Sachiya Steel international is one of the Leading Manufacture And Exporter for Stainless Steel 310 Tube to Male Fittings, which is the absorption and removal of the two gases hydrogen and nitrogen. Hydrogen can enter liquid in these Stainless Steel 310 Tube Fittings from moist air, damp refractories, and wet flux and alloy additions. Our Stainless Steel 310S Compression Fittings causes brittleness of solidified steel — especially in large pieces, such as heavy forgings, that do not permit the gas to diffuse to the surface.
Hydrogen in these Stainless Steel 310 Male Connector Fittings can also form blowholes in castings, where like hydrogen, element of nitrogen substantially decreases the ductility of steel. Nitrogen in Stainless Steel 310S Ferrule Tube Fittings does not move into and out of liquid steel as easily as hydrogen, but it is well absorbed by liquid steel in the high – temperature zones of an electric arc or oxygen jet, where nitrogen molecules (N2) are broken up into atoms (N).
These Stainless Steel 310 Double Ferrule Tube Fittings takes place in containers lined with basic refractories. Our SS 310S Tube Fittings may be bricks or ram material made of highly stable oxides, such as magnetite, alumina, or the double oxides chrome – magnetite and dolomite. These SS 310 Compression Fitting is desirable that the refractories not participate in the steelmaking reactions, but unfortunately they do erode and corrode.
|
Stainless Steel 310/310S Tube to Male Fittings Specifications
|
||
| Specifications | : | ASTM A276 ASME SA 479 |
| Tube Size | : | 6mm to 38mm to 1/4″ to 1 1/2″ |
| Thread |
: | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
| Brass | : | ASTM B16 ASTM B 453 |
| Pressure Rating | : | 6000PSI for Stainless Steel, 300/1000/3000PSI for Brass |
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
| SS 310 | 0.015 max | 2 max | 0.015 max | 0.020 max | 0.015 max | 24.00 – 26.00 | 0.10 max | 19.00 – 21.00 | 54.7 min |
| SS 310S | 0.08 max | 2 max | 1.00 max | 0.045 max | 0.030 max | 24.00 – 26.00 | 0.75 max | 19.00 – 21.00 | 53.095 min |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 7.9 g/cm3 | 1402 °C (2555 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 40 % |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 310 | 1.4841 | S31000 | SUS 310 | 310S24 | 20Ch25N20S2 | – | X15CrNi25-20 |
| SS 310S | 1.4845 | S31008 | SUS 310S | 310S16 | 20Ch23N18 | – | X8CrNi25-21 |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
About Us:
Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.
Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide. We export our high-quality fasteners in Saudi Arabia, Oman, UAE, Dubai, Kuwait, Qatar, Mexico, USA, Malaysia, Iran and many other countries.
Contact:
D-2, Office no. 3,
Gr. Floor, Bharat Nagar Society,
Grant Road (E), Mumbai - 400007
Tel: +91 9769056007
Email: [email protected]
For More Information Visit Our Website : Sachiya Steel International
Sachiya Steel International is one of the pioneer Manufacture and Exporter for Stainless Steel 310 Tube to Female Pipes, which are either placed into the ladle before tapping or are injected into the tapping stream.
The carrying out of metallurgical reactions in Stainless Steel 310 Tube Fittings is a common practice in practically all steelmaking shops, because it is cost – efficient to operate the primary furnace as a high – speed melted and to adjust the final chemical composition and temperature of the steel after tapping.Also, certain metallurgical reactions in Stainless Steel 310S Compression Tube Fittings, for reasons of equipment design and operation, are more efficiently performed in the ladle.
The simplest form of treatment in Stainless Steel 310 Female Fittings takes place when the mixing effect of the tapping stream is used to add deoxidizers, slag formers, and small amounts of alloying agents.Stainless Steel 310 Tube to Female Pipes | Stainless Steel 310 Tube to Female Pipes | Stainless Steel 310 Tube to Female Pipes | Stainless Steel 310 Tube to Female Pipes | Stainless Steel 310 Tube to Female Pipes | Stainless Steel 310 Tube to Female Pipes | Stainless Steel 310 Tube to Female Pipes | Stainless Steel 310 Tube to Female PipesDe – oxidation reactions carried out in Stainless Steel 310S Ferrule Tube Fittings are exothermic and thus raise the temperature of the liquid steel.
Stainless Steel 310 Double Ferrule Tube Fittings also loses heat by radiation from the top surface, by heating of the ladle lining, and by heat flux through the lining and shell.
