Sachiya Steel International is one of the prominent Manufacture and Exporter of Hastelloy C276 Angle And Other Hastelloy Products , which has superior resistance to corrosion and to both oxidizing and reducing media. A solution anneal of Hastelloy C276 Angle at 2165 Degree F (1185 Degree C) followed by water quenching will restore optimum mechanical properties after hot work, and will give optimum corrosion resistance. Hastelloy C276 C-Channel is the most universally corrosion resistant material commonly available today.
Hastelloy C276 Chain has superb resistance to corrosion by seawater, also to pitting (due to its high molybdenum content), stress – corrosion cracking and to oxidizing atmospheres. Hastelloy C276 I-Beam cannot be hardened by heat treatment although it can be hardened by cold working. Hastelloy C276 T-Beam is certified for oil and gas service, which is further also approved as a material for construction by the ASME Boiler and Pressure Vessel Code.
Hastelloy C276 Angle | Hastelloy C276 Angle | Hastelloy C276 Angle | Hastelloy C276 Angle | Hastelloy C276 Angle | Hastelloy C276 Angle | Hastelloy C276 Angle | Hastelloy C276 Angle | Hastelloy C276 Angle
Hastelloy C276 H-Beam may be welded by the gas – metal – arc, gas – tungsten – arc and shielded – metal – arc processes. Alloy C276 Angle may normally be used in the as – welded condition, but a post – weld anneal will result in optimum corrosion resistance. Alloy C276 Chain resists the formation of grain-boundary precipitates in the weld heat – affected zone. This makes Alloy C276 C-Channel suitable for most chemical process applications in the as-welded condition. Because of its adaptability, Alloy C276 I-Beam can be used where “upset” conditions are likely to occur or in multipurpose plants.
Hastelloy C276 Angle, Channel, Beam, Chain Specifications |
||
| Specifications | : | ASTM B574 / ASME B574 |
| Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Hastelloy C276 Angle |
: | 5mm to 9mm |
| Hastelloy C276 Channel |
: | 40mm*20mm~300mm*300mm |
| Hastelloy C276 Beam | : | 3″ thru 12.31″ |
| Hastelloy C276 Chain |
: | 1/8 inch – 1/2 inch Diameter |
| Thickness |
: | 3.0mm – 120mm |
| Length | : | 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes |
| Type | : | Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain |
C276 Hastelloy Angle, Channel, Beam, Chain Chemical Composition
| Grade | C | Mn | Si | Co | P | Fe | Mo | Ni | Cr | S | W | V |
| Hastelloy C276 | 0.010 max | 1 max | 0.08 max | 2.5 max | 0.04 max | 4 – 7 | 15 – 17 | Bal | 14.5-16.5 | 0.03 max | 3.0-4.5 | 0.35 max |
Hastelloy C276 Angle, Channel, Beam, Chain Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.89 g/cm3 | 1370 °C (2500 °F) | Psi – 1,15,000 , MPa – 790 | Psi – 52000 , MPa – 355 | 40% |
Equivalent Grades for C276 Hastelloy Angle, Channel, Beam, Chain
| STANDARD | WERKSTOFF NR. | UNS | JIS | EN | GOST | OR |
| Hastelloy C276 | 2.4819 | N10276 | NW 0276 | NiMo16Cr15W | ХН65МВУ | ЭП760 |
Hastelloy C276 Angle, Channel, Beam, Chain Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
For More Details
Visit Our Website : https://steeltube.co.in/
Contact us- +91 9769056007
email us - [email protected]
Sachiya Steel International is one of the prominent exporter and seller of Hastelloy C276 Angle Other Products , which has superior resistance to corrosion and to both oxidizing and reducing media.
A solution anneal of Hastelloy C276 Angle at 2165 Degree F (1185 Degree C) followed by water quenching will restore optimum mechanical properties after hot work, and will give optimum corrosion resistance.Hastelloy C276 C-Channel is the most universally corrosion resistant material commonly available today.
Hastelloy C276 Chain has superb resistance to corrosion by seawater, also to pitting (due to its high molybdenum content), stress – corrosion cracking and to oxidizing atmospheres.Hastelloy C276 Angle | Hastelloy C276 Angle | Hastelloy C276 Angle | Hastelloy C276 Angle Hastelloy C276 I-Beam cannot be hardened by heat treatment although it can be hardened by cold working.
