Sachiya Steel International is one of the well-known Manufacture and exporter for high quality Stainless Steel 310 Threaded Forged Fittings, which are reduced to iron, also called hot metal or pig iron. After casting and rolling, Stainless Steel 310 Forged Threaded Elbow is delivered as coil, plate, sections or bars. Stainless Steel 310S Forged Threaded Tee made in fine quality uses electricity to melt recycled steel. Additives, such as Stainless Steel 310 Forged Threaded Cross are used to adjust to the desired chemical composition.
Electrical energy in Stainless Steel 310S Forged Threaded Cap can be supplemented with oxygen injected into the EAF. Another steelmaking technology, the open hearth furnace (OHF), makes up about 0.4 % of Stainless Steel 310 Forged Threaded production. The OHF process of Stainless Steel 310S Forged Threaded Coupling is very energy intensive and is in decline owing to its environmental and economic disadvantages. Stainless Steel 310 Forged Threaded Union remain in use for decades before they can be recycled.
Stainless Steel 310 Threaded Forged Fittings | Stainless Steel 310 Threaded Forged Fittings | Stainless Steel 310 Threaded Forged Fittings | Stainless Steel 310 Threaded Forged Fittings | Stainless Steel 310 Threaded Forged Fittings | Stainless Steel 310 Threaded Forged Fittings | Stainless Steel 310 Threaded Forged Fittings | Stainless Steel 310 Threaded Forged Fittings | Stainless Steel 310 Threaded Forged Fittings
Therefore, there is not enough recycled Stainless Steel 310S Forged Threaded Bushing to meet growing demand using the EAF steelmaking method alone. Demand of Stainless Steel 310 Forged Threaded Plug is met through a combined use of different production methods. All of these production methods can use recycled Stainless Steel 310S Forged Threaded Hex Plus as an input, where it contains recycled steel.
Stainless Steel 310/310S Forged Threaded Fittings Specifications |
||
| Specifications | : | ASTM A182 & ASME SA182 |
| Size | : | 1/8” NB to 4” NB (Socket weld & Screwed-Threaded) |
| Standards |
: | ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
| Class | : | 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS |
| Type | : | Threaded Fittings |
SS 310/310S Forged Fittings Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | Fe |
| SS 310 | 0.015 max | 2 max | 0.15 max | 0.020 max | 0.015 max | 24 – 26 | 0.10 max | 19 – 21 | 54.7 min |
| SS 310s | 0.08 max | 2 max | 1.00 max | 0.045 max | 0.030 max | 24 – 26 | 0.75 max | 19 – 21 | 53.095 min |
Stainless Steel 310/310S Threaded Fitting Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 7.9 g/cm3 | 1402 °C (2555 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 40 % |
Equivalent Grades for 310/310S Stainless Steel Forged Fittings
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 310 | 1.4841 | S31000 | SUS 310 | 310S24 | 20Ch25N20S2 | – | X15CrNi25-20 |
| SS 310S | 1.4845 | S31008 | SUS 310s | 310S16 | 20Ch23N18 | – | X8CrNi25-21 |
Stainless Steel 310/310S Forged Fittings Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
For more details:
Web: https://steeltube.co.in/
Phone: +91 9769056007
E-Mail: [email protected]
Sachiya Steel International is one of the well-known Manufacture and exporter for high quality Stainless Steel 310 Threaded Forged Fittings, which are reduced to iron, also called hot metal or pig iron.
After casting and rolling, Stainless Steel 310 Forged Threaded Elbow is delivered as coil, plate, sections or bars.
Stainless Steel 310S Forged Threaded Tee made in fine quality uses electricity to melt recycled steel.
Additives, such as Stainless Steel 310 Forged Threaded Cross are used to adjust to the desired chemical composition.Electrical energy in Stainless Steel 310S Forged Threaded Cap can be supplemented with oxygen injected into the EAF.
Another steelmaking technology, the open hearth furnace (OHF), makes up about 0.4 % of Stainless Steel 310 Forged Threaded production.
The OHF process of Stainless Steel 310S Forged Threaded Coupling is very energy intensive and is in decline owing to its environmental and economic disadvantages.
Sachiya Steel International is one of the Leading Manufacturer And Exporter high quality Stainless Steel 310 Threaded Forged Fittings, which are reduced to iron, also called hot metal or pig iron.
After casting and rolling, Stainless Steel 310 Forged Threaded Elbow is delivered as coil, plate, sections or bars.
Stainless Steel 310S Forged Threaded Tee made in fine quality uses electricity to melt recycled steel.