Temperature in these SS 310S Female Tube Fittings drops that take place when just holding the steel can range from 0.3 Degree C to 2 Degree C per minute.Stainless Steel 310S Tube to Female Pipes SpecificationsSpecifications:ASTM A276 ASME SA 479Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Stainless Steel, 300/1000/3000PSI for Brass 310 Stainless Steel Tube to Female Pipes Fitting Chemical Composition GradeCMnSiPSCrMoNiN310min.–––––24.0–19.0–max.0.252.01.500.0450.03026.022.0– Stainless Steel 310 – 310S Tube to Female Pipes Fitting Mechanical Properties GradeTensile Strength (MPa) minYield Strength 0.2% Proof (MPa) minElongation (% in 50mm) minHardnessRockwell B (HR B) maxBrinell (HB) max310 – 310S5152054095217 Stainless Steel 310 – 310S Tube to Female Pipes Fitting Physical Properties GradeDensity (kg/m3)Elastic Modulus (GPa)Mean Coefficient of Thermal Expansion (m/m/0C)Thermal Conductivity (W/m.K)Specific Heat 0-1000C (J/kg.K)Electrical Resistivity (n.m)0-1000C0-3150C0-5380Cat 1000Cat 5000C310 – 310S775020015.916.217.014.218.7500720 Equivalent Grades for 310 – 310S Stainless Steel Tube to Female Pipes Fitting GradeUNS NoOld BritishEuronormSwedish SSJapanese JISBSEnNoName310 – 310SS31000/S31008––1.4841/1.4845––SUS 310 – 310S SS 310/310S Tube to Female Pipes Application Industries Off-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper Industry
Sachiya Steel International is one of the Leading Manufacture And Exporter for Stainless Steel 310 Tube to Union Fittings, which plants supply in coils or sheets, where the latter being cut on special shear lines.
Stainless Steel 310 Tube Fittings are available in a great variety of surface conditions, often with a specific roughness, electrolytically cleaned, chemically treated, oiled, or coated with metals such as zinc, tin, chromium, and aluminum or with organic substances.
Stainless Steel 310S Compression Fittings are usually produced to strict dimensional tolerances in order to assure efficient performance in the highly demanding operations of automated consumer – products industries.In practice, Stainless Steel 310 Union Fittings are not precisely distinguished by these dimensions, and there is considerable overlap in the use of the two terms.
In principle, Stainless Steel 310S Ferrule Fittings is a melting, purifying, and alloying process carried out at approximately 1,600 Degree C (2,900 Degree F) in molten conditions.
Various chemical reactions are initiated in Stainless Steel 310 Double Ferrule Fittings, either in sequence or simultaneously, in order to arrive at specified chemical compositions and temperatures.Stainless Steel 310 Tube to Union Fittings | Stainless Steel 310 Tube to Union Fittings | Stainless Steel 310 Tube to Union Fittings | Stainless Steel 310 Tube to Union Fittings | Stainless Steel 310 Tube to Union Fittings | Stainless Steel 310 Tube to Union Fittings | Stainless Steel 310 Tube to Union Fittings Indeed, many of the reactions interfere with one another in 310S Stainless Steel Tube Fittings, requiring the use of process models to help in analyzing options, optimizing competing reactions, and designing efficient commercial practices.
These 310S Stainless Steel Tube Fittings are offered at best possible rates to our customers.Stainless Steel 310 / 310S Tube to Union SpecificationsSpecifications:ASTM A276 ASME SA 479Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Stainless Steel, 300/1000/3000PSI for BrassSS 310 / 310S Tube To Union Chemical CompositionGradeCMnSiPSCrMoNiNSS 3100.015 max2 max0.015 max0.020 max0.015 max24.00 – 26.000.10 max19.00 – 21.0054.7 minSS 310S0.08 max2 max1.00 max0.045 max0.030 max24.00 – 26.000.75 max19.00 – 21.0053.095 minStainless Steel 310 / 310S Tube To Union Mechanical PropertiesDensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation7.9 g/cm31402 °C (2555 °F)Psi – 75000 , MPa – 515Psi – 30000 , MPa – 20540 %Equivalent Grades for 310 / 310S Stainless Steel Ferrule Fitting Tube To UnionSTANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENSS 3101.4841S31000SUS 310310S2420Ch25N20S2–X15CrNi25-20SS 310S1.4845S31008SUS 310S310S1620Ch23N18–X8CrNi25-21 SS 310 / 310S Tube To Union Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper Industry
Sachiya Steel International is one of the Leading Manufacture And Exporter for Stainless Steel 310 Tube to Male Fittings, which is the absorption and removal of the two gases hydrogen and nitrogen.
Hydrogen can enter liquid in these Stainless Steel 310 Tube Fittings from moist air, damp refractories, and wet flux and alloy additions.
Our Stainless Steel 310S Compression Fittings causes brittleness of solidified steel — especially in large pieces, such as heavy forgings, that do not permit the gas to diffuse to the surface.
Hydrogen in these Stainless Steel 310 Male Connector Fittings can also form blowholes in castings, where like hydrogen, element of nitrogen substantially decreases the ductility of steel.Nitrogen in Stainless Steel 310S Ferrule Tube Fittings does not move into and out of liquid steel as easily as hydrogen, but it is well absorbed by liquid steel in the high – temperature zones of an electric arc or oxygen jet, where nitrogen molecules (N2) are broken up into atoms (N).
These Stainless Steel 310 Double Ferrule Tube Fittings takes place in containers lined with basic refractories.Stainless Steel 310 Tube to Male Fittings | Stainless Steel 310 Tube to Male Fittings | Stainless Steel 310 Tube to Male Fittings | Stainless Steel 310 Tube to Male Fittings | Stainless Steel 310 Tube to Male Fittings | Stainless Steel 310 Tube to Male Fittings | Stainless Steel 310 Tube to Male FittingsOur SS 310S Tube Fittings may be bricks or ram material made of highly stable oxides, such as magnetite, alumina, or the double oxides chrome – magnetite and dolomite.
These SS 310 Compression Fittings is desirable that the refractories not participate in the steelmaking reactions, but unfortunately they do erode and corrode.