Hastelloy C276 T-Beam is certified for oil and gas service, which is further also approved as a material for construction by the ASME Boiler and Pressure Vessel Code.Hastelloy C276 H-Beam may be welded by the gas – metal – arc, gas – tungsten – arc and shielded – metal – arc processes.
Alloy C276 Angle may normally be used in the as – welded condition, but a post – weld anneal will result in optimum corrosion resistance.
Alloy C276 Chain resists the formation of grain-boundary precipitates in the weld heat – affected zone.
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Alloy Steel F5 Threaded Forged Fittings, which should be machined in the annealed condition using surface speeds.
The parts should then be Alloy Steel F5 Forged Threaded Elbow Fittings which is generally considered to be weldable by the common fusion and resistance techniques.
For maximum corrosion resistance to chemical environments, it is essential that the surface of Alloy Steel F5 Forged Threaded Tee Fitting be free of all heat tint or oxide formed during annealing or hot working.
All surfaces of Alloy Steel F5 Forged Threaded Cross Fitting must be ground or polished to remove any traces of oxide and surface decarburization.Alloy Steel F5 Forged Threaded Cap Fittings useful for storing and handling acetic acid, especially in solutions where it is combined with formic acid and when aeration is not present (oxygen helps protect stainless steel under such conditions), though it provides the greatest level of resistance to corrosion.Alloy Steel F5 Forged Threaded Bend Fitting can be used in continuous service up to 1300 Degree F (705 Degree C), where scaling becomes excessive above 1500 Degree F (811 Degree C) in intermittent service.
There are various sizes, shapes and surface finishes of Alloy Steel F5 Forged Threaded Coupling Fittings to suit the environment the alloy must endure.
Alloy Steel F5 Forged Threaded Union Fittings is used for corrosion – resistant tools such as this nutcracker.Alloy Steel F5 Threaded Forged Fittings SpecificationsSpecifications:ASTM A182 & ASME SA182Size:1/2″ NB TO 48″ NB.Standards:ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799Class:2000 LBS, 3000 LBS, 6000 LBS, 9000 LBSType:Threaded Forged Fittings Alloy Steel F5 Threaded Forged Fitting Chemical Composition GradeCMnSiSPCrMoAlloy Steel F50.15 max0.3-0.60.50.030.034-60.044-0.65 Alloy Steel Grade F5 Threaded Forged Fitting Mechanical Properties Tensile StrengthYield Strength (0.2%Offset)Elongation27548520 % Alloy Steel F5 Threaded Forged Fitting Application Industries Off-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
Sachiya Steel International is one of the leading manufacturer and exporter of Hastelloy B3 Threaded Forged Fittings, where it is the duty of our team members to check these products for any kind of finishing flaw thereby attaining utmost contentment of the customers.
Hastelloy B3 Forged Threaded Elbow Fittings (UNS N10675) also has excellent resistance to pitting corrosion and to stress-corrosion cracking.
Hastelloy B3 Forged Threaded Tee Fittings also withstands sulfuric, acetic, formic and phosphoric acids, and other non-oxidizing media.
Hastelloy B3 Forged Threaded Cross Fittings is a nickel – molybdenum alloy with excellent resistance to pitting, corrosion and stress-corrosion cracking, plus thermal stability superior to that of alloy B-2.Hastelloy B3 Forged Threaded Cap Fittings has greatly improved structural stability compared with previous B-type alloys, leading to fewer concerns during welding, fabrication, and service.
Meanwhile, these Hastelloy B3 Forged Threaded Bend Fittings are also being offered in customized sizes and shapes to our customers.
Titanium nitrides and carbides in Hastelloy B3 Forged Threaded Coupling Fittings are visible in polished micro – specimens at magnifications of 50X or greater.Hastelloy B3 Threaded Forged Fittings | Hastelloy B3 Threaded Forged Fittings | Hastelloy B3 Threaded Forged Fittings | Hastelloy B3 Threaded Forged Fittings | Hastelloy B3 Threaded Forged Fittings | Hastelloy B3 Threaded Forged Fittings | Hastelloy B3 Threaded Forged Fittings | Hastelloy B3 Threaded Forged Fittings | Hastelloy B3 Threaded Forged FittingsHastelloy B3 Forged Threaded Union Fittings appear as small, randomly dispersed, angular – shaped inclusion, where the color varies from orange – yellow for the nitride to gray – lavender for the carbide.
