Sachiya Steel International is one of the Leading Manufacturer And Exporters of Stainless Steel 347H Threaded Forged Fittings, which has high corrosion resistance in chloride-containing media, including seawater. Our Stainless Steel 347H Forged Threaded Elbow is machinability–improved version and is well suited for use in, for example, organic acids. These Stainless Steel 347H Forged Threaded Tee offers excellent and consistent machining properties for increased cutting speeds, reduced tool wear, and set–up times. Our Stainless Steel 347H Forged Threaded Cross is exposed for prolonged periods to temperatures exceeding 300 Degree C (570 Degree F).
The microstructure of these Stainless Steel 347H Forged Threaded Cap changes which result in a reduction in impact strength, where this effect does not necessarily affect the behavior of the material at the operating temperature. Our Stainless Steel 347H Forged Threaded Fittings has a far lower coefficient of thermal expansion than austenitic alloys and can therefore possess certain design advantages. In terms of resistance to general corrosion, these Stainless Steel 347H Forged Threaded Coupling is comparable or superior alloys in most media.
Stainless Steel 347H Threaded Forged Fittings | Stainless Steel 347H Threaded Forged Fittings | Stainless Steel 347H Threaded Forged Fittings | Stainless Steel 347H Threaded Forged Fittings | Stainless Steel 347H Threaded Forged Fittings | Stainless Steel 347H Threaded Forged Fittings | Stainless Steel 347H Threaded Forged Fittings
Compared to our Stainless Steel 347H Forged Threaded Union, which does not contain molybdenum, it is clearly far superior. This Stainless Steel 347H Forged Threaded Bushing is confirmed by potential measurements of the critical temperature for the initiation of pitting corrosion (CPT) performed in chloride–bearing aqueous solutions.
|
Stainless Steel 347H Forged Threaded Fittings Specifications
|
||
| Specifications | : | ASTM A182 & ASME SA182 |
| Size | : | 1/8” NB to 4” NB (Socket weld & Screwed-Threaded) |
| Standards |
: | ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
| Class | : | 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS |
| Type | : | Threaded Fittings |
| Grade | C | Mn | Si | P | S | Cr | Cb | Ni | Fe |
| SS 347H | 0.10 max | 2 max | 1.00 max | 0.045 max | 0.030 max | 17.00 – 19.00 | 8xC – 1.10 | 9.00 – 13.00 | 63.72 min |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.0 g/cm3 | 1454 °C (2650 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 347H | 1.4961 | S34709 | SUS 347H | – | – | – | X6CrNiNb18-12 |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
About Us:
Sachiya Steel International are manufacturers & exporters of Pipes, Tubes, Pipe Fitting, Fasteners.
Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide. We export our high-quality fasteners in Saudi Arabia, Oman, UAE, Dubai, Kuwait, Qatar, Mexico, the USA, Malaysia, Iran, and many other countries.
Email: [email protected]
For More Information Visit Our Website: Steel Tube
Sachiya Steel International is one of the Leading Manufacture And Exporter of Stainless Steel 347H Forged Threaded Fittings, which has high corrosion resistance in chloride containing media, including seawater.
Our Stainless Steel 347H Forged Threaded Elbow is a machinability – improved version and is well suited for use in, for example, organic acids.
These Stainless Steel 347H Forged Threaded Tee offers excellent and consistent machining properties for increased cutting speeds, reduced tool wear and set – up times.Our Stainless Steel 347H Forged Threaded Cross is exposed for prolonged periods to temperatures exceeding 300 Degree C (570 Degree F).
The microstructure of these Stainless Steel 347H Forged Threaded Cap changes which results in a reduction in impact strength, where this effect does not necessarily affect the behavior of the material at the operating temperature.Stainless Steel 347H Forged Threaded Fittings | Stainless Steel 347H Forged Threaded Fittings | Stainless Steel 347H Forged Threaded Fittings | Stainless Steel 347H Forged Threaded Fittings Our Stainless Steel 347H Forged Threaded Fittings has a far lower coefficient of thermal expansion than austenitic alloys and can therefore possess certain design advantages.
In terms of resistance to general corrosion, these Stainless Steel 347H Forged Threaded Coupling is comparable or superior alloys in most media.
Compared to our Stainless Steel 347H Forged Threaded Union, which does not contain molybdenum, it is clearly far superior.
