Sachiya Steel International is one of the well-established Manufacture & Exporter of high quality Stainless Steel 310H Threaded Forged Fittings, which is silver – coloured metal that conducts heat and electricity well. Stainless Steel 310H Forged Threaded Elbow is too reactive to exist alone so it only occurs naturally in the earth’s crust as iron ores, such as hematite, magnetite, and siderite. Identifying characteristics of Stainless Steel 310H Forged Threaded Tee is that it is strongly magnetic.
Stainless Steel 310H Forged Threaded Cross is exposed to a strong magnetic field, where any piece of steel can be magnetized. Stainless Steel 310H Forged Threaded Cap is most troublesome characteristic is its tendency to form rust. Rust (or ferric oxide) is a brown, crumbly compound that is produced when Stainless Steel 310H Forged Threaded is exposed to oxygen. The rate of rust – how quickly Stainless Steel 310H Forged Threaded Coupling turns into ferric oxide – is determined by the oxygen content of the water and the surface area of the steel.
Stainless Steel 310H Threaded Forged Fittings | Stainless Steel 310H Threaded Forged Fittings | Stainless Steel 310H Threaded Forged Fittings | Stainless Steel 310H Threaded Forged Fittings | Stainless Steel 310H Threaded Forged Fittings | Stainless Steel 310H Threaded Forged Fittings | Stainless Steel 310H Threaded Forged Fittings | Stainless Steel 310H Threaded Forged Fittings
Rust can be prevented by coating Stainless Steel 310H Forged Threaded Union with other metals that are chemically more attractive to oxygen, such as zinc (the process of coating iron with zinc is referred to as ‘galvanizing’). However, the most effective method of protecting against rust is the use of the Stainless Steel 310H Forged Threaded Bushing.
Stainless Steel 310H Forged Threaded Fittings Specifications |
||
| Specifications | : | ASTM A182 & ASME SA182 |
| Size | : | 1/8” NB to 4” NB (Socketweld & Screwed-Threaded) |
| Standards |
: | ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
| Class | : | 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS |
| Type | : | Threaded Fittings |
SS 310H Forged Fittings Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | Fe |
| SS 310H | 0.10 max | 2 max | 1.00 max | 0.045 max | 0.030 max | 24 – 26 | – | 19 – 21 | 53.885 min |
Stainless Steel 310H Threaded Fitting Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 7.9 g/cm3 | 1402 °C (2555 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 40 % |
Equivalent Grades for 310H Stainless Steel Forged Fittings
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 310H | – | S31009 | – | – | – | – | – |
Stainless Steel 310H Forged Fittings Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
For more details:
Web: https://steeltube.co.in/
Phone: +91 9769056007
E-Mail: [email protected]
Sachiya Steel International is one of the well-known Manufacture And Exporter of Stainless Steel 410 Forged Threaded Fittings, which display good resistance to scaling in continuous service up to 650 Degree C. Small sections of Stainless Steel 410 Forged Threaded Elbow can be air cooled and larger sections oil quenched for maximum through hardness.
Pre hardened and tempered Stainless Steel 410 Forged Threaded Tee will also respond readily to nitriding achieving a typical surface hardness.The nitriding process of Stainless Steel 410 Forged Threaded Cross however reduces the corrosion resistance and is therefore not generally recommended except for critical applications where the benefit outweighs all other considerations.
Stainless Steel 410 Forged Threaded Cap is used for parts requiring a combination of good strength and toughness, plus reasonable corrosion resistance.Stainless Steel 410 Forged Threaded Fittings | Stainless Steel 410 Forged Threaded Fittings | Stainless Steel 410 Forged Threaded Fittings | Stainless Steel 410 Forged Threaded Fittings | Stainless Steel 410 Forged Threaded Fittings | Stainless Steel 410 Forged Threaded Fittings |Use of Stainless Steel 410 Forged Threaded Fittings at higher working temperatures results in a substantial drop in tensile strength and hardness with subsequent increase in ductility.
Stainless Steel 410 Forged Threaded Coupling is not recommended for use at sub – zero temperatures due to a substantial drop in impact properties consistent with most steels other than the austenitic steel types.
In the hardened and tempered as supplied condition, Stainless Steel 410 Forged Threaded Union will be more difficult due to the high yield strength which must be taken into account.
Stainless Steel 410 Forged Threaded Fittings SpecificationsSpecifications:ASTM A182 & ASME SA182Size:1/8” NB to 4” NB (Socket weld & Screwed-Threaded)Standards:ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799Class:2000 LBS, 3000 LBS, 6000 LBS, 9000 LBSType:Threaded Fittings SS 410 Forged Fittings Chemical CompositionGradeCMnSiPSCrMoNiNSS 4100.15 max1.00 max1.00 max0.040 max0.030 max11.50 – 13.50–0.75 max–Stainless Steel 410 Threaded Fitting Mechanical PropertiesDensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation7.8 g/cm31400 °C (2550 °F)Psi – 65000 , MPa – 450Psi – 30000 , MPa – 20520%Equivalent Grades for 410 Stainless Steel Forged FittingsSTANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENSS 4101.4006S41000SUS 410410S21––X12Cr13 Stainless Steel 410 Forged Fittings Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper Industry
Sachiya Steel International is one of the Leading Manufacture and Exporter of Stainless Steel 317L Threaded Forged Fittings, which show a much smaller rate of abrasion volume loss with increase in abrasion velocity than the austenitic steels.
