logo
logo
Sign in

Troubleshooting a Sprinkler Pump

avatar
Customirrigation

The best way to provide water to a particular land area is to employ a sprinkler or irrigation system. You can install a sprinkler system in your lawn to irrigate the grasses to make them green and healthy. You can take advantage of the irrigation pumps to water your crops. 

In this article, we will talk about a sprinkler pump. It provides constant water flow in a park or garden and offers a pleasant look to that area. The sprinkler pump is set between two things, including the water source and sprinkler valves. The sprinkler receives water from the pump and then sprays. After all, you will have some issues with your sprinkler pump over time. To get irrigation sprinkler pump repair in Orlando, contact us at our official website. 

But if you want to troubleshoot the problems yourself, you will need to learn some skills. And we are going to cover the same in this article. So, let's see how you can resolve the common issues without needing a professional without any delay. 

  1. Find the main electrical panel for the sprinkler pump—power off the electricity by shutting down the breaker. Make sure you are using a separate circuit breaker to run the sprinkler pump. 
  2. Make sure you have successfully turned off the electrical breaker. It will let you start a safe troubleshooting process. If you don't know how to turn off the electricity, hire us. You can also contact us for deep well water pump repair in Orlando. 
  3. Go to the pump. You can find it near the main water supply of your home. After finding the sprinkler pump, see the following steps.
  4. You have to look at the internal electrical connections of the pump. If you find any loose wire, reconnect it. 
  5. Check the outside area of the pump. Make sure the outdoor area of the pump is safe from cracks. Cracks are responsible for irregular water pressure. 
  6. Find the suction pipe and observe it properly. Make sure its joints have no cracks. Cracks in suction pipes result in poor water flow. 
  7. If you use the sprinkler pump after two or three months, you will need to create water pressure by filling the pump with water. If you don't know how to fill water back into the pump, follow your model's instructions. 
  8. Observe the housing vent and use a piece of cloth to take away debris from it. Any dust or debris in the housing vent can cause other issues to the pump. 
  9. After performing all the above steps successfully, go to the electrical panel of the pump and resume the power. 
  10. Go to the irrigation control panel and start the sprinkler pump. If the pump is working correctly, give a pat on your back as you are now skilled in fixing common problems of a sprinkler pump. 

Conclusion 

 It is all you need to know about how to fix the common issues of a sprinkler pump. If you are looking for irrigation sprinkler pump repair in Orlando, kindly contact us to avail of our services.                  

collect
0
avatar
Customirrigation
guide
Zupyak is the world’s largest content marketing community, with over 400 000 members and 3 million articles. Explore and get your content discovered.
Read more