Sachiya Steel International offers a wide range of Inconel Alloy 601 Tube to Female Pipes, where oxidation resistance is further enhanced by the aluminum content. Inconel 601 Tube Fittings is used in several industries such as Thermal Processing, Power Generation, Aerospace and Chemical Processing. Tubing in these Inconel 601 Compression Fittings has been used in ceramic tile production in the latest designs of roller hearth ovens as the material resists the high temperature firing cycle and the corrosive effects of the glazes and stucco applied to the tiles.
Inconel 601 Female Connector Fittings is often used in Radiant tubes, Steam super – heater tube supports, Muffles and retorts, Strand annealing tubes, etc. These Inconel 601 Ferrule Fittings has good strength, toughness and ductility, and can be used at cryogenic temperatures. All standard machining operations may be performed on Inconel 601 Double Ferrule Fittings, where best machinability is obtained in the solution – treated condition.
Inconel Alloy 601 Tube to Female Pipes | Inconel Alloy 601 Tube to Female Pipes | Inconel Alloy 601 Tube to Female Pipes | Inconel Alloy 601 Tube to Female Pipes | Inconel Alloy 601 Tube to Female Pipes | Inconel Alloy 601 Tube to Female Pipes | Inconel Alloy 601 Tube to Female Pipes | Inconel Alloy 601 Tube to Female Pipes | Inconel Alloy 601 Tube to Female Pipes
In pollution – control applications, these Inconel 601 Compression Tube Fittings is used for thermal reactors in exhaust systems of gasoline engines and for combustion chambers in solid – waste incinerators. Alloy 601 Tube Fittings is also used in tube supports grid barriers, and ash – handling systems for power generation equipment. These Inconel 601 Compression Fittings is welded using gas – tungsten arc welding, gas metal – arc welding, shielded metal – arc welding, and submerged – arc welding methods.
|
Inconel 601 Tube to Female Pipes Specifications
|
||
| Specifications | : | ASTM B366 ASME SB 366 |
| Size | : | OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″ |
| Thread | : | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
| Pressure Rating |
: | 3000 – 6010 PSI |
| Applicable Temperature |
: | 150-400 C |
| Type |
: | Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting. |
| Grade | C | Mn | Si | Fe | S | Cr | Cu | Ni | |
| 601 | min. | – | – | – | Bal | – | 21.0 | – | 58.0 |
| max. | 0.10 | 1.0 | 0.5 | Bal | 0.015 | 25.0 | 1.0 | 63.0 | |
| Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
| Rockwell B (HR B) max | Brinell (HB) max | ||||
| 601 | Psi – 95,000 , MPa -655 | Psi – 45,000 , MPa – 310 | 40 | – | – |
| Grade | UNS No | Old British | Euronorm | GOST | Japanese JIS | ||
| BS | En | No | AFNOR | ||||
| Inconel 601 | N06601 | NA 49 | NiCr23Fe | 2.4851 | NC23FeA | XH60BT | NCF 601 |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Sachiya Steel International is one of the leading manufacturer and exporter of Inconel 601 Tube to Union Fittings, which are widely applicable for different purposes in different industries.
Inconel 601 Tube Fittings has good hot corrosion resistance under oxidizing conditions, which further offers exceptional resistance to hydrofluoric acid in all concentrations up to the boiling point.
Inconel 601 Ferrule Fittings has good resistance to aqueous corrosion and stands out due to its resistance to high temperature oxidation.
Inconel 601 Double Ferrule Fittings has been successfully used in the following applications, such as copper brazing, annealing and sintering muffles and retorts.Inconel 601 Compression Tube Fittings is also is useful for chemical process equipment such as combustor components, process heaters, and condenser tubes.
Alloy 601 Tube Fittings also has good resistance to aqueous corrosion, has high mechanical strength, and is readily formed, welded and machined.
Alloy 601 Ferrule Fittings is not age – harden able and is only strengthened by cold working, and is often used in fabricated combustion chambers.
Sachiya Steel International is one of the leading manufacturer and exporter of Inconel 601 Tube to Male Fittings, which can operate from cryogenic temperatures up to 645 Degree F (340 Degree C).
The nickel base of Inconel 601 Tube Fittings, in conjunction with substantial chromium content, provides resistance to many corrosive media and high – temperature environments.
