Printer Setup
Printing Issues:
Printer Offline:
Scanning Issues:
Commercial printing machines usually face errors and one can see the reason flashing on the monitor screens.
If you own a HP Printer and you’re witnessing an error, you can easily find the exact solution.
There can be various causes to it.
To ensure that the cables are plugged the right way- turn off the printer, unplug the cable, wait for a few seconds, reconnect the cables and then restart it.Step 2- Check the cartridge placementincorrect installation of cartridges is a commonly seen problem when HP Printers are not responding.
So, make sure that printer cartridges are not empty and are installed properly.Step 3- Check the software If the software is not properly set up, you will face the issue of HP Printers not responding.
In such a case, the printer will not load into the system and will show log in errors.
KOMINFO - The ministry of Communication and Informatics (Kominfo) open internet access in the District of Wamena, Papua, at 09.00 CET, today (28/9).
Kominfo to block access to data services in Wamena, Papua on Monday (23/9).
(Read: Telkomsel and Indosat Limit Internet Access in Wamena )
Executing Tasks (Plt) Head of public Relations Bureau of the Ministry of Communications Ferdinandus Setu told, the government made restrictions service internet data in Wamena, after the rallies and riots at the beginning of last week.
It was triggered by the spread of false information or hoaks, false news and hate speech.
Thus, the entire telecommunication service and the internet in 29 districts/cities in Papua and 13 districts/cities in West Papua has been running normal.
Brother Printers have now incorporated the feature of wireless connectivity and it has taken the printing expedition to a new level.
Whenever a person purchases a printer, it is always expected to get the best result possible.
Now coming to the Brother Printer error code TS-02, it is an indication that the access point of the router or WLAN to which your printer has been connected is causing some troubles while authenticating itself with the MAC address.
In simple terms, it means that the access point or the Wi-Fi router cannot be located by the system.
There can also be other small issues behind the error which will be discussed later on.
You can keep on reading further or can directly engage yourself with the Brother Printer customer support and get the error resolved through their remote service.Some other reasons behind the error code TS-02The printer has not been installed properly in the systemAny corrupt hardware which was detected was not deleted completely from the system.Any presence or entry of corrupt system files.The files in the Windows system was damagedIt is always advised to look for the actual cause behind the error and then apply the troubleshooting method in order to save your time and effort.How to fix the Brother Printer error TS-02?Step 1- The first thing that you are required to do is whether the Wi-Fi router to which your printer and system are connected is switched on.Step 2- Now with the help of an Ethernet cable or built-in wireless LAN, you need to connect the printer to the internet connection and make sure that the access point of the WLAN works properly.Step 3- Now either bring the printer close to the router so as to avoid any net connectivity barrier and issues.Step 4- Now the printer kept within the range of 1 meter or 3.3 feet from the router, you are required to ‘RUN’ the printer’s temporary location.Step 5- See that your Brother Printer is using the radio signals within the range of 4 GHz.
HP printers are well known for their efficiency and high-quality prints.
Printers may have many unexpected issues while using, Paper Jam problem is one of them.
Many facts trigger Paper Jam issue in HP Printers- Using bad quality printer paper.Paper not installed properly in a paper tray.Paper tray has been dislocated.Installed large amount of paper in the tray.Paper not positioned well in the line.Use of low-quality ink-cartridges/toner.Printer roller not working well.
To solve the paper jam problem in your HP printer, you can follow some recommended steps: Unplug the power cable from the rear of a printer as well as wall, while the printer is ON.Now remove all the paper from the tray or eject the whole paper tray.Now check for a paper jam in your printer and take it out slowly, if found any.By using a flashlight, look for any remaining paper particle.Next install the paper tray and reload it with a supported amount of paper.You need to be sure the paper tray is properly inserted and paper is in line.Plug the power cable in the wall first, then the rear of the printer.Wait till HP printer turns ON, else manually press the power button.
By doing the above task probably results unjamming the paper in printer and making it work again hassle-free.
A large amount of dust on the print roller will possibly result in Paper Jam.
