
: | 3.0mm – 120mm |
| Length | : | 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes |
| Type | : | Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain |
S32750/S32760 Super Duplex Angle, Channel, Beam, Chain Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | Fe |
| S32750 | 0.030 max | 1.20 max | 0.80 max | 0.035 max | 0.020 max | 24.00 – 26.00 | 3.00 – 5.00 | 6.00 – 8.00 | 0.24 – 0.32 | 58.095 min |
| S32760 | 0.05 max | 1.00 max | 1.00 max | 0.030 max | 0.010 max | 24.00 – 26.00 | 3.00 – 4.00 | 6.00 – 8.00 | 0.20 – 0.30 | 57.61 min |
Super Duplex S32750/S32760 Angle, Channel, Beam, Chain Mechanical Properties
| Grades | Density (g/cm 3) | Density (lb/in 3) | Melting Point (°C) | Melting Point (°F) |
| S32750/S32760 | 7.8 | 0.281 | 1350 | 2460 |
Equivalent Grades for S32750/S32760 Super Duplex Angle, Channel, Beam, Chain
| STANDARD | WERKSTOFF NR. | UNS |
| Super Duplex S32750/S32760 | 1.4410 | S32750 / S32760 |
SS S32750/S32760 Angle, Channel, Beam, Chain Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Sachiya Steel International is one of the well-known manufacturer and exporter of Super Duplex Stainless Steel S32750 Angle And Other Super Duplex Stainless Steel Products, which has better resistance to sea water then Grade 316.
The standard composition of Super Duplex S32750 Angle has over the years been refined by us, and the resulting restricted composition range was endorsed.
Super Duplex S32760 Angle is not generally suitable for use at temperatures above 300 Degree C as it suffers from precipitation of brittle micro constituents, or below -50 Degree C because of its ductile – to – brittle – transition.Super Duplex S32750 Chain has excellent general corrosion resistance, and also superior to Grade 316 in most environments.
Super Duplex S32760 Chain has excellent resistance to localized corrosion including inter – granular, pitting and crevice corrosion, where the CPT is generally at least 35 Degree C. Super Duplex S32750 C-Channel is also resistant to chloride stress corrosion cracking (SCC) at temperatures of up to about 150 Degree C. Super Duplex S32760 C-Channel will often perform well in environments which cause premature failure of austenitic grades.Super Duplex S32750 I-Beam is versatile, general purpose stainless steels with good resistance to atmospheric corrosion, to a lot of organic and inorganic chemicals, and to foods and beverages.
Super Duplex S32750 H-Beam has also been used in vacuum processing equipment and specialized instruments where high integrity is essential.
For optimum corrosion resistance, forged parts of Super Duplex S32750 T-Beam should be subsequently annealed.
Sachiya Steel International is one of the pioneer Manufacture and Exporter of Hastelloy B3 Tube to Female Pipes, which is available in different sizes and shapes for our clients.
Hastelloy B3 Tube Fittings was the first wrought, nickel – chromium – molybdenum material to alleviate concerns over welding (by virtue of extremely low carbon and silicon contents).
As such, Hastelloy B3 Compression Tube Fittings was widely accepted in the chemical process and associated industries, and now has a track record of proven performance in a vast number of corrosive chemicals.Like other nickel alloys, Hastelloy B3 Ferrule Tube Fittings is ductile, easy to form and weld, and possesses exceptional resistance to stress corrosion cracking in chloride – bearing solutions (a form of degradation to which the austenitic stainless steels are prone).
With its high chromium and molybdenum contents, Hastelloy B3 Double Ferrule Tube Fittings is able to withstand oxidizing and non – oxidizing acids, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.
Furthermore, Hastelloy B3 Female Connector Fittings is very resistant to sulphide stress cracking and stress corrosion cracking in sour, oilfield environments.Hastelloy B3 Tube to Female Pipes | Hastelloy B3 Tube to Female Pipes | Hastelloy B3 Tube to Female Pipes | Hastelloy B3 Tube to Female Pipes | Hastelloy B3 Tube to Female Pipes | Hastelloy B3 Tube to Female Pipes | Hastelloy B3 Tube to Female Pipes | Hastelloy B3 Tube to Female Pipes | Hastelloy B3 Tube to Female PipesOne of the chief attributes of Alloy B3 Female Connector Tube Fittings is their resistance to chloride – induced stress corrosion cracking.
When traditional SS 316L has failed, and AL-6XN has reached its material design limit, then these Alloy B3 Tube Fittings is the best option.Hastelloy B3 Tube to Female Pipes SpecificationsSpecifications:ASTM B366 ASME SB 366Size:OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Pressure Rating:3000 – B30 PSIApplicable Temperature:150-400 CType:Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting.
Sachiya Steel International is offering Incoloy 330 Wire to the clients, which is a patented alloy designed specifically for the heat treat industry.
This Incoloy 330 Wire is an austenitic nickel – iron – chromium alloy developed to provide excellent resistance to carburizing and oxidizing atmospheres at elevated temperatures.
Our SS 330 Wire combines excellent resistance to carburization and oxidation at temperatures up to 2200 Degree F (1200 Degree C) with high strength.Many factors go into the selection of this Ra 330 Coil Wire, including availability, versatility to function and resistance to a range of oxidizing and reducing atmospheres common in heat treating.
Our Incoloy 330 Wire is a unique combination of various different metal which combine to form one sturdy alloy out of which sheets are manufactured.
The excellent weldability of this SS 330 Electrode and its ability is to be joined very successfully to other alloys by means of different compositions.The high nickel and chromium of our Ra 330 Welding Electrode provide good resistance to oxidation and carburization.
We can also appoint official certified Inspection Agencies upon request of our clients so that they can witness the material reports, dimensions and quality conformity of our Alloy 330 Wire.
Sachiya Steel International is one of the Leading Manufacture And Exporter for Stainless Steel 310 Tube to Union Fittings, which plants supply in coils or sheets, where the latter being cut on special shear lines.
Stainless Steel 310 Tube Fittings are available in a great variety of surface conditions, often with a specific roughness, electrolytically cleaned, chemically treated, oiled, or coated with metals such as zinc, tin, chromium, and aluminum or with organic substances.
Stainless Steel 310S Compression Fittings are usually produced to strict dimensional tolerances in order to assure efficient performance in the highly demanding operations of automated consumer – products industries.In practice, Stainless Steel 310 Union Fittings are not precisely distinguished by these dimensions, and there is considerable overlap in the use of the two terms.
In principle, Stainless Steel 310S Ferrule Fittings is a melting, purifying, and alloying process carried out at approximately 1,600 Degree C (2,900 Degree F) in molten conditions.
Various chemical reactions are initiated in Stainless Steel 310 Double Ferrule Fittings, either in sequence or simultaneously, in order to arrive at specified chemical compositions and temperatures.Stainless Steel 310 Tube to Union Fittings | Stainless Steel 310 Tube to Union Fittings | Stainless Steel 310 Tube to Union Fittings | Stainless Steel 310 Tube to Union Fittings | Stainless Steel 310 Tube to Union Fittings | Stainless Steel 310 Tube to Union Fittings | Stainless Steel 310 Tube to Union Fittings Indeed, many of the reactions interfere with one another in 310S Stainless Steel Tube Fittings, requiring the use of process models to help in analyzing options, optimizing competing reactions, and designing efficient commercial practices.
