The installation of solar panels requires a team of professionals in solar energy. The process is not easy, so it is essential to have the right technicians. However, although always depending on the size of the installation, those who must intervene in it are: engineers, architects, electrical installers, mechanical and administrative assemblers for legal procedures. Solar panels use a very simple technology for their operation. There are cities that have already prepared their own map of roofs and their characteristics to make it easier for their inhabitants to install solar panels.
Step 1 – Design a Support Structure that, they give you maximum solar efficiency:
Designing a support structure is the main step. If there is nowhere to hold the panels, they will hardly stand up. Before installing one or more Solar Panel in Australia, it is essential to take into account some aspects: the first is to know the real possibilities of the house where it is going to be installed and make an analysis of its daily energy consumption in the house. “You have to differentiate between installing plates on a roof or doing it on the ground. In the first case, moreover, designing the installation for a flat roof is not the same as for a sloped one.”
Step 2 – Install the Panels:
The industrial engineer explains that “if the roof is flat, the panel is always installed facing south. The inclination must be 30 degrees to make optimal use of energy throughout the year.” Experts also recommend having between six and ten square meters of roof to install a minimum of four panels for a single-family home and each of them can have an individual cost of about 90 euros plus installation. That is what Manel Romero, the delegate of UNEF (Spanish Photovoltaic Union) in Catalonia, suggests. Typically, solar panels are always placed on the roofs. Economic savings with solar panels is possible, in addition to the fact that their installation contributes to the sustainability of the planet.
Step 3: Connection with the inverter:
The function of the latter is to convert the electricity that is received in the form of direct current to alternating current, which is what we normally consume as the tindo solar panel also connect with the tindo inverter to give you maximum efficiency. This inverter must be sheltered from the sun's rays. Finally, you have to take the current from the inverter to the electrical panel that is inside the home or building.
Step 4: from the inverter to the electrical panel:
“It is important to talk about two modes of consumption at this time: instant self-consumption or by accumulation. The instantaneous one, that is to say, the one that you do during the hours of sun, does not need batteries, while the other allows you to accumulate the energy to consume it outside the hours of sun”, If we talk about self-consumption, we also have to refer to two types of facilities, those that discharge unconsumed surpluses throughout the day into the electrical network (the most common) and those that do not discharge surpluses into the electrical network. The structures and supports of the solar panels can be mobile, that is, they move throughout the day following the sun. In addition, there are other secondary elements in this type of facility such as the bidirectional meter, which allows the energy generated to be counted together with the energy consumed from the network, the energy charge regulator for the batteries (if any) and the wiring of the installation. It is essential to present a series of procedures and licenses to the corresponding town hall to obtain permits for the placement of solar panels.
Not to make mistakes:
Once it is clear how to install solar panels it is essential that no mistakes are made. The most frequent are usually to install them in lines, in such a way that some shade the others, and to anchor them poorly, and cause major damage or even worse. However, we must not forget that no matter how well we know the types of solar panels and their operation, not everyone is qualified to install one in their workplace or home. Carlos Montoya, head of the Solar Department briefly and very graphically explains why: "In the same way that we could not put an air conditioning unit in our home, we cannot install a panel either. Solar manufacturer in Australia performance has undisputedly outperformed in Solar competition on durability hence we want “Australian Made” to stand in this world. Tindo Solar Installers Providing Expert Solar Energy Solutions for Countless Local Customers. Get A Quote Today, Call Now. On the other hand, has launched a pioneering functionality in Australia that lets you know how much you can save if you opt for self-consumption in a home. Thanks to it, you can know an approximate estimate of what you will pay for electricity, as well as the cost of installation and the number of plates recommended based on current consumption. This tool can be accessed from the bank's website and from the 'app' itself. To do this, you only have to enter the address of your home and, if you know it, the approximate amount of your electricity bill.
