If you are installing your printer for the first time and want to put paper in Brother printer, then you will get familiar with its steps here. Through this article, you will know how to put paper in Brother printer paper tray1 and the paper tray2.
visit at- Setup.brother.com
How to Put Paper in Brother Printer Paper Tray #1
- Firstly, take out the paper tray from the Brother printer to put paper in Brother printer.
- Close the first paper support flag if open, and then close the second one.
- Adjust the length of the paper tray if required according to the type of paper.
- Press the paper guide and slide it to fit the paper size, ensuring that the triangular mark on the paper guide lines up with the paper.
- After that, open the output cover of the paper tray1.
- Press the paper length guide and slide it to fit the size of the paper.
- Ensure that the paper is appropriately stacked to avoid paper misfeeds and jams.
- Now, put paper in Brother printer using the below steps:
A. If you are using a letter, A4, or executive size paper, close the output cover of the paper tray and put paper in Brother printer paper tray. Ensure that you keep the print side down and flat in the tray in landscape position.
B. If you use the ledger, A3, or the legal size paper, put paper in Brother printer paper tray. Ensure that you keep the print side down and the top edge first. Also, ensure that the pages are flat in the tray and are in a portrait position. Now, close the output cover of the paper tray.
09. Once you put paper in Brother printer, adjust the paper guide to fit the paper size with the help of both hands. You must ensure that the sides of the paper touch the paper guide.
10.You must also ensure that the paper is flat in the tray and does not exceed the maximum paper mark. You must not overfill the Brother printer paper tray.
11. Keep the paper tray back in the printer once you put paper in Brother printer.
12While holding the printer paper tray in its position, pull out the first paper support flag until it gets locked into its place, unfolding the second paper support.
Visit at- Setup.brother.com
How to Put Paper in Brother Printer Paper Tray #2
- Firstly, take the paper tray from your Brother printer out to put paper in Brother printer.
- Now, adjust the paper tray length according to the paper size if required.
- Open the printer paper tray cover, press the paper guide and slide it to fit the paper size.
- When you load A4 or the letter-size paper, keep it landscape orientation and raise the A4/LTR stopper. Ensure that the mark of the paper guide lines up with the paper mark.
- Now, put paper in Brother printer paper tray with the print side down and in a position according to the paper size.
- Adjust the paper guide to touch the side of the paper stack. Ensure all the papers are flat in the tray and not above the maximum paper mark.
- Once you put paper in Brother printer, close the tray cover and insert it back into your Brother printer.
- When you use a legal or the A3 size paper, you must extend the paper tray1 over tray2. You have to pull out the paper tray1 from the printer. After that, as you take out the front part of the paper tray, press the release button.
- When you use an A4 or letter size paper, take out the first paper support flag and open the second paper support. If the letter-size paper is in paper tray1, open the output tray cover and raise the A4/LTR stopper to keep the pages in landscape position. Close the printer output tray cover and insert it back into your Brother printer. Lastly, take out both the paper support flag of the printer.
Final Words
Before you start printing, you have to load paper on the printer. Whenever you get stuck, you can take the help of the above steps to put paper in Brother printer using the above actions easily. Here, you have the step-by-step guide that helps you correctly put paper in Brother printer.
FAQs
Q1- Can I load a ledger-size paper in a Brother printer?
Ans- You can put the ledger-size paper in the Brother printer. You have to ensure that it is of size 11 x 17 inches (279.4 x 431.8 mm). You can easily print, copy and fax the ledger-sized paper via your Brother printer.
Q2- How can I adjust the paper size of the Brother printer?
Ans- First, press the Tray Setting button and the paper size you have in Tray1 and Tray2. For Tray1, press the right or the left arrow and scroll down to the paper size option. Now, select the paper size. For Tray2, you can directly choose the paper size. Finally, press the Exit or the Stop button.
Q3- What if I do not load the paper properly?
Ans- If you do not load the paper correctly in the tray, you might face paper jam. Once you encounter the paper jam, you must remove all the jammed paper from your Brother printer.
Source : https://pastelink.net/ohkipu9t
Dial Brother Printer customer Support Number Canada +1-855-536-5666 and Get Best Customer Care Service For Printing Issues.
At the time when users look for printing solution.
Brother Printer Customer care is available 24*7, no matter what time it is, if you are facing problems related to your Brother Printer such as printer not printing, wireless printer not connecting, paper jam, driver, and software updates etc.