These 310S Stainless Steel Tube Fittings are offered at best possible rates to our customers.Stainless Steel 310 / 310S Tube to Union SpecificationsSpecifications:ASTM A276 ASME SA 479Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Stainless Steel, 300/1000/3000PSI for BrassSS 310 / 310S Tube To Union Chemical CompositionGradeCMnSiPSCrMoNiNSS 3100.015 max2 max0.015 max0.020 max0.015 max24.00 – 26.000.10 max19.00 – 21.0054.7 minSS 310S0.08 max2 max1.00 max0.045 max0.030 max24.00 – 26.000.75 max19.00 – 21.0053.095 minStainless Steel 310 / 310S Tube To Union Mechanical PropertiesDensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation7.9 g/cm31402 °C (2555 °F)Psi – 75000 , MPa – 515Psi – 30000 , MPa – 20540 %Equivalent Grades for 310 / 310S Stainless Steel Ferrule Fitting Tube To UnionSTANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENSS 3101.4841S31000SUS 310310S2420Ch25N20S2–X15CrNi25-20SS 310S1.4845S31008SUS 310S310S1620Ch23N18–X8CrNi25-21 SS 310 / 310S Tube To Union Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper Industry
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Incoloy 825 Round Bars, which is extremely resistant to corrosion, even in acidic environment.
Our Incoloy 825 Square Bars is also used in Chemical process equipment, Tank trucks, Propeller shafts, Electrostatic precipitator electrodes, Calorifiers, Hot vessels for food, water and sea – water.
The fabrication of these Incoloy 825 Flat Bars is typical of nickel – base alloys, with material being readily formable and weldable by a variety of techniques.
The titanium addition serves, by means of an appropriate heat treatment, to stabilize our Incoloy 825 Threaded Bars against sensitization to inter – granular corrosion.These Incoloy 825 Hollow Bars is characterized by good toughness, even under continuous operation, at both room and elevated temperatures, up to approximately 550 Degree C (1020 Degree F).
Our Incoloy 825 Hexagonal Bars is a nickel – base alloy generally similar to Alloy 20 in aqueous corrosion, which requires no post – weld heat treatment.
These Incoloy 825 Triangular Bars has good stress corrosion cracking resistance performance, along with good resistance for pitting and crevice corrosion performance.Incoloy 825 Round Bars | Incoloy 825 Round Bars | Incoloy 825 Round Bars | Incoloy 825 Round Bars | Incoloy 825 Round Bars | Incoloy 825 Round Bars | Incoloy 825 Round BarsOur Incoloy 825 Bars is a nickel – iron – chromium alloy with molybdenum and copper added to it, which is often used for components in pickling equipment like tanks, baskets, chains and heating coils.
Ninthore Overseas is one of the Leading Manufacturer And Exporter Of Stainless Steel 304 Flanges, which are used to nickel to maintain an austenitic composition at lower temperatures.
Stainless Steel 304 Slip On Flanges is austenitic stainless steels with superior corrosion resistance to stainless steel 317.
These Stainless Steel 304 Threaded Flanges is suitable for welding because it has carbon content lower than 301 to 303 series alloys to avoid carbide precipitation in welding applications.Equipment in the chemical, food, paper, mining, and pharmaceutical and petroleum industries often includes Stainless Steel 304 Weld Neck Flanges.
The addition of molybdenum and slightly higher nickel content make Stainless Steel 304 Blind Flanges suitable for architectural applications in severe settings, from polluted marine environments to areas with sub-zero temperatures.
Stainless Steel UNS S30400 Socket Weld Flanges also offer higher creep, stress – to – rupture and tensile strength at elevated temperatures, excellent corrosion resistance and strength properties, and they are well suited for fabricated or formed applications.Stainless Steel 304 Flanges | Stainless Steel 304 Flanges | Stainless Steel 304 Flanges | Stainless Steel 304 Flanges | Stainless Steel 304 Flanges | Stainless Steel 304 Flanges | Stainless Steel 304 Flanges | Stainless Steel 304 Flanges| Stainless Steel 304 Flanges | Stainless Steel 304 Flanges Stainless Steel 304 Lap Joint Flanges is ideally suited for applications requiring corrosion resistance superior to Type 316 and has good elevated temperature strength.
Stainless Steel 304 Ring Joint Type Flanges is the lower carbon version and is immune from sensitization.