The field of use for Inconel 601 Compression Fittings extends to industrial furnace retorts and muffles, jigs, fixtures, baskets, wire annealing tubes which have all been produced in this excellent high temperature material.Inconel 601 Compression Tube Fittings has great aqueous corrosion resistance, high mechanical strength and is easily produced, welded and machined.
Inconel 601 Male Connector Fittings has good resistance to nitriding in dissociated ammonia, and is only outperformed by Inconel 601 in this application.
Solution treating is the treatment normally applied to Inconel 601 Ferrule Fittings involving exposure to temperatures of 1000 Degree F and higher, annealing to parts exposed to temperatures below 1000 Degree F.Inconel 601 Tube to Male Fittings | Inconel 601 Tube to Male Fittings | Inconel 601 Tube to Male Fittings | Inconel 601 Tube to Male Fittings | Inconel 601 Tube to Male Fittings | Inconel 601 Tube to Male Fittings | Inconel 601 Tube to Male Fittings | Inconel 601 Tube to Male FittingsInconel 601 Double Ferrule Fittings is often used for tube supports and ash trays in the power generation industry.
In petrochemical processing, Alloy 601 Tube Fittings is used for catalyst regenerators and air preheaters in the manufacture of high – density polyethylene.
Sachiya Steel International is one of the leading manufacturer and exporter of Inconel 601 Tube to Male Fittings, which can operate from cryogenic temperatures up to 645 Degree F (340 Degree C).
The nickel base of Inconel 601 Tube Fittings, in conjunction with substantial chromium content, provides resistance to many corrosive media and high – temperature environments.
The field of use for Inconel 601 Compression Fittings extends to industrial furnace retorts and muffles, jigs, fixtures, baskets, wire annealing tubes which have all been produced in this excellent high temperature material.Inconel 601 Compression Tube Fittings has great aqueous corrosion resistance, high mechanical strength and is easily produced, welded and machined.
Inconel 601 Male Connector Fittings has good resistance to nitriding in dissociated ammonia, and is only outperformed by Inconel 601 in this application.
Solution treating is the treatment normally applied to Inconel 601 Ferrule Fittings involving exposure to temperatures of 1000 Degree F and higher, annealing to parts exposed to temperatures below 1000 Degree F. Inconel 601 Double Ferrule Fittings is often used for tube supports and ash trays in the power generation industry.In petrochemical processing, Alloy 601 Tube Fittings is used for catalyst regenerators and air preheaters in the manufacture of high – density polyethylene.
Alloy 601 Compression Fittings is also used in tubes, retorts, chain curtains, flame shields and conveyor belts for industrial furnaces.
Sachiya Steel International deals in an all-embracing range of Inconel Alloy 718 Tube to Female Pipes, which is age – harden able with a unique property of slow aging response that permits heating and cooling during annealing without the danger of cracking.
Inconel 718 Tube Fittings can be readily machined but due to its high strength and work hardening characteristics, tooling, operating speeds and coolants should be considered.After fabrication, Inconel 718 Compression Fittings can be heat treated as required and as per the applicable specification.
Inconel 718 Female Connector Fittings is usually provided in the solution annealed condition, but can be also being supplied in the aged hardened or precipitation heat treated condition prior to forming.
Inconel 718 Ferrule Fittings has been used world – wide in aerospace, aircraft, oil, and chemical industries, and also nuclear power plants because of its high strength, excellent ductility, good formability and weldability, etc.Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female PipesThese Inconel 718 Double Ferrule Fittings is actually an age – harden able Nickel – Chromium – Columbium (Niobium) – Molybdenum alloy with high strength, corrosion – resistance, and good fabrication characteristics.
Inconel 718 Compression Tube Fittings is a high strength nickel – chromium material and a nickel super alloy frequently used for cryogenic storage tanks, turbines, down hole shafting and well head parts.
We have met every challenge of providing quality, timely, cost – effective solutions for these Alloy 718 Tube Fittings and specialty fastener applications.Inconel 718 Tube to Female Pipes SpecificationsSpecifications:ASTM B366 ASME SB 366Size:OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Pressure Rating:3000 – 7180 PSIApplicable Temperature:150-400 CType:Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting.
