Sachiya Steel International is one of the Leading Manufacture And Exporter of Hastelloy X Wire which is known for its excellent high temperature strength withstanding up to 2200 Degree F. Hastelloy X Wire can also be easily fabricated with forming and welding characteristics by both manual and automatic methods. Our Hastelloy X Coil Wires offers exceptional performance in furnace rolls or other industrial furnace applications because of the alloy’s strong resistance to oxidizing, reducing and neutral atmospheres.
In addition, Hastelloy X Wire is widely used for a variety of chemical processing parts, including retorts, pyrolysis tubing, and muffles due to its exceptional resistance to stress – corrosion cracking. Our Hastelloy X wire is normally supplied in the solution – treated condition, following a treatment at 2150 Degree F (1175 Degree C) and rapid cooling. Bright annealed parts of Hastelloy X Wires are cooled in hydrogen, where high – speed steel or cast – alloy tools are recommended.
The machinability rating of our Alloy X Coil Wire is 27 %, where slow speeds, positive feeds and rigid equipment are the order of the day. Alloy X Wire has low hardness, good ductility and good weldability, making the metal easy to fabricate. Our Alloy X Wire has a low work – hardening rate, but it may be cold worked to moderately high strength levels while maintaining ductility.
|
Hastelloy X Wire Specifications
|
||
| Specifications | : | AMs 5754 AMS 5798 |
| Dimensions | : | ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360 |
| Length | : | 100 mm TO 6000 mm |
| Diameter | : | 10 mm To 100 mm |
| Specialize | : | Filler Wire, Coil Wire |
| Grade | C | Mn | Si | Co | P | Fe | Mo | Ni | Cr | S |
| Hastelloy X | 0.05 – 0.15 | 1.00 max | 1.00 max | 0.50 – 2.50 | 0.04 max | 17.00 – 20.00 | 8.00 – 10.00 | Balance | 20.50 – 23.00 | 0.03 max |
| Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
| 8.22 g/cm3 | 1355 °C | MPa – 665 | MPa – 240 | 35 % |
| STANDARD | WERKSTOFF NR. | UNS | JIS | EN |
| Hastelloy X | 2.4665 | N06002 |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Sachiya Steel International is one of the well-known manufacturers for Hastelloy C22 Wire which is selected over different alloys for the clamshell bellows after extensive testing.
Analysis of corrosion resistance of the tested material can also be performed in Hastelloy C22 Wire and the results provided to the customer as a free technical service.
Hastelloy C22 Wire is tested for this hydrofluoric acid pre – scrubber after the original material failed.
Sleeved electro – galvanizing finishing rolls made of Hastelloy C22 Coil Wire are ready for placement in a steel finishing manufacturing line.Conditions were so severe in C-stage bleaching operations at one mill that even Hastelloy C22 Electrode welds were suspect.
As a preventive maintenance measure, three millimeters was ground off each weld and replaced with a weld deposit of Hastelloy C22 Electrode.
These Alloy C22 Coil Wire helps reduce defects on the rolls which is necessary to produce defect free galvanized steel for the automotive industry.Alloy C22 Wire had four times better corrosion resistance than the original material and 20 percent better than the other alloys at 150 Degree F to 200 Degree F. Solid rocket propellant effluents and salt air in Alloy C22 Wire causes pitting and crevice corrosion attack of stainless steel.
Sachiya Steel International is one of the pioneer Manufacture and Exporter of Hastelloy X Angle And Other Hastelloy Products, where its behavior occurs as a consequence of the precipitation of deleterious phases.
When exposed for prolonged periods at intermediate temperatures, Hastelloy X Angle exhibits a loss of room temperature ductility in much the same fashion as some other solid – solution –strengthened super alloys.
Wear results shown in Hastelloy X Chain is generated for standard matching material room – temperature pin on disc tests, where wear depths are given as a function of applied load.The results indicate that Hastelloy X C-Channel is superior in galling resistance to many materials and is surpassed, which were specifically designed to have excellent wear resistance.
Hastelloy X I-Beam are work harden rapidly during machining and require more power to cut than do the plain carbon steels.
Hastelloy X T-Beam is ‘gummy,’ with chips that tend to be stringy and tough, where machine tools should be rigid and used to no more than 75 % of their rated capacity.Both work piece and tool in Hastelloy X H-Beam should be held rigidly, and so tool overhang should be minimized.
Rigidity of Alloy X Chain is particularly important when machining titanium, as titanium has a much lower modulus of elasticity than either steel or nickel alloys.
Sachiya Steel International offers Hastelloy Alloy X Forged Threaded Fittings in a wide range, which has some excellent features to offer such as high tensile strength, fine finish standards, abrasion resistant, and more.
Although Hastelloy X Forged Threaded Elbow Fittings (UNS N06002) is primarily noted for heat and oxidation resistance, it also has good resistance to chloride stress – corrosion cracking and has good resistance to carburization, excellent resistance to reducing or carburizing atmospheres.
Oxidation resistance of Hastelloy X Forged Threaded Tee Fittings is excellent up to 2200 Degree F.Hastelloy X Forged Threaded Cross Fittings has excellent forming and welding characteristics.
Hastelloy X Forged Threaded Cap Fittings also has performed well in jet engine tailpipes, afterburner components, cabin heaters, and other aircraft parts.
Meanwhile, these Hastelloy X Forged Threaded Bend Fittings are also being offered in customized sizes and shapes to our customers.
Typical operating temperatures of Hastelloy X Forged Threaded Coupling Fittings are 500 Degree F to -20 Degree F.Hastelloy Alloy X Forged Threaded Fittings | Hastelloy Alloy X Forged Threaded Fittings | Hastelloy Alloy X Forged Threaded Fittings | Hastelloy Alloy X Forged Threaded Fittings | Hastelloy Alloy X Forged Threaded Fittings | Hastelloy Alloy X Forged Threaded Fittings | Hastelloy Alloy X Forged Threaded Fittings | Hastelloy Alloy X Forged Threaded FittingsHastelloy X Forged Threaded Union Fittings can be bent up to 180 degrees with a maximum allowable thinning of 10 % and flattening of 8 % depending on tube OD and wall thickness and will maintain their physical properties.
Sachiya Steel International is one of the well – known manufacturer and Exporter of Hastelloy B3 Angle And Other Hastelloy Products, which offers great resistance in the strong acidic and alkali media and prevents pitting, crevice corrosion and SCC.
Hastelloy B3 Angle also offers wide resistance to wet chloride gas, hypochlorite and chlorine dioxide media.
Hastelloy B3 C-Channel prevents the localized and inter – granular corrosion in the presence of strong acids such as sulphuric acid, phosphoric acid, hydrochloric acid, nitric acid and organic acid.
Hastelloy B3 Chain provides excellent corrosion resistance to the entire magnitudes of sulphuric acid up to 95 Degree C or 200 Degree F.For chloride concentrations about or above 0.1 % and of pH 2, Hastelloy B3 H-Beam is fit for use.
Hastelloy B3 I-Beam is suitable for use in the highest temperature media in FGD system and its components such as fan wheels, dampers, liquid spray and pipes.
Hastelloy B3 T-Beam produced by us is valued in the diverse industrial fields such as paper.