Additives, such as Stainless Steel 310 Forged Threaded Cross are used to adjust to the desired chemical composition.Electrical energy in Stainless Steel 310S Forged Threaded Cap can be supplemented with oxygen injected into the EAF.
Another steelmaking technology, the open hearth furnace (OHF), makes up about 0.4 % of Stainless Steel 310 Forged Threaded production.
The OHF process of Stainless Steel 310S Forged Threaded Coupling is very energy intensive and is in decline owing to its environmental and economic disadvantages.
Sachiya Steel International is one of the well-known Manufacture And Exporter of Stainless Steel 410 Forged Threaded Fittings, which display good resistance to scaling in continuous service up to 650 Degree C. Small sections of Stainless Steel 410 Forged Threaded Elbow can be air cooled and larger sections oil quenched for maximum through hardness.
Pre hardened and tempered Stainless Steel 410 Forged Threaded Tee will also respond readily to nitriding achieving a typical surface hardness.The nitriding process of Stainless Steel 410 Forged Threaded Cross however reduces the corrosion resistance and is therefore not generally recommended except for critical applications where the benefit outweighs all other considerations.
Stainless Steel 410 Forged Threaded Cap is used for parts requiring a combination of good strength and toughness, plus reasonable corrosion resistance.Stainless Steel 410 Forged Threaded Fittings | Stainless Steel 410 Forged Threaded Fittings | Stainless Steel 410 Forged Threaded Fittings | Stainless Steel 410 Forged Threaded Fittings | Stainless Steel 410 Forged Threaded Fittings | Stainless Steel 410 Forged Threaded Fittings |Use of Stainless Steel 410 Forged Threaded Fittings at higher working temperatures results in a substantial drop in tensile strength and hardness with subsequent increase in ductility.
Stainless Steel 410 Forged Threaded Coupling is not recommended for use at sub – zero temperatures due to a substantial drop in impact properties consistent with most steels other than the austenitic steel types.
In the hardened and tempered as supplied condition, Stainless Steel 410 Forged Threaded Union will be more difficult due to the high yield strength which must be taken into account.
Stainless Steel 410 Forged Threaded Fittings SpecificationsSpecifications:ASTM A182 & ASME SA182Size:1/8” NB to 4” NB (Socket weld & Screwed-Threaded)Standards:ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799Class:2000 LBS, 3000 LBS, 6000 LBS, 9000 LBSType:Threaded Fittings SS 410 Forged Fittings Chemical CompositionGradeCMnSiPSCrMoNiNSS 4100.15 max1.00 max1.00 max0.040 max0.030 max11.50 – 13.50–0.75 max–Stainless Steel 410 Threaded Fitting Mechanical PropertiesDensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation7.8 g/cm31400 °C (2550 °F)Psi – 65000 , MPa – 450Psi – 30000 , MPa – 20520%Equivalent Grades for 410 Stainless Steel Forged FittingsSTANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENSS 4101.4006S41000SUS 410410S21––X12Cr13 Stainless Steel 410 Forged Fittings Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper Industry
Sachiya Steel International is one of the Leading Manufacture and Exporter of Stainless Steel 317L Threaded Forged Fittings, which show a much smaller rate of abrasion volume loss with increase in abrasion velocity than the austenitic steels.
Stainless Steel 317L Forged Threaded Elbow derive their outstanding properties from their capacity to resist unstable fracture of micro shear lips on the abraded surface.
This is due to the strain capacity in Stainless Steel 317L Forged Threaded Tee afforded by the mechanical inducement of the martensitic phase transformations and the high work – hardening characteristics of the transformation product.The influence of this transformation has been studied as a function of prior cold work and velocity of abrasion on a range of austenitic Stainless Steel 317L Forged Threaded Cross.
Notwithstanding these advantages of the austenitic grades, Stainless Steel 317L Forged Threaded Cap are superior in terms of cost per unit volume lost and the new ferritic – martensitic steel designated has potential as an abrasion resisting material in corrosive environments.Stainless Steel 317L Threaded Forged Fittings | Stainless Steel 317L Threaded Forged Fittings | Stainless Steel 317L Threaded Forged Fittings | Stainless Steel 317L Threaded Forged Fittings | Stainless Steel 317L Threaded Forged Fittings | Stainless Steel 317L Threaded Forged Fittings | Stainless Steel 317L Threaded Forged Fittings Complex design requirements can make Stainless Steel 317L Forged Threaded fittings necessary to combine different metallic materials within the same component.
Also, chance combinations can often be found in Stainless Steel 317L Forged Threaded Coupling, governed only by the availability of, for instance, fasteners or shims.
In certain circumstances, such mixed – material designs of Stainless Steel 317L Forged Threaded Union can lead to corrosion in one of the partner materials.