Sachiya Steel International is one of the Leading Manufacturer And Exporter Of high quality Stainless Steel 310 Flanges, where the heat treatment is given on the continuously rolling hearth furnace and the furnace is fitted with temperature recorders and controllers.
After the heat treatment process, Stainless Steel 310 Slip On Flanges and pipes are straightened and subjected to pickling for removing scales from the surface.
In some cases, the required size of Stainless Steel 310S Threaded Flanges may not be obtained from the mill directly, so then the cold operation process can be used to obtain the desired size.In cold drawing process, Stainless Steel 310S Weld Neck Flanges are coated with oxalic and soap solution.
This solution in Stainless Steel 310S Blind Flanges acts as a lubricant to reduce friction while cold drawing operation.
In the cold drawing process, Stainless Steel UNS S31000 / S31008 Socket Weld Flanges is drawn over the bench using die plugs.
The drawn – out Stainless Steel 310S Lap Joint Flanges is then subjected to cleaning, heat treatment, pickling and straightening.Stainless Steel 310 Flanges| Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges Stainless Steel 310 Ring Joint Type Flanges is marked with grade of material, size, heat number and the stamp of third party inspection before passing on to stainless steel pipe exporters.
Ninthore Overseas is one of the Leading Manufacturer And Exporter Of high quality Stainless Steel 310 Flanges , where the heat treatment is given on the continuously rolling hearth furnace and the furnace is fitted with temperature recorders and controllers.
After the heat treatment process, Stainless Steel 310 Slip On Flanges and pipes are straightened and subjected to pickling for removing scales from the surface.
In some cases, the required size of Stainless Steel 310S Threaded Flanges may not be obtained from the mill directly, so then the cold operation process can be used to obtain the desired size.In cold drawing process, Stainless Steel 310S Weld Neck Flanges are coated with oxalic and soap solution.
This solution in Stainless Steel 310S Blind Flanges acts as a lubricant to reduce friction while cold drawing operation.
In the cold drawing process, Stainless Steel UNS S31000 / S31008 Socket Weld Flanges is drawn over the bench using die plugs.
The drawn – out Stainless Steel 310S Lap Joint Flanges is then subjected to cleaning, heat treatment, pickling and straightening.Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 FlangesStainless Steel 310 Ring Joint Type Flanges is marked with grade of material, size, heat number and the stamp of third party inspection before passing on to stainless steel pipe exporters.
Sachiya Steel International is pioneer Manufacture and Exporter of quality SMO 254 Tube to Female Pipes, which is commercially pure (99.6 %) wrought nickel.
SMO 254 Tube Fittings is normally limited to service at temperatures below 600 Degree F. At higher temperatures, SMO 254 Compression Fittings can suffer from graphitization which can result in severely compromised properties.
All hot working and cold working practices for SMO 254 Female Connector Fittings can be utilized when shaping this alloy.SMO 254 Tube to Female Pipes | SMO 254 Tube to Female Pipes | SMO 254 Tube to Female Pipes | SMO 254 Tube to Female Pipes | SMO 254 Tube to Female Pipes | SMO 254 Tube to Female Pipes | SMO 254 Tube to Female Pipes Hot working temperatures should be between 1200 Degree F and 2250 Degree F in SMO 254 Ferrule Fittings, with heavy forming to be performed at temperatures above 1600 Degree F. Annealing of SMO 254 Double Ferrule Fittings should be performed at a temperature between 1300 Degree F and 1600 Degree F. Care should be taken when choosing the anneal temperature and time at temperature for this can greatly influence the mechanical properties and structure of Alloy 254 Female Connector Fittings.When operating temperatures in Alloy 254 Compression Tube Fittings are expected to exceed 600 Degree F, carbon content becomes critical.
The lower carbon content of Alloy 254 Tube Fittings makes the material resistant to graphitization and therefore less subject to embrittlement.
Alloy 254 Compression Fittings is approved for construction of pressure vessels and components under ASME Boiler and Pressure Vessel Code Section VIII, Division 1.
Alloy 254 Ferrule Fittings has good mechanical properties and excellent resistance to many corrosive environments.
