Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High-Quality Stainless Steel 446 Wire Mesh, which is the most widely used of all stainless steel alloys. Stainless Steel 446 Hexagonal Wire Mesh is typically used in the annealed condition, at service temperatures through 750 Degree F, however, it may be heat-treated for high strength. SS 446 Welding Wire Mesh is welded with matching or with filler wire, where hardenability is limited and sections over one inch may not develop full properties.
SS 446 Netting Wire Mesh is annealed up to 1300 Degree F – 1450 Degree F for two hours, and the air cools. Recrystallization anneal these Stainless Steel 446 Woven Wire Mesh for better ductility and fatigue strength, along with heat with the temperature of 1750 Degree F for two hours, and then furnace cool. For maximum fracture toughness and SCC resistance, anneal this SS 446 Spring Steel Wire Mesh up to 1950 Degree F for 1-2 hours, and then water quench.
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Stainless Steel 446 Flanges, which is available in dissimilar sizes and shapes for our clients.
Our Stainless Steel 446 Slip On Flanges is an age – hardening martensitic stainless combining high strength with the corrosion resistance of stainless steel.
Unlike conventional martensitic stainless steels, these Stainless Steel 446 Threaded Flanges is quite weldable, where hardening is achieved by a short – time and simple low – temperature treatment.
The strength, corrosion resistance and simplified fabrication can make our Stainless Steel 446 Weld Neck Flanges a cost – effective replacement for high strength carbon steels as well as other stainless grades.At the solution treating temperature, 1900 Degree F, these Stainless Steel UNS S44600 Blind Flanges is austenitic but undergoes transformation to a low – carbon martensitic structure during cooling to room temperature.
This transformation in our Stainless Steel 446 Socket Weld Flanges is not complete until the temperature drops to 90 Degree F. Subsequent heating of these Stainless Steel 446 Lap Joint Flanges to temperatures of 900 Degree F – 1150 Degree F for one to four hours precipitation strengthens the alloy.Stainless Steel 446 Flanges | Stainless Steel 446 Flanges | Stainless Steel 446 Flanges |Stainless Steel 446 Flanges | Stainless Steel 446 Flanges |Stainless Steel 446 Flanges | Stainless Steel 446 FlangesThis hardening treatment in our Stainless Steel 446 Ring Joint Type Flanges as well tempers the martensitic structure, increasing ductility and toughness.
These Stainless Steel 446 Spectacle Blind Flanges is an austenitic heat resistant alloy with oxidation resistance to 1900 Degree F under constant temperature conditions.Stainless Steel 446 Pipe Flanges SpecificationsSpecifications:ASTM A182 / ASME SA182Size:1/2″ (15 NB) to 48″ (1200NB)Standards:ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.Class / Pressure:150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.Standard:ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.SS 446 Pipe Flanges Chemical CompositionGradeCMnSiPSCrMoNiNFeSS 4460.2 max1.5 max0.75 max0.04 max0.030 max23 – 30–0.50 max0.10 – 0.25BalanceStainless Steel 446 Plate Flanges Mechanical PropertiesDensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation7.5 g/cm31510 °C (2750 °F)Psi – 75,000 , MPa – 485Psi – 40,000 , MPa – 27520 %Equivalent Grades for 446 Stainless Steel Industrial Pipe FlangesSTANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENSS 4461.4762S44600–––––SS 446 Flanges Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
Sachiya Steel International is one of the well-known manufacturers for high quality Stainless Steel 310 Wire Mesh, which contain 16 percent to 26 percent chromium and up to 35 percent nickel, which, like manganese, is a strong austenite.
SS 310 Hexagonal Wire Mesh has characteristics from an invisible, self – healing chromium oxide film that forms when chromium is added at concentrations greater than 10.5 percent.
The best corrosion resistance is obtained in this austenitic Stainless Steel 310S Welding Wire Mesh, where their microstructures consist of very clean crystals in which all alloying elements are held in solid solution.Austenitic SS 310 Netting Wire Mesh cannot be hardened by heat treatment; they are also nonmagnetic.
The ferritic and martensitic Stainless Steel 310S Woven Wire Mesh both have an excellent microstructure, where the latter has a higher carbon level and can be hardened and is used for knives and tools.
Stainless Steel 310 Spring Steel Wire Mesh contain only up to 0.12 percent carbon, which also have chromium as their main alloy addition and practically no nickel.
Corrosion resistance of this Stainless Steel 310S Fencing Wire Mesh is modest, and they are ferromagnetic.
