Unclogging the bathroom pipe

The entry of small objects and long hair into the bathroom pipe is a common cause of blockage and clogging of the bathroom sewer pipe. In the following, we introduce methods to unblock the bathroom drain. Stay with us. In addition, if you face this problem and are looking for the easiest and fastest way to unclog the bathroom pipe, you can contact Tehran's pipe opener.

When you need a bath, it is very annoying to have the pipe blocked and the water filling up in the bathroom. Faced with these conditions, before contacting a pipe opener, use the following methods to open the sewer pipe of the bathroom.

Study proposal: Types of building waterproofing

Necessary equipment for opening the bathroom pipe

• screw driver
• Manual spring
• gloves
• Cloth or sponge

Methods of unclogging the bathroom sewer pipe

In the following, we will talk about some methods of unclogging the bathroom pipe.

Empty waste from the bathroom sewer pipe

1. Open the bathroom shoe cover. Usually, the accumulation of various substances and blockages occur at the top or bottom of the shoe door. Select the appropriate screwdriver and unscrew each screw.
2. Remove the clogging agent. If you look carefully, you will see substances on the door of the shower, around and under it, which will clog the bathroom pipe. It is easy to clean this part, so always try to carefully and patiently remove this material and hair stuck to the shoe.
3. Clean around the pipe. Usually, detergents such as soap and shampoo stay around the shoes and the materials stick to them. After you open the shoe cover, wipe and clean around the tube with a tissue or sponge. Otherwise, if this part of the pipe, i.e. around the shoe, is not cleaned, it will cause big problems and severe blockages.
4. Use a manual pipe opening spring to empty the material from the bathroom sewer pipe.
5. Prepare a thin spring and insert it into the pipe until it touches the clogging agent. Then remove the tube blockage by turning the spring. Often sediment, mud and hair that have caused the tube to clog stick to the spring and are removed. In this way, the blockage of the pipe will be removed.
6. Use the manual spring again.
7. Wash the pipe with water and clean the material left in the pipe by turning the spring inside the pipe again. Most of the time, the hair sticks to the pipe wall. If you clean them patiently and thoroughly, the bathroom sewer pipe will stay clean for a long time.
8. Try the bathroom drain.
9. Now, at this stage, pour the bucket full of water into the pipe. If the water does not rise, the problem is definitely solved.
10. Close the bathroom shoe cover.
11. After you have completely cleaned the shoe, put it back in its place and close its screws.

Study proposal: Clogging of the gutter pipe

Unclogging the bathroom pipe with a solution of baking soda and white vinegar

1. Clean the bathroom shoe rack.
2. As mentioned above, first remove the shower cap and clean it because there may be a blockage in the cap. In this case, you can simply wipe it with a cloth.
3. Prepare boiling water.
4. Boiling water is often the easiest and best way to clean and unclog the pipe because it softens the material and causes it to decompose. So fill a kettle with water and boil it.
5. Empty the boiling water directly into the bathroom drain. Of course, its heat should not be so hot that it causes leakage and loss of sealing of pipe connections.
6. Carefully empty the boiling water directly into the pipe so that it does not spill around and splash on your body until the pipe opens.
7. Prepare 1/4 cup of baking soda and 1 cup of white vinegar and pour it into the tube.
8. By preparing these ingredients, a powerful solution will be made to unblock the pipe. By pouring baking soda and then vinegar into the pipe, the clogging agent will be removed during a safe chemical reaction.
9. You have to wait 15 to 20 minutes.
10. In this step, it takes 15 to 20 minutes for the solution to show its effectiveness. If the tube is blocked by hair and other substances, this method is perfect for unblocking the tube.
11. Prepare more boiling water.
12. By pouring baking soda and vinegar into the tube, the substances that were in the tube are decomposed. Now, at this stage, more boiling water should be poured into the pipe to completely clean the bathroom sewer pipe. If the pipe is not cleaned and it is still blocked, you should use another method because this method is for small blockages.

Using a pipe unclogging pump to unclog the bathroom pipe

1. Cleaning around the pipe
2. Remove the shoe cover and clean the area around the bathroom shoe. If there is hair, soap or other substances under the shoes, clean them.
3. Fill the bath with water
4. If you have a bathtub, fill it with water because water makes pumping better. If you don't have access to a bathtub, you should keep the water in the bathroom open so that the water collects on the floor of the bathroom and rises. With the presence of water, more pressure is applied to the pipe, and the job of unblocking the pipe is done easily.
5. Prepare the pump
6. At this stage, the pump should be placed on the pipe 5 to 10 times and immediately pushed down and pulled up. In this case, dirty water comes out of the pipe. Watch out for possible dirty work. It is necessary to check the exit of dirty water from the pipe after pumping 10 times. If the dirty water does not come out, the pump should be pushed with more force and pressure. If nothing comes out of the tube, you should know that the blockage of the tube is very serious. In this case, the services of a pipe opening company are needed.
7. Unblocking the bathroom sewer pipe using the methods explained above is for removing small and superficial blockages in the bathroom sewer pipe, and they do not have an effect on removing severe blockage of the pipe. If the blockage of the bathroom sewer pipe is severe, you will need the services of pipe unclogging companies. To solve your problem in this field. Because it has expert and experienced service workers in this field, who will solve your problem immediately and guaranteed with advanced and modern devices without carving and dirty work.

Study proposal: لوله بازکنی غرب تهران

2 simple methods to prevent bathroom sewer pipe clogging

It is usually best to prevent blockages before they occur in the bathroom drain. In fact, prevention is better than cure. We recommend the following methods:

Use a suitable strainer and mesh on the bathroom sewer pipe.

It is better to put a strainer and net in the bathroom pipe. Of course, it should be noted that its metal type is much better than plastic because it is fixed and does not move. By placing this strainer, additional materials will not enter the pipe, as a result, there will be no blockage in the pipe. There is a type of strainer that has tiny holes. This type of strainer has the ability to collect soap pieces. In order not to have to use the methods of unblocking the bathroom sewer pipe, use a strainer and a net in the bathroom sink and clean the hair and sediments collected in it.

Rinse the bath after each bath.

This method is very simple and at the same time very effective. It is better to wash it clean and clean after every bath and direct waste and extra materials to the pipe with hot water pressure. Then remove the strainer and clean it. With this method, you will prevent the pipe from clogging. In this regard, if you need help, you can call Ferdous Blvd.