Why does file explorer freeze up?

Computer viruses are a security threat and also cause several errors like “ERROR_VIRUS_INFECTED.” This error mainly followed by the “Operation did not complete successfully because the file contains a virus” notification.

In this article will show you how you can easily fix this issue with possible solutions and convenient methods: How to Fix Operation Did Not Complete SuccessfullyChange AntivirusRemoving your antivirus from your operating system is not the best fix, but it can help to fix this issue.

However, sometimes Defender causes the operation did not complete the error.To fix this issue, you need to disable Windows Defender properly on your system.Here are the steps to follow:Tap the Windows + I button on your keyboard to launch the settings application on your device.Under the Settings, select the “Update and security” option, in the left pane, move to the “Window Defender,” and then in the right pane click “Real-time Protection.”After the above process, Window Defender will turn off, and you can run your file without any issue.To completely turn off Windows Defender, you have to edit the registry.Here are the steps to follow:Tap the Windows + R button to open the run command prompt.In the Run command –line type “Regedit” and then tap the “Enter” button or tap “OK.”In the left pane you need to move on:HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows Defenderkey.

Locate “DisableAntiSpyware DWORD” in the right pane.

Now type “DisableAntiSpyware” as the new name of DWORD and then double-tap on it.Set the value from 0 to 1 and then click “OK” to save your changes.After the above process Windows Defender will permanently turn off, and you can’t see this error on your device again.If you don’t wish to edit your registry, you can turn off Windows Defender via “Group Policy Editor.”Here are the steps to follow:Tap the Windows + R button on your keyboard and then type “gpedit,msc.” And then, hit the “Enter” button or tap “OK.”When the Group Policy editor appears on the screen, navigate to the left pane and select “Computer Configuration” click “Administration Template” hit Windows Computer” and then click “Windows Defender.In the right pane double-tap on Disable Windows Defender.”Click the “Enable” button and then select “Apply” and hit “OK” to save your changes.Now restart your PC and check for improvement.Add Problematic File into Exclusion ListIf you are facing this error when you are trying to access any files, it is possible that there is a problematic file.

Simply add it to the Exclusion list to fix the problem.Reinstall Antivirus“Operation did not complete successfully” error may occur due to improper installation of antivirus.

System Restore is an important tool packed with various utilities and functions.

Sometimes it doesn’t work and shows a message “System Restore didn’t complete successfully,” or it may also include an error code “0x800700b7.” Here are the steps to fix the issue.

The error can be due to interference of your antivirus program with “System Restore.” It also may be caused due to unfinished installation of your existing software having incomplete registries.

In this case, it is recommended to fix this error code with these instructions and methods:

Method 1: Installing Pending Software Completely

Check all the recently installed software.

We have never doubted the software program that was developed by Microsoft, and their house  Antivirus, aka Window Defender, is one of them.

However, several users haven’t disabled the services of Windows Defender.

If you are also one of those users who are facing virus related issues on your device and would like to sneak out them, then follow the below-written methods to attain the knowledge about disabling of Window Defender.

So, here are the steps to permanently turn off Windows Defender Antivirus.

Through Group Policy To launch the Run dialog box by pressing Win + R keys together on your keyboard.After that, enter ‘gpedit.msc.’ select the OK tab to launch ‘Local Group Policy Editor.’You should search the pursuing path: Computer Configuration> Administrative Templates> Windows Components> Windows Defender Antivirus.Go to ‘Turn off Windows Defender Antivirus and twice click on it on the right-hand side panel.Choose the option Enabled, and then click on the Apply button then pick the OK tab.Search: Computer Configuration> Administrative Templates> Windows Components> Windows Defender Antivirus> Real-time Protection.Reach the policy ‘Turn on behavior monitoring.’Choose the option Disabled and select the Apply tab.Click on the OK tab.Navigate to policy ‘Monitor file and program activity on your computer.’Choose Disabled and choose the Apply option then pick the OK tab.Select the policy ‘Turn on process scanning whenever real-time protection is enabled’ and twice click on it.Reach the Disabled tab and choose the Apply option then select the OK tab.Navigate to ‘Turn on behavior monitoring and twice click on it.Later, choose the Disabled tab and select the Apply option then pick the OK tab.Now, reboot the system.Through the RegistryPress Win + R keys together on your keyboard to launch the Run dialog box.Then enter ‘regedit’ then select the OK to launch the Registry.You should search the pursuing: HKEY_LOCAL_MACHINE\SOFTWARE\policies\Microsoft\Windows Defender.Navigate to Windows Defender folder, and right-click on it then choose the New and select the ‘DWORD (32-bit) Value.Input the key name ‘DisableAntiSpyware.’ Then press the Enter key.Go to the key that was freshly created and twice click on it and adjust its value to 1 from 0.Click on the OK tab.Navigate to the folder of ‘Windows Defender’, then select the ‘New’ button and press the key.Input the key name ‘Real-Time Protection’ and hit the Enter button.After that, go to the folder of ‘Real-Time Protection’ and choose the ‘New’ then click on the value of DWORD (32-bit).Rename the key named ‘DisableBehaviorMonitoring.’ Then hit the Enter button.Twice click on the freshly made key and adjust the value from 0 to 1.Press the OK button.Reach folder of ‘Real-Time Protection’ and right-click on it.Choose the New option and press the ‘DWORD (32-bit) Value’.Give a new name to the key named ‘DisableScanOnRealtimeEnable.’ Then hit the Enter button.Twice click on the freshly make key and adjust value to 1 from 0.Finally, hit on the OK key.Through the Security Center Launch ‘Windows Defender Security Center’ on the Windows 10.After that, click on the option ‘Virus and threat protection.’You should select ‘Virus and threat protection settings.’Now, disable ‘Real-time protection’ switch toggle.Richard Branson  is a technology enthusiast who loves writing about new advancements and IT threats on a regular basis.

