Sachiya Steel International is one of the Leading Manufacture And Exporter for Stainless Steel 310 Tube to Male Fittings, which is the absorption and removal of the two gases hydrogen and nitrogen. Hydrogen can enter liquid in these Stainless Steel 310 Tube Fittings from moist air, damp refractories, and wet flux and alloy additions. Our Stainless Steel 310S Compression Fittings causes brittleness of solidified steel — especially in large pieces, such as heavy forgings, that do not permit the gas to diffuse to the surface. Hydrogen in these Stainless Steel 310 Male Connector Fittings can also form blowholes in castings, where like hydrogen, element of nitrogen substantially decreases the ductility of steel.
Nitrogen in Stainless Steel 310S Ferrule Tube Fittings does not move into and out of liquid steel as easily as hydrogen, but it is well absorbed by liquid steel in the high – temperature zones of an electric arc or oxygen jet, where nitrogen molecules (N2) are broken up into atoms (N). These Stainless Steel 310 Double Ferrule Tube Fittings takes place in containers lined with basic refractories.
Stainless Steel 310 Tube to Male Fittings | Stainless Steel 310 Tube to Male Fittings | Stainless Steel 310 Tube to Male Fittings | Stainless Steel 310 Tube to Male Fittings | Stainless Steel 310 Tube to Male Fittings | Stainless Steel 310 Tube to Male Fittings | Stainless Steel 310 Tube to Male Fittings
Our SS 310S Tube Fittings may be bricks or ram material made of highly stable oxides, such as magnetite, alumina, or the double oxides chrome – magnetite and dolomite. These SS 310 Compression Fittings is desirable that the refractories not participate in the steelmaking reactions, but unfortunately they do erode and corrode.
Stainless Steel 310/310S Tube to Male Fittings Specifications |
||
Specifications | : | ASTM A276 ASME SA 479 |
Tube Size | : | 6mm to 38mm to 1/4″ to 1 1/2″ |
Thread |
: | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
Brass | : | ASTM B16 ASTM B 453 |
Pressure Rating | : | 6000PSI for Stainless Steel, 300/1000/3000PSI for Brass |
SS 310/310S Tube To Male Fittings Chemical Composition
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
SS 310 | 0.015 max | 2 max | 0.015 max | 0.020 max | 0.015 max | 24.00 – 26.00 | 0.10 max | 19.00 – 21.00 | 54.7 min |
SS 310S | 0.08 max | 2 max | 1.00 max | 0.045 max | 0.030 max | 24.00 – 26.00 | 0.75 max | 19.00 – 21.00 | 53.095 min |
Stainless Steel 310/310S Tube To Male Fittings Mechanical Properties
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
7.9 g/cm3 | 1402 °C (2555 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 40 % |
Equivalent Grades for 310/310S Stainless Steel Ferrule Fitting Tube To Male Fittings
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
SS 310 | 1.4841 | S31000 | SUS 310 | 310S24 | 20Ch25N20S2 | – | X15CrNi25-20 |
SS 310S | 1.4845 | S31008 | SUS 310S | 310S16 | 20Ch23N18 | – | X8CrNi25-21 |
SS 310/310S Tube To Male Fittings Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry