Sachiya Steel International is one of the prominent whole seller and trader of Stainless Steel 347H Angle, which is being available in different sizes and shapes to our clients. The addition of a small percentage of the alloying elements in Stainless Steel 347H Angle under consideration makes it possible to retard the transformation more effectively and hence to produce better physical properties.
Stainless Steel 347H C-Channel of these types show only slightly better non – corrosive properties than straight carbon – steels, and the reason for their wide use is the high physical – properties which will be brought about by heat – treatment. A detailed discussion of a so-called high-carbon type of Stainless Steel 347H H-Beam containing about 1.5 percent of chromium, 4.0 percent of nickel and 0.30 percent of carbon is given.
Stainless Steel 347H Angle | Stainless Steel 347H Angle | Stainless Steel 347H Angle | Stainless Steel 347H Angle | Stainless Steel 347H Angle | Stainless Steel 347H Angle
By increasing the content of nickel, the transformation range in Stainless Steel 347H I-Beam is finally lowered to a point below normal atmospheric temperature. About 25 percent of nickel is required to produce the desired effect, and Stainless Steel 347H T-Beam are produced which are not used exclusively because of their physical properties, but on account of their non – corrosive, non – scaling and heat – resisting qualities. Similar properties of these Stainless Steel 347H Chain are found in silicon – chromium steels, in chromium steels of high nickel – content, in chromium – tungsten steels, and in the high – chromium steels.
SS 347H Angle, Channel, Beam, Chain Specifications |
||
Specifications | : | ASTM A 276/A 276M,A 484/A 484M,A 564/A 564M,A 582/A582M,A 638 /A 638M,A705/A705M |
Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
SS 347H Angle |
: | 5mm to 9mm |
SS 347H Channel |
: | 40mm*20mm~300mm*300mm |
SS 347H Beam | : | 3″ thru 12.31″ |
SS 347H Chain |
: | 1/8 inch – 1/2 inch Diameter |
Thickness |
: | 3.0mm – 120mm |
Length | : | 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes |
Type | : | Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain |
347H Stainless Steel Angle, Channel, Beam, Chain Chemical Composition
Grade | C | Mn | Si | P | S | Cr | Cb | Ni | Fe |
SS 347H | 0.04-0.10 | 2 max | 1 max | 0.045 max | 0.030 max | 17-19 | 8xC – 1.10 | 9.0-13.0 | 62.74 min |
Stainless Steel 347H Angle, Channel, Beam, Chain Mechanical Properties
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
8.0 g/cm3 | 1454 °C (2650 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |