Rebar couplers are used in reinforced concrete structures to replace normal rebar lap joints. The Rebar couplers are also suitable for use in reinforced concrete columns and walls. Each rebar coupler consists of a piece of rebar equipped with a thread and coupler sleeve at the right end as viewed in the direction of installation. In construction joints, rebar couplers can be used to replace all pieces of rebar going through the formwork. Our range of products include Taper Rebar Coupler, Cold Forged Rebar Coupler Type II, Steel Rebar Coupler, Cramping Rebar Coupler, MBT Rebar Coupler and Bar Break Rebar Coupler. Rebar couplers are used for joining rebars with full tension capacity. The ends of bars to be joined are provided with threads, and the bars are joined using a coupler sleeve that transfers the force on the rebar across the connection.Reinforcement couplers are used to reinforce the cast-in-situ and element structures of buildings, where the idea is to replace the normal lap joint of the rebar with a coupler that transfers force from the rebar. The coupler is used for strongly reinforced structures where there is no room for lap joints on the bar. For designing the joints of the reinforcement coupler’s application products, the software ACOLUMN is available for the moment rigid joints of the beam. The software for designing the anchoring bolts and foundation bolts is ASTEEL. The reinforcement coupler is used as the main reinforcement of heavy-duty element and castin-situ structures as a replacement for a normal lap joint. The coupler has been designed for the tensile resistance of rebar. A structure designed with traditional reinforcement can be changed to utilise a reinforcement coupler of the same bar size on site. The coupler serves as a replacement solution for lap-jointed main reinforcements of slabs, beams and columns. It is available in Mumbai, Delhi, Hyderabad, Chennai, Surat, Ahmedabad, Kota, Pune, Satara.
