Sachiya Steel International is one the leading manufacturer and exporter of Monel K500 Threaded Forged Fittings, where our expert professionals make use of excellent quality material in the production process. Typical applications for our Monel K500 Forged Threaded Elbow (UNS N05500) are pump shafts and impellers; doctor blades and scrapers; oil – well drill collars and instruments; electronic components; springs; and valve trim. These Monel K500 Forged Threaded Tee is a nickel – copper alloy, precipitation harden able through additions of aluminum and titanium. Our Monel K500 Forged Threaded Cross has approximately three times the yield strength and double the tensile strength when compared with Monel 400 Forged Threaded Cross Fittings.
These Monel K500 Forged Threaded Cap also has excellent corrosion resistance together with increased strength and hardness of that of Alloy 400. Meanwhile, our Monel K500 Forged Threaded Fittings are also being offered in different sizes and shapes to our customers. These Monel K500 Forged Threaded Coupling can be readily joined and fabricated, which further has excellent mechanical properties at subzero temperatures.
Monel K500 Threaded Forged Fittings | Monel K500 Threaded Forged Fittings | Monel K500 Threaded Forged Fittings | Monel K500 Threaded Forged Fittings | Monel K500 Threaded Forged Fittings | Monel K500 Threaded Forged Fittings | Monel K500 Threaded Forged Fittings | Monel K500 Threaded Forged Fittings
By proper control of the amount of hot or cold work and by the selection of appropriate thermal treatments, finished fabrications in our Monel K500 Forged Threaded Union can be produced to a rather wide range of mechanical properties. These Monel K500 Forged Threaded Bushing is used in the section of Alkylation units in direct contact with concentrated hydrofluoric acid.
Monel K500 Threaded Fittings Specifications |
||
| Specifications | : | ASTM B564 & ASME B564 |
| Size | : | 1/8” NB to 4” NB (Socket weld & Screwed-Threaded) |
| Standards | : | ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
| Class | : | 2000 LBS, 3000 LBS, K5000 LBS, 9000 LBS |
| Type | : | Threaded Fittings |
Monel K500 Forged Threaded Fittings Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni |
| K500 | 0.25 max | 1.5 max | 0.5 max | 0.010 max | 27.00 – 33.00 | 0.5 – 2 | 63.00 min |
Monel K500 Threaded Fitting Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| K500 | 8.44 g/cm3 | 1350 °C (2460 °F) | Psi – 160000 , MPa – 1100 | Psi – 115000 , MPa – 790 | 20 % |
Equivalent Grades for K500 Monel Forged Threaded Fittings
| STANDARD | WERKSTOFF NR. | UNS |
| Monel K500 | 2.4375 | N05500 |
Monel K500 Forged Threaded Fittings Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
About Us:
Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.
Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide. We export our high-quality fasteners in Saudi Arabia, Oman, UAE, Dubai, Kuwait, Qatar, Mexico, USA, Malaysia, Iran and many other countries.
Email: [email protected]
For More Information Visit Our Website : Sachiya Steel International
Sachiya Steel International offers a wide range of Monel Alloy K500 Threaded Forged Fittings , where our expert professionals make use of excellent quality material in the production process.
Typical applications for our Monel K500 Forged Threaded Elbow (UNS N05500) are pump shafts and impellers; doctor blades and scrapers; oil – well drill collars and instruments; electronic components; springs; and valve trim.
These Monel K500 Forged Threaded Tee is a nickel – copper alloy, precipitation harden able through additions of aluminum and titanium.Our Monel K500 Forged Threaded Cross has approximately three times the yield strength and double the tensile strength when compared with Monel 400 Forged Threaded Cross Fittings.
These Monel K500 Forged Threaded Cap also has excellent corrosion resistance together with increased strength and hardness of that of Alloy 400.
Meanwhile, our Monel K500 Forged Threaded Fittings are also being offered in different sizes and shapes to our customers.
These Monel K500 Forged Threaded Coupling can be readily joined and fabricated, which further has excellent mechanical properties at subzero temperatures.Monel Alloy K500 Threaded Forged Fittings | Monel Alloy K500 Threaded Forged Fittings | Monel Alloy K500 Threaded Forged Fittings | Monel Alloy K500 Threaded Forged Fittings | Monel Alloy K500 Threaded Forged Fittings | Monel Alloy K500 Threaded Forged Fittings | Monel Alloy K500 Threaded Forged FittingsBy proper control of the amount of hot or cold work and by the selection of appropriate thermal treatments, finished fabrications in our Monel K500 Forged Threaded Union can be produced to a rather wide range of mechanical properties.
Sachiya Steel International is one of the leading Manufacturer and Exporter of Monel K500 Tube to Male Fittings, which are mass – produced under the management of our knowledgeable specialists.
The finest machinability for this Monel K500 Tube Fittings is in the annealed form.