Stainless Steel 317L Forged Threaded Elbow derive their outstanding properties from their capacity to resist unstable fracture of micro shear lips on the abraded surface.
This is due to the strain capacity in Stainless Steel 317L Forged Threaded Tee afforded by the mechanical inducement of the martensitic phase transformations and the high work – hardening characteristics of the transformation product.The influence of this transformation has been studied as a function of prior cold work and velocity of abrasion on a range of austenitic Stainless Steel 317L Forged Threaded Cross.
Notwithstanding these advantages of the austenitic grades, Stainless Steel 317L Forged Threaded Cap are superior in terms of cost per unit volume lost and the new ferritic – martensitic steel designated has potential as an abrasion resisting material in corrosive environments.Stainless Steel 317L Threaded Forged Fittings | Stainless Steel 317L Threaded Forged Fittings | Stainless Steel 317L Threaded Forged Fittings | Stainless Steel 317L Threaded Forged Fittings | Stainless Steel 317L Threaded Forged Fittings | Stainless Steel 317L Threaded Forged Fittings | Stainless Steel 317L Threaded Forged Fittings Complex design requirements can make Stainless Steel 317L Forged Threaded fittings necessary to combine different metallic materials within the same component.
Also, chance combinations can often be found in Stainless Steel 317L Forged Threaded Coupling, governed only by the availability of, for instance, fasteners or shims.
In certain circumstances, such mixed – material designs of Stainless Steel 317L Forged Threaded Union can lead to corrosion in one of the partner materials.
Sachiya Steel International is one of the Leading Manufacturer And Exporters of Stainless Steel 304L Threaded Forged Fittings, which can be easily welded and processed by standard shop fabrication practices.
The austenitic structure of Stainless Steel 304L Threaded Forged Elbow also gives this grade excellent toughness, even down to cryogenic temperatures.
Stainless Steel 304L Threaded Forged Tee does not perform well in more highly reducing environments such as those containing chlorides and sulphuric acid.Stainless Steel 304L Threaded Forged Cross Performs well in freshwater service with low levels of chlorides, whereas at higher chloride levels the grade is susceptible to crevice corrosion and pitting.
Working temperatures of 1652 Degree F – 2102 Degree F (750 Degree C – 1150 Degree C) in Stainless Steel 304L Threaded Forged Cap are recommended for most hot working processes.
The best machining results in Stainless Steel 304L Threaded Forged Fittings are achieved with slower speeds, heavier feeds, excellent lubrication, sharp tooling and powerful rigid equipment.Stainless Steel 304L Threaded Forged Fittings | Stainless Steel 304L Threaded Forged Fittings | Stainless Steel 304L Threaded Forged Fittings | Stainless Steel 304L Threaded Forged Fittings | Stainless Steel 304L Threaded Forged Fittings | Stainless Steel 304L Threaded Forged Fittings | Stainless Steel 304L Threaded Forged Fittings For maximum corrosion resistance, Stainless Steel 304L Threaded Forged Coupling should be annealed at 1900 Degree F (1038 Degree C) minimum and water quenched or rapidly cooled by other means after hot working.
Stainless Steel 304L Threaded Forged Union is not suitable for use with sulphide, nitric acid, acid chromates, or oxidizing salts such as ferric chloride.
Sachiya Steel International is one of the well-known Manufacture and exporter for high quality Stainless Steel 310 Threaded Forged Fittings, which are reduced to iron, also called hot metal or pig iron.
After casting and rolling, Stainless Steel 310 Forged Threaded Elbow is delivered as coil, plate, sections or bars.
Stainless Steel 310S Forged Threaded Tee made in fine quality uses electricity to melt recycled steel.
Additives, such as Stainless Steel 310 Forged Threaded Cross are used to adjust to the desired chemical composition.Electrical energy in Stainless Steel 310S Forged Threaded Cap can be supplemented with oxygen injected into the EAF.
Another steelmaking technology, the open hearth furnace (OHF), makes up about 0.4 % of Stainless Steel 310 Forged Threaded production.
The OHF process of Stainless Steel 310S Forged Threaded Coupling is very energy intensive and is in decline owing to its environmental and economic disadvantages.
Sachiya Steel International is one of the prominent Manufacture of high quality Stainless Steel 310H Wire Mesh, which Good resistance to mildly corrosive atmospheres, but significantly less than Grade 310H due to the Sulphur addition; the sulphide inclusions act as pit initiation sites.
Grade 310 should not be exposed to marine or other similar environments, as these will result in rapid pitting corrosion.
Because the sulphide inclusions in 310 are primarily aligned along the rolling direction the corrosion resistance is particularly reduced in cross-sections.It is like other common austenitic stainless steels, is subject to stress corrosion cracking in chloride containing environments above about 50°C.
Good oxidation resistance in intermittent service to 760°C and in continuous service to 870°C.
Welds must be annealed for maximum corrosion resistance, but even then poor mechanical and corrosion properties will result.For ultra-high machining rates there are also available special grade variants such as Ugima 303UX.
This includes copper to reduce the work hardening rate, in addition to the usual high Sulphur and Improved Machinability steel making practices.
