Cleaning a Top-Loading Washing Machine
The method of cleaning depends on the type of washing machine that you’re using. Top-loading washers are commonly used and are quite simple to clean up. You can use cleaning products available at home to clean your washing machine.
Also, you must make sure that the appliance runs properly. In case it doesn’t, you must hire a washing machine repair Dubai immediately. Now, here’s how you must proceed with cleaning a top-loading washer the right way:
Fill up the Drum with Hot Water
Using hot water will help you clean up the inside of your washing machine more effectively. So, you must always use hot water for cleaning the appliance. Now, you can fill up the drum with hot water simply by starting a hot wash cycle. In case you do that, stop the cycle when the drum fills up.
Apart from that, you can simply heat some water and pour it directly into the drum. After that, you need to proceed with adding the cleaner.
Add a Quart of a Cleaner
You can choose between various cleaners to proceed with this step. Regardless, you need to add a quart of the substance that you’re using. You can use chlorine bleach or white vinegar for this purpose. Apart from that, you can also find many viable special machine cleaners in the market.
So, add the one you prefer, and then run a wash cycle for a few seconds. This will mix the water properly with the cleaner. Apart from that, it will also unsettle the dirt and grime inside the drum.
Does your washer fail to run a cycle? Then, reach out to a reputable company that provides washing machine repair in Dubai immediately.
Run a Full Wash Cycle
You must wait for an hour after the previous step before you proceed with this one. And, that will make the cleaning more effective. So, run a full cycle on your washing machine to clean up the drum once you’re ready. This will clean up the drum as well as sanitise it.
Does the Machine Smell like Bleach?
Many people have reported getting the smell of bleach from their washer after performing this step. So, you might face this issue in case you’ve used bleach to clean the machine. In such a case, you need to go through the cleaning process again. So, fill up your washing machine with hot water again. But, this time, you must use vinegar instead of any other cleaner.
Clean Up the Dispensers
The dispensers are a crucial component of your washer that you must clean regularly. After all, you’ll often find dirt, debris, and hair deposited in the dispensers. You can clean them out easily using a scrubber. Also, you must use a vinegar solution as a cleaner for this task.
Cleaning a Front-Loading Washing Machine
The cleaning process for front-loading models is similar to that for top-loading ones. Here’s how you can proceed with it the simplest way:
Fill Hot Water in the Drum
First, you need to fill your washer with hot water. Does the model you’re using come with a self-cleaning functionality? In that case, you must opt for that setting and then fill the appliance with hot water. Otherwise, just pour hot water into it and proceed with the next step.
Add a Quart of Bleach Through the Dispenser
You must use a quart of bleach to clean front-loading washing machines for best results. Also, you must not pour it directly into the drum. Instead, pour it into the dispenser to mix it with the hot water. Then, let it run a full washing cycle to clean up and sanitise the drum.
Wipe the Dispensers
Once you’re done cleaning the drum, you must shift your attention to the dispensers. Make sure there aren’t any hair or debris stuck in them. You can use a sponge and vinegar solution to remove all the particles stuck in the dispensers.
Clean the Rubber Seal
You might also find debris on the rubber seal of your front-loading washer’s door. Moreover, you might often find mould growing on it as well. So, you might clean up the rubber seal regularly to prevent such issues. You can use a paper towel or sponge for this purpose. As for the cleaning product, you can use an all-purpose cleaner on the runner seal.