The corrosion resistance of Monel K500 Compression Fittings is considerably corresponding to that of alloy K500, apart from that, when in the age – hard-bitten form, it has a superior propensity to SCC in some atmospheres.
Monel K500 Male Connector Fittings is generally used in Chemical Process Industry: such as in procedures connecting organic acids, dry chlorine and caustic soda, manufacture of chlorinated plastics, and so on.Monel K500 Ferrule Fittings (UNS N05500) has resistant to a sour – gas atmosphere.
Meanwhile, these Monel K500 Double Ferrule Fittings are also being offered in different sizes and shapes to our customers.
The high chromium content gives Alloy K500 Tube Fittings excellent resistance to aqueous corrosion by oxidizing acids (especially nitric acid) and salts and to suffixation at high – temperatures.
Sachiya Steel International is one of the leading manufacturer and exporter of Monel K500 Tube to Male Fittings, which are mass – produced under the management of our knowledgeable specialists.
The finest machinability for this Monel K500 Tube Fittings is in the annealed form.
The corrosion resistance of Monel K500 Compression Fittings is considerably corresponding to that of alloy K500, apart from that, when in the age – hard-bitten form, it has a superior propensity to SCC in some atmospheres.
Monel K500 Male Connector Fittings is generally used in Chemical Process Industry: such as in procedures connecting organic acids, dry chlorine and caustic soda, manufacture of chlorinated plastics, and so on.Monel K500 Ferrule Fittings (UNS N05500) has resistant to a sour – gas atmosphere.
Meanwhile, these Monel K500 Double Ferrule Fittings are also being offered in different sizes and shapes to our customers.
The high chromium content gives Alloy K500 Tube Fittings excellent resistance to aqueous corrosion by oxidizing acids (especially nitric acid) and salts and to suffixation at high – temperatures.Monel K500 Tube to Male Fittings | Monel K500 Tube to Male Fittings | Monel K500 Tube to Male Fittings | Monel K500 Tube to Male Fittings | Monel K500 Tube to Male Fittings | Monel K500 Tube to Male Fittings |Monel K500 Tube to Male Fittings | Monel K500 Tube to Male FittingsAlloy K500 Compression Fittings has a superior stress cracking resistance than Monel K500 in steam generation nuclear reactors for piping, separators and weldments.
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Brass Threaded Forged Fittings, where the 18 % minimum chromium content provides corrosion and oxidation resistance.
These Brass Threaded Forged Elbow Fittings must contain at least 10.5 percent chromium, which has the innate ability to form a passive layer that prevents corrosion these Brass Threaded Forged Tee Fittings may contain much higher chromium levels, and additional alloying ingredients like molybdenum, nickel, aluminum, copper, titanium, nitrogen, selenium and phosphorous.These Brass Threaded Forged Cross Fittings is an economical and practical choice for most environments, but it does not have the chloride resistance of SS 316.
These Brass Threaded Forged Cap Fittings is the most common form of stainless steel used around the world, largely due to its excellent corrosion resistance and value.
These Brass Threaded Forged Coupling Fittings contains between 16 percent and 24 percent chromium and up to 35 percent nickel — as well as small amounts of carbon and manganese.Brass Threaded Forged Fittings | Brass Threaded Forged Fittings | Brass Threaded Forged Fittings | Brass Threaded Forged Fittings | Brass Threaded Forged Fittings | Brass Threaded Forged Fittings | Brass Threaded Forged Fittings | Brass Threaded Forged Fittings | Brass Threaded Forged Fittings | Brass Threaded Forged FittingsThe slightly higher price point of these Brass Threaded Forged Bend Fittings is well worth it in areas with high chloride exposure, especially the coast and heavily salted roadways.
The durability makes these Brass Threaded Forged Union Fittings easy to sanitize, and therefore ideal for kitchen and food applications.
These Brass Threaded Forged Plug Fittings is also common in buildings, décor, and site furnishings.Brass Threaded Fittings SpecificationsSpecifications:ASTM B62 & ASME B62Size:1/8” NB to 4” NB (Socket weld & Screwed-Threaded)Standards:ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799Class:2000 LBS, 3000 LBS, 6000 LBS, 9000 LBSType:Threaded FittingsBrass Tube to Male Pipes Fitting Chemical CompositionBrassCuFePbZnMin./Max.60.0-63.00.352.5-3.0Rem.Nominal61.5–2.735.4Brass Tube to Male Pipes Fitting Physical PropertiesPropertiesUS CustomaryMelting Point -Liquidus1650 FMelting Point -Solidus1630 FDensity0.307 lb/in3at 68 FElectrical Resistivity39.90 ohms – cmil/ft @ 68 FElectrical Conductivity26 %IACS @ 68 FThermal Conductivity67 Btu · ft/(hr · ft2·oF)at 68FModulas of Elasticity in Tension14000 ksi Brass Forged Threaded Fittings Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