Sachiya Steel International is one of the Leading Manufacture and Exporter of Stainless Steel 317L Threaded Forged Fittings, which show a much smaller rate of abrasion volume loss with increase in abrasion velocity than the austenitic steels.
Stainless Steel 317L Forged Threaded Elbow derive their outstanding properties from their capacity to resist unstable fracture of micro shear lips on the abraded surface.
This is due to the strain capacity in Stainless Steel 317L Forged Threaded Tee afforded by the mechanical inducement of the martensitic phase transformations and the high work – hardening characteristics of the transformation product.The influence of this transformation has been studied as a function of prior cold work and velocity of abrasion on a range of austenitic Stainless Steel 317L Forged Threaded Cross.
Notwithstanding these advantages of the austenitic grades, Stainless Steel 317L Forged Threaded Cap are superior in terms of cost per unit volume lost and the new ferritic – martensitic steel designated has potential as an abrasion resisting material in corrosive environments.Stainless Steel 317L Threaded Forged Fittings | Stainless Steel 317L Threaded Forged Fittings | Stainless Steel 317L Threaded Forged Fittings | Stainless Steel 317L Threaded Forged Fittings | Stainless Steel 317L Threaded Forged Fittings | Stainless Steel 317L Threaded Forged Fittings | Stainless Steel 317L Threaded Forged Fittings Complex design requirements can make Stainless Steel 317L Forged Threaded fittings necessary to combine different metallic materials within the same component.
Also, chance combinations can often be found in Stainless Steel 317L Forged Threaded Coupling, governed only by the availability of, for instance, fasteners or shims.
In certain circumstances, such mixed – material designs of Stainless Steel 317L Forged Threaded Union can lead to corrosion in one of the partner materials.
Sachiya Steel International is one of the Leading Manufacturer And Exporters of Stainless Steel 304L Threaded Forged Fittings, which can be easily welded and processed by standard shop fabrication practices.
The austenitic structure of Stainless Steel 304L Threaded Forged Elbow also gives this grade excellent toughness, even down to cryogenic temperatures.
Stainless Steel 304L Threaded Forged Tee does not perform well in more highly reducing environments such as those containing chlorides and sulphuric acid.Stainless Steel 304L Threaded Forged Cross Performs well in freshwater service with low levels of chlorides, whereas at higher chloride levels the grade is susceptible to crevice corrosion and pitting.
Working temperatures of 1652 Degree F – 2102 Degree F (750 Degree C – 1150 Degree C) in Stainless Steel 304L Threaded Forged Cap are recommended for most hot working processes.
The best machining results in Stainless Steel 304L Threaded Forged Fittings are achieved with slower speeds, heavier feeds, excellent lubrication, sharp tooling and powerful rigid equipment.Stainless Steel 304L Threaded Forged Fittings | Stainless Steel 304L Threaded Forged Fittings | Stainless Steel 304L Threaded Forged Fittings | Stainless Steel 304L Threaded Forged Fittings | Stainless Steel 304L Threaded Forged Fittings | Stainless Steel 304L Threaded Forged Fittings | Stainless Steel 304L Threaded Forged Fittings For maximum corrosion resistance, Stainless Steel 304L Threaded Forged Coupling should be annealed at 1900 Degree F (1038 Degree C) minimum and water quenched or rapidly cooled by other means after hot working.
Stainless Steel 304L Threaded Forged Union is not suitable for use with sulphide, nitric acid, acid chromates, or oxidizing salts such as ferric chloride.
Sachiya Steel International is one of the well-known Manufacture and exporter for high quality Stainless Steel 310 Threaded Forged Fittings, which are reduced to iron, also called hot metal or pig iron.
After casting and rolling, Stainless Steel 310 Forged Threaded Elbow is delivered as coil, plate, sections or bars.
Stainless Steel 310S Forged Threaded Tee made in fine quality uses electricity to melt recycled steel.
Additives, such as Stainless Steel 310 Forged Threaded Cross are used to adjust to the desired chemical composition.Electrical energy in Stainless Steel 310S Forged Threaded Cap can be supplemented with oxygen injected into the EAF.
Another steelmaking technology, the open hearth furnace (OHF), makes up about 0.4 % of Stainless Steel 310 Forged Threaded production.
The OHF process of Stainless Steel 310S Forged Threaded Coupling is very energy intensive and is in decline owing to its environmental and economic disadvantages.
