Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High-Quality Stainless Steel 347H Angle, which is being available in different sizes and shapes to our clients. The addition of a small percentage of the alloying elements in Stainless Steel 347H Angle under consideration makes it possible to retard the transformation more effectively and hence to produce better physical properties. Stainless Steel 347H C-Channel of these types show only slightly better non – corrosive properties than straight carbon – steels, and the reason for their wide use is the high physical – properties that will be brought about by heat – treatment.
SACHIYA STEEL INTERNATIONAL
Contact us: +91 9769056007
Email us: [email protected]
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Stainless Steel 347H Flanges, which is a steel that has had small amounts of one or more alloying elements (other than carbon) such as such as manganese, silicon, nickel, titanium, copper, chromium and aluminum added.
Stainless Steel 347H Slip On Flanges are workhorses of industry because of their economic cost, wide availability, ease of processing, and good mechanical properties.
Stainless Steel 347H Threaded Flanges are generally more responsive to heat and mechanical treatments than carbon steels.The heat – treated Stainless Steel UNS S34709 Weld Neck Flanges is available in both Annealed and Normalized, which produces specific properties that are not found in regular carbon steel.
Stainless Steel 347H Socket Weld Flanges has been rolled at room temperature, below its recrystallization temperature, which increases its strength and hardness and decreases its ductility.
In addition to improvement of mechanical properties, cold rolling of Stainless Steel 347H Blind Flanges results in more control over the shape and dimensions of the finished product.Stainless Steel 347H Flanges | Stainless Steel 347H Flanges | Stainless Steel 347H Flanges | Stainless Steel 347H Flanges | Stainless Steel 347H Flanges | Stainless Steel 347H Flanges | Stainless Steel 347H FlangesStainless Steel 347H Lap Joint Flanges has an improved surface finish and tighter tolerances compared to hot roll steel.
Stainless Steel 347H Ring Joint Type Flanges is commonly used for parts requiring cold forming, such as crimping, swaging or bending.
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Stainless Steel 347H Round Bar, which are often quenched in water making them adapted for the production of parts with a simple form and not particularly difficult uses such as pivots and bushings.
In conditions, where the corrosion and heat resistance of Stainless Steel 347H Square Bars and other metals are exhausted, high performance alloys including Nickel become the designer’s material of choice.
In aero engines, the combination of Stainless Steel 347H Flat Bars for the cooler compressor areas and nickel super – alloys for the hot gas path in the turbine, enable an optimized weight and performance ratio to be achieved.In fuselage applications, the strength characteristics and corrosion resistance of Stainless Steel 347H Threaded Bars provide them with a role in both structural areas and for fasteners.
Even in composite mould tooling, Stainless Steel 347H Hollow Bars are used to take advantage of their low thermal expansion features.
Although its weight and low strength characteristics deny it wide application in aerospace products, Stainless Steel 347H Hexagonal Bars nonetheless is an important element in the design of electrical systems, transformer and heat exchanger applications.Stainless Steel 347H Round Bar | Stainless Steel 347H Round Bar | Stainless Steel 347H Round Bar | Stainless Steel 347H Round Bar | Stainless Steel 347H Round Bar | Stainless Steel 347H Round Bar | Stainless Steel 347H Round Bar | Stainless Steel 347H Round Bar | Stainless Steel 347H Round BarQuenched of Stainless Steel 347H Triangular Bars are limited in their tempering potential and so accuracy can only be obtained on smaller parts.
Special high chromium and nickel – alloyed 347H Stainless Steel Bars resist scaling and retain strength at high temperatures.SS 347H Round Bar SpecificationsSpecifications:ASTM A276, ASME SA276 / ASTM A479 ASME SA479Dimensions:EN, DIN, JIS, ASTM, BS, ASME, AISISS 347H Round Bars:Outside Diameter in the range of 4mm to 500mmSS 347H Bright Bars:Outside Diameter in the range of 4mm to 100mmSS 347H Hex Bars:18mm – 57mm (11/16″ to 2-3/4″)SS 347H Square Bars:18mm – 47mm (11/16″ to 1-3/4″)SS 347H Flat Bars:1/2” to 10” in thickness range of 2mm to 150mm,Finish:Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA FinishLength:1 to 6 Meters, Custom Cut LengthsForm:Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.347H Stainless Steel Round Bar Chemical CompositionGradeCMnSiPSCrCbNiFeSS 3470.04 – 0.102 max1.0 max0.045 max0.030 max17 –198xC – 1.109.0-13.062.72 minStainless Steel 347H Rods Mechanical PropertiesDensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation8.0 g/cm31454 °C (2650 °F)Psi – 75000 , MPa – 515Psi – 30000 , MPa – 20535 %Equivalent Grades for 347H Stainless Steel Round BarSTANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENSS 347H1.4961S34709SUS 347H–––X6CrNiNb18-12SS 347H Round Bar Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Stainless Steel 347H Pipe Fittings, which are often specified when high strength is needed in moderate – to – large sections.
