Sachiya Steel International is one of the well-established Manufacture and Exporter of Stainless Steel 347H Wire Mesh, which cannot be hardened by heat treatment but can be strengthened by cold working. With over 11 % of chromium, SS 347H Hexagonal Wire Mesh is about 200 times more resistant to corrosion than mild steel. Stainless Steel 347H Welding Wire Mesh contain trace amounts of nickel, 12 % – 17 % chromium, less than 0.1 % carbon, along with other alloying elements, such as molybdenum, aluminum or titanium. These magnetic and heat – treatable SS 347H Netting Wire Mesh are used in knives, cutting tools, as well as dental and surgical equipment.
Our prime aim is to manufacture best quality of Stainless Steel 347H Woven Wire Mesh, along with ingots and forging ingot (alloy & non alloy) to suit the industrial need. We use fine quality of raw materials and scrap for our production of SS 347H Spring Steel Wire Mesh. Our adaptation to new technological inputs and multifaceted infra structural base would ensure quality Stainless Steel 347H Fencing Wire Mesh.
The process of manufacturing 347H Stainless Steel Wire Mesh from raw materials such as scrap and sponge iron involves many sophisticated processes. SS 347H Wire Mesh will have a structure consisting fine materials which, as the Carbon content is raised, transitions to a fully structure and on to one containing free carbide in a matrix of fine materials and even some for the highest Carbon grades.
|
SS 347H Wiremesh Specifications
|
||
| Specifications | : | ASTM A 164 ASME SA 164 |
| Standard | : | ASTM, AISI International Standards |
| Length | : | 30m to 100″ |
| Width | : | 1m to 48″ |
| Type | : | Wire Mesh , Hexagonal Wire mesh, Welding Wire mesh, Netting Wire mesh, Woven Wire mesh , Spring Steel wire mesh, Fencing Wire mesh etc. |
| Grade | C | Mn | Si | P | S | Cr | Cb | Ni | Fe |
| SS 347H | 0.04 – 0.10 | 2.0 max | 1.0 max | 0.045 max | 0.030 max | 17.00 – 20.00 | 8xC – 1.10 | 9.00 – 13.00 | 63.72 min |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.0 g/cm3 | 1454 °C (2650 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 347H | 1.4961 | S34709 | SUS 347H | – | – | – | X6CrNiNb18-12 |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Sachiya Steel International is one of the prominent Manufacture of high quality Stainless Steel 310H Wire Mesh, which Good resistance to mildly corrosive atmospheres, but significantly less than Grade 310H due to the Sulphur addition; the sulphide inclusions act as pit initiation sites.
Grade 310 should not be exposed to marine or other similar environments, as these will result in rapid pitting corrosion.
Because the sulphide inclusions in 310 are primarily aligned along the rolling direction the corrosion resistance is particularly reduced in cross-sections.It is like other common austenitic stainless steels, is subject to stress corrosion cracking in chloride containing environments above about 50°C.
Good oxidation resistance in intermittent service to 760°C and in continuous service to 870°C.
Welds must be annealed for maximum corrosion resistance, but even then poor mechanical and corrosion properties will result.For ultra-high machining rates there are also available special grade variants such as Ugima 303UX.
This includes copper to reduce the work hardening rate, in addition to the usual high Sulphur and Improved Machinability steel making practices.
