Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High-Quality Inconel 601 Nipple, which has good aqueous corrosion resistance due to the high nickel content in combination with chromium. Inconel 601 Hexagon Reducing Nipple is used in chemical processing equipment and petrochemical processing equipment where its excellent corrosion resistance comes into full play. This is possible due to Inconel 601 Hexagon Nipple having a tightly adherent oxide layer that is resistant against spalling. Alloy 601 One End Threaded Nipple has outstanding oxidation resistance to 2200 Degree F and resists spalling even under severe thermal cycling conditions.
Phone No: +91 9769056007
Email id: [email protected]
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Inconel 601 Flanges, which has some great features such as fine finishing, corrosion resistant, easy to fit and more.
Inconel 601 Slip On Raised Flanges (UNS N06601) are used in Radiant tubes, Strand annealing tubes, Steam super-heater tube supports, and more.
Some of the great properties that draw users to Inconel 601 Threaded Flanges include: good aqueous corrosion resistance, outstanding mechanical strength, and more.
Inconel 601 Weld Neck Raised Flanges is formed using all conventional techniques.For maximum oxidation resistance, Inconel 601 Blind Flanges should be welded with matching composition 601 alloy GTAW wire.
Inconel 601 Socket Weld Flanges develops a tightly adherent oxide scale which resists spalling even under conditions of severe thermal cycling.
Inconel 601 Ring Joint Type Flanges is often used in thermal processing equipment – fixtures, baskets, trays, radiant tubes, flame shields, muffles, retorts, woven wire conveyers, electrical resistance heating wires and burner nozzles.
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Inconel 601 Round Bars, which is a Nickel – Chromium alloy that offers good heat and corrosion resistance.
The weld fillers developed for RA 602 can also provide a weld which is stronger and more oxidation resistant than Inconel 601 Square Bars base metal.
Inconel 601 Flat Bars is a solid solution nickel chromium alloy for high temperature heat resistance.
Inconel 601 Threaded Bars is either annealed at around 2000 Degree F or solution treated at around 2100 Degree F, both followed by air cooling.Chemical – processing applications for Inconel 601 Hollow Bars include process heaters, condenser tubes in sour – water strippers, and insulating cans in ammonia reformers.
Thanks to this unique composition, Inconel 601 Hexagonal Bars is popular in a number of major global industries including: Pollution control, Power generation and Aerospace.
Inconel 601 Triangular Bars is a Nickel – Chromium – iron corrosion and heat resistant alloy, which is often used for insulating cans in ammonia reformers and catalyst support grids used in nitric acid production.Inconel 601 Round Bars | Inconel 601 Round Bars | Inconel 601 Round Bars | Inconel 601 Round Bars | Inconel 601 Round Bars | Inconel 601 Round Bars | Inconel 601 Round Bars | Inconel 601 Round BarsHigh – speed operations such as grinding, turning or milling, are performed in Inconel 601 Bars using water – based coolants.
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Inconel 601 Threaded Forged Fittings, which are extensively demanded in residential, commercial and industrial sectors.
These Inconel 601 Forged Threaded Elbow (UNS N06601) are used in gas-turbine components and others.
Inconel 601 Forged Threaded Tee Fittings is perfect for applications that demand resistance to heat and corrosion.
Heavy lubricants in these Inconel 601 Forged Threaded Cross are used for tapping, drilling, boring, or broaching.
Inconel 601 Forged Threaded Cap is not suggested for use in strongly reducing, sulfur bearing environments.
These Inconel 601 Forged Threaded Fittings has highly resistant to oxidation through 2200 Degree F.Inconel 601 Forged Threaded Coupling has high mechanical strength, and is readily formed, machined, and welded.
Sachiya Steel International is one of the leading Manufacturer And Exporter of Inconel 601 Pipe Fittings, which may be welded by all commercial methods and does not respond to heat treatment.
The properties of these Inconel 601 Compression Pipe Fittings make it a material of broad utility in such fields as thermal processing, pollution control, chemical processing, aerospace, power generation and so on.
Inconel 601 Compression Fittings range in jet engines such as: Combustion – can liners, Diffuser assembles, Containment rings in gas turbines, and Jet – engine igniters.These Inconel 601 Ferrule Pipe Fittings is often used in Thermocouple protection tubes, Verification of nuclear waste, Nuclear waste transport tank lining, Rotary kilns and calciners.
Inconel 601 Double Ferrule Pipe Fittings has outstanding resistance to high temperature oxidation, where Annealed Heat Treatment can be conducted up to 2100 Degree F (1150 Degree C).
In the power – generation field, these Alloy 601 Compression Fittings is used for super – heater tube supports, ash – handling systems, and grid barriers.Inconel 601 Pipe Fittings | Inconel 601 Pipe Fittings | Inconel 601 Pipe Fittings | Inconel 601 Pipe Fittings | Inconel 601 Pipe Fittings | Inconel 601 Pipe Fittings | Inconel 601 Pipe FittingsAlloy 601 Compression Pipe Fittings is more difficult to machine than stainless steel 304, which is also used for igniters and diffuser assembles in gas turbines for aerospace applications.
The oxidation of these Alloy 601 Ferrule Pipe Fittings was performed in air, in the temperature range 1000 Degree C – 1150 Degree C, during 90 h, where the kinetic results show that the parabolic behavior is always followed in this temperature rangeInconel 601 Pipe Fittings / Accessories SpecificationsSpecifications:ASTM B166 ASME SB 166Size:1/16″ – 2″Ends:Threaded, Welding, JICPressure Rating:1000 Psi, 3000 Psi, 6010 Psi, 10000 PsiThreads:NPT , BSPT, BSPPInconel 601 Pipe Fittings Chemical CompositionGradeCMnSiSCuFeNiCrInconel 6010.10 max1.00 max0.50 max0.015max1.00 maxBalance58.0 – 63.021.0 – 25.0Alloy 601 Accessories Mechanical PropertiesElementDensityMelting PointTensile StrengthYield Strength (0.2%Offset)ElongationInconel 6018.1 g/cm31411 °C (2571 °F)Psi – 80,000 , MPa – 550Psi – 30,000 , MPa – 20530 %Equivalent Grades for 601 Inconel Pipe FittingsSTANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENInconel 6012.4851N06601NCF 601NA 49XH60BTNC23FeANiCr23FeAlloy 601 Pipe Fittings / Accessories Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.