Her work focuses on the latest advancements in the realm of technology, social media, and cyber security at norton.com/setup.

QuickBooks Error the File Exists usually occurs when the downloaded file of the program got corrupted and the software unable to get the update.

This error can also come if the windows firewall is interrupting the connection between QuickBooks and Intuit.

To solve this error you can click on the given link to find more about it.

You can also call our certified technical experts to get instant resolution dial (855)-526-5749.

You get a message after you get or send letters that state “Unfit to process approaching information,” you most likely downloaded a harmed access number rundown the last time your checked or sent mail.

You can without much of a stretch fix this issue by finding the harmed document on your computer, erasing it, and refreshing your entrance number rundown.

To locate the harmed access number record on your computer- Steps are to follow and erase the issue and harmed document

Find your username which you have created in your Juno email

On the taskbar, tap the Start catch, point to Programs, point to Juno and click Juno System Information.

A content record creates the impression that contains data about your computers assets and documents that Juno needs to work.

Juno Email Support Phone Number

QuickBooks Error 3371 Status Code 11118 is caused when the QuickBooks system file entitlementDataStore.ecml gets damaged, which contains the license properties of your QuickBooks Desktop.

However, there are a number of clients reporting that every file on their system’s desktop has been removed.

This guide will provide details that you will need to know, including the solution to resolve the bug and get the files back again.

The newest update just shifted them to a folder of another user’s account.

According to experts, it seems like Windows 10 is accessing a temporary profile in order to use it while updating, but failed to restore the profile when completed.

In case you are utilizing Windows 10, then your PC already has installed it.Microsoft has downloaded the latest update on the number of devices and has not faced the bug yet.

The error is likely to arise during the installation procedure of update.Method to Uninstall the Update and Get the Files BackIn case you have faced the error, there is one easy and straightforward method to resolve it and obtain the files back, i.e., uninstall the problematic update.

No, I don't mean the terms and conditions...

Microsoft emitted an update to next year's Windows 10, aka 20H1, last night, with some tweaked networking and the spreading of the creepier-than-you-might-have-realised Cortana to more Insiders.

Build 18956 is very much a steady-as-she-goes affair for Fast Ring Insiders as Microsoft continues to recover from the accidental blurting of the OS to all rings of the Windows Insider program, regardless of the desires of its unpaid army of amateur testers.

A user can then drop into the network to see what is actually using that precious data and slap on limits accordingly (although only on a network basis at present.)

As if to underline the inconsequentiality of the thing, Microsoft suggests wheezes such as asking it the weather, or requesting a joke.

The underlying assistant technology will, of course, find its way into Office.

Users globally have chosen the absolute most powerful file manager, es file explorer.

You can manage your files with Es file-explorer effectively.

With es file explorer, you can easily control your files and folders on your own device and cloud storages.

Your Windows 10 or 7 inch tablet is incomplete without the latest updates. For this reason, you have to keep an eye on the latest updates. Keep it in mind that new updates for Windows 10 will be available November 2019. Codename 19H2 is ready to release. The latest version will be known as the 1909 version. This quick and small windows 10 updates will be available in the form of a service pack. It will be an excellent addition to improve the performance of Windows 10.

https://buybulktablets.com/new-features-expected-windows-10-november-2019/

Easy to follow steps to take a screenshot in Windows

Windows have been the most promising operating system for desktop and laptops.

You can take screenshots on Windows 10 by following some simple steps, which will be discussed in this article.

The steps mentioned below will tell you how to screenshot in Windows:-

The first step is to press ‘Windows key+ Print Screen’ from the keyboard.

Now, you have to click on the ‘Picture library’ by launching Explorer, using ‘Windows key+e’ and then click on ‘Pictures’ folder, which is visible in the left pane.

Visit@:-McAfee.com/Activate | office.com/setup | Norton.com/setup |

Microsoft developed Outlook Express, a free desktop-based email client that comes free with Windows Vista, Windows XP, and older versions.

But there are still several users of Outlook Express who want it for email conversation.

To effectively sort out the problem of Outlook Express, this post describes a quick answer to import DBX file to Outlook in Windows 7, 8, 10 with the help of SysInfoTools DBX to PST Converter.

The Manual Guide to Import outlook express mail to Outlook 2007

The manual solution to export Outlook Express DBX to Windows Outlook contains 4 different methodologies which, together, help you transfer emails from Outlook Express to Outlook PST 2007 and 2010.

Follow these steps to export mail from Outlook Express.

It also gives you a random solution to log out from your account first and then get into your account by signing in.

Then navigate to the “HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList.”

Now search for the folder with ProfileImagePath indicating to c: users.

After that, you have to reboot your system and then sign in with an activated user account.

Now, the directory storage location through a text will present on your display which reads: C:\Users\(Your User)\documents.

Now, Sign out from your existing account and then re-log into your issue, creating an account.