Initial Cleaning
Generally, while shipping many parts of the Pitco fryer are coated with oil for protection. So, you should clean it before starting the cooking. If you clean it, oil coating will be removed and removes any foreign particles that are accumulated during shipment or storage. You can follow the cleaning process as below given.
Fill the tank with water and add a mild detergent or one packet of Pitco fryer cleaner.
Turn on your fryer and set the thermostat temperature to 200 degrees Fahrenheit. Leave the unit for 15 minutes to heat. Make sure the water level is not below the oil level mark on the back of the fry tank.
With a fryer cleaning brush, you have to scrub the interior for removing the protective coating.
After completion of fryer cleaning, turn off the main burners and turn the gas valve knob to the "Pilot" position.
Now, drain the water from tank to a container that is suitable for hot water.
When the fryer's tank is cooled, rinse it thoroughly with cool water. You need to continue to rinse it until the cleaner is removed completely from the tank.
Wipeout all water with a clean dry cloth. You should wipe out the water thoroughly as any residual water causes hot oil to splatter out of the unit.
Note: Mild steel tanks must be wiped down or coated with oil to keep the tank free from rusting.
Now, the tank is clean and you are ready to fill and operate your fryer.
Daily Cleaning
If you have done this procedure daily, your Pitco fryer will run effectively and give peak performance for years to come.
Wipe down the exterior fryer: With a clean soft or microfiber cloth, you need to wipe up shortening that spills onto the exterior surfaces of the Pitco fryer. Better to do this when the oil is warm.
To clean unit surfaces, use a mix of warm water and mild detergent. Make sure not to get water in the shortening. Rinse the fryer completely and dry thoroughly before use.
Use a non-abrasive scouring powder or pad to clean stains if you find stains from grease or other food remnants.
Weekly Cleaning - How to Boil Out a Pitco Fryer?
The Pitco fryer has to be cleaned once a week. This is the right time if you want to replace the filter paper. The cleaning includes complete draining of the fryer and boils out.
You will need a large container to hold the volume of the tank. This container should also be able to withstand boiling water temperatures. When the oil is replaced by water or heating portion cleaning is completed, you have to shut off the fryer completely. This will prevent the heating system from coming on during the oil draining and water filling procedure.
You have to drain the oil from the fryer and discard it. You can also reuse it. Remove tube rack or mesh tube screens and remove any debris from the bottom of the fry tank. Clean them. Once the cleaning is completed, return mesh screens and tube racks to the fry tank. Close the drain valve and fill the tank with a mixture of non-caustic detergent and water. You can use cleaner for best results.
Restart the fryer. When the temperature of unit gets 100 degrees centigrade, it will go to "Boil" mode and bring the water to a slow boil. Once the water is at a slow boil, turn off the unit.
Soak the fryer for 20 minutes to soften shortening deposits and carbon. By using a fryer brush, remove any residue from heating tubes, tank, and sidewalls. You need to perform standard daily cleaning after scrubbing the tank.
Remove the filter from the unit. Next, slide a container to catch the water under the fryer so that the pipe which is normally aimed into the filter pan is aimed into the container and open the drain valve.
Drain the hot water to the taken container and rinse the fry tank with clean warm water.
Wipe the fry tank dry with a clean cloth. After that, close the drain valve and remove the container. Now, refill the tank.
Puri Aanand vilas is a near to possession Apartments Society in Sector 81, Greater Faridabad with 4 different types such as 3 Bhk, 3+1 Bhk, 4 Bhk, 4+1 Bhk.
Puri Aanandvilas available in resale.
Balaji Art Gallery is one of the pioneers in the field of Tanjore Painting Manufactures of First Quality Jaipur Colour stones, White stones, 24 cr, Pure Gold foil, and materials like mukk Board Tamarind sead Skin ‘Mayil Thutham’ for the past 30 years which is located in Chennai.
They are having paintings in the range from a size of 4/3 inch and 8/4 feet to large hall paintings.
Tanjore paintings and glass paintings and the prices are cheaper than other sellers.Visit - Balaji Tanjore Art Gallery and Tanjore paintings for more Details.
Let's start reading a few problems and tips to solve the problems of Star Mfg deep fryer.Star Deep Fryer Troubleshooting GuideFind the simple solutions to fix the basic Star fryer problemsDeep Fryer Pilot Won’t Light/ Pilot Light is OutIf the fryer's deep pilot light is out, you can consider that your unit is completely out of condition.
But, mainly due to the main gas supply valve issue, this problem will occur.Check the supply line for any blockages, this is the best choice to confirm that problem is with the gas supply valve.
While inspecting, if you observe that the supply valve is open and clog-free, then you have to replace the thermopile.
The thermopile works as a main heating element in the fryer that converts thermal heat into electric energy.
Therefore, signaling the pilot light to ignite the flame.
If you are unable to replace it, contact a professional.Thermostat FailureIf you are seeing temperature fluctuations when using the Star Mfg deep fryer, it might because of a defective thermostat.
Mahabaleshwar is a small town situated in Maharashtra, a hill station in the Western Ghats range of India.
It features many viewpoints such as Arthur’s seat, centuries old Pratapgad Fort and wonderfullLingmala waterfall, you can go with a boat ride in Venna lake where 5 rivers meet at Panch Ganga Temple to north.
Find affordable Stay in Mahabaleshwar: The city is comprised of temples, dense forest, waterfalls, river, hill valleys which give a charming view.
You will get 4 star hotels in Mahabaleshwar which are perfectly designed and well decorated.
The staff of every hotel from this place are very well mannered and soft spoken.
They always keep an eye on their customer’s satisfaction.You also Book a Luxury resort in Mahabaleshwar, which you can get at different rates.