Whether tensile or yield strength is the basis of design, thermally treated Stainless Steel 347H Compression Pipe Fittings generally offer high strength – to – weight ratios.
For applications requiring maximum ductility, SS 347H Compression Fittings with low Sulphur levels can be supplied by producers using ladle – refining techniques.In general, wear resistance can be improved by increasing the hardness of these Stainless Steel 347H Ferrule Pipe Fittings, by specifying an alloy with greater carbon content (without increasing hardness), or by both.
The surface of flame – hardened, medium – carbon steel, for example, Stainless Steel 347H Double Ferrule Pipe Fittings is likely to have poorer wear resistance than the carbon – rich case of a carburized steel of equal hardness.Stainless Steel 347H Pipe Fittings | Stainless Steel 347H Pipe Fittings | Stainless Steel 347H Pipe Fittings | Stainless Steel 347H Pipe Fittings | Stainless Steel 347H Pipe Fittings Exceptions are nitride parts of these 347H Stainless Steel Compression Pipe Fittings, which have better wear resistance than would be expected from the carbon content alone.
For any combination of 347H SS Ferrule Pipe Fittings and heat treatment, three factors tend to decrease toughness: low service temperature, high loading rates, and stress concentrations or residual stress.
However, care is necessary for both cold and hot worked materials because these 347H Stainless Steel Double Ferrule Pipe Fittings have high strength.Stainless Steel 347H Pipe Fittings / Accessories SpecificationsSpecifications:ASTM A182 ASME SA 182Tube Size:1/16”OD to 2”OD, 2mm OD to 50mm ODThread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Pressure Rating:6000PSI for Stainless Steel, 300/1000/3000PSI for BrassSS 347H Pipe Fittings Chemical CompositionGradeCMnSiPSCrCbNiFeSS 347H0.04 – 0.102.0 max1.0 max0.045 max0.030 max17.00 – 20.008xC – 1.109.00 – 13.0063.72 minStainless Steel 347H Accessories Mechanical PropertiesDensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation8.0 g/cm31454 °C (2650 °F)Psi – 75000 , MPa – 515Psi – 30000 , MPa – 20535 %Equivalent Grades for 347H Stainless Steel Pipe FittingsSTANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENSS 347H1.4961S34709SUS 347H–––X6CrNiNb18-12SS 347H Pipe Fittings / Accessories Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
Sachiya Steel International is one of the Leading Manufacturer And Exporters of Stainless Steel 347H Threaded Forged Fittings, which has high corrosion resistance in chloride-containing media, including seawater.
Our Stainless Steel 347H Forged Threaded Elbow is machinability–improved version and is well suited for use in, for example, organic acids.
These Stainless Steel 347H Forged Threaded Tee offers excellent and consistent machining properties for increased cutting speeds, reduced tool wear, and set–up times.
Our Stainless Steel 347H Forged Threaded Cross is exposed for prolonged periods to temperatures exceeding 300 Degree C (570 Degree F).The microstructure of these Stainless Steel 347H Forged Threaded Cap changes which result in a reduction in impact strength, where this effect does not necessarily affect the behavior of the material at the operating temperature.
Our Stainless Steel 347H Forged Threaded Fittings has a far lower coefficient of thermal expansion than austenitic alloys and can therefore possess certain design advantages.
In terms of resistance to general corrosion, these Stainless Steel 347H Forged Threaded Coupling is comparable or superior alloys in most media.Stainless Steel 347H Threaded Forged Fittings | Stainless Steel 347H Threaded Forged Fittings | Stainless Steel 347H Threaded Forged Fittings | Stainless Steel 347H Threaded Forged Fittings | Stainless Steel 347H Threaded Forged Fittings | Stainless Steel 347H Threaded Forged Fittings | Stainless Steel 347H Threaded Forged FittingsCompared to our Stainless Steel 347H Forged Threaded Union, which does not contain molybdenum, it is clearly far superior.