Orbi is a smart WiFi system that provides coverage, speed, and reliability throughout a home. Also, it is compatible with any internet service provider. It shows different LED lights that have different meanings. If you see the Orbi blinking white, this indicates that the device is booting up or resetting. However, it is supposed to be off once it boots up completely. But if Orbi blinking white, will keep blinking?
There are several causes of Orbi blinking white. If you are also struggling with the Orbi white light issue, then don’t worry, as you have reached the right place. In this guide, you will be provided with how to fix Orbi blinking white. Encountering the Orbi white LED light is very common, and many users have reported the same problem. If you don’t know how to troubleshoot this problem, then simply go through the following fixes to rectify the Orbi blinking white.
What Are the Causes of Orbi Blinking White Light?
When we know the root causes, it becomes simpler to identify and troubleshoot the problem. Therefore, it is necessary to become familiar with the root causes of the problem. Below are some common causes of Orbi blinking white.
1. Firmware Update Failure
If you are updating Orbi firmware and it encounters an error during a firmware update. Then it may get stuck in a boot loop, and as a result, you will face the Orbi blinking white.
2. Different Firmware Versions
If the Orbi router and Orbi satellite have a different version of the firmware, then you face the Orbi blinking white continually. So, you need to check that both devices are on the same network.
3. Temporary glitch
You will encounter the Orbi blinking white issue if your device is suffering from any temporary glitches. So, simply try to restart your Orbi device to fix the problem.
4. Power interruption
Orbi blinking white issue can be caused by sudden power outages or accidental disconnections during boot-up or firmware updates. So, you need to plug the device, where it receives a constant power supply.
Steps to Resolve the Orbi Blinking White
Hope now you are familiar with the root causes of the problem, it is time to fix it as soon as possible. If you don’t know how to fix Orbi blinking white, then go through the below-provided resolutions to rectify the problem.
1. Power Cycle the Orbi Device
The foremost step to rectify the Orbi blinking white light issue is to power cycle the device. This will fix any temporary glitches on your device. Below are the steps to power cycle the Orbi device.
- Unplug the power cord from the Orbi router and also unplug any connected satellite.
- Then wait for a minute and let the device discharge fully.
- Now reconnect the power cord to your router and wait for it to boot up completely.
- Once the router is online again, plug in the power cord of the satellite.
- Next, let each device fully boot up before connecting the next.
2. Resync the Orbi Satellite
The next step to solve the Orbi blinking white issues is to re-sync the Orbi satellite. Here is how to resync the Orbi satellite to the Orbi router.
- Firstly, make sure that your Orbi satellite and router are receiving adequate power supply and are turned on.
- Now press the Sync button on the Orbi router and wait for a couple of minutes.
- After this, press the Sync button again and see if the syncing is successful based on blinking light.
- If it blinks blue, then the sync is successful. But if you see the Amber LED light, then this means you need to move the device closer.
- If the LED light blinks magenta for more than a couple of minutes, then it means sync has failed.
3. Update the Orbi Firmware
The Orbi blinking white light issue can also caused by corrupt or damaged Firmware. So, to fix the problem, you need to update the Orbi firmware. To update the firmware on your Orbi, follow the steps below.
- Connect your host network to the WAN port on your Orbi router with an Ethernet cable.
- Now open the browser on your device and go to the web portal of the Orbi router.
- Then log in to your account, usually, it is 192.168.1.1.
- After this, go through the on-screen instructions to set up the devices according to your requirements.
- Next, cancel the failed firmware update in the Firmware Update tab.
- Get the latest firmware from Netgear's website and extract it on your computer.
- While downloading firmware, you need to make sure that the downloaded firmware matches the router/satellite.
- After that, open the Web UI of the Orbi, go to the Advanced section, and click on Administration.
- Select Firmware Update and click Manual Update. Once the firmware update has been extracted, click Browse, and select it.
- At last, wait till the upgrade is complete and see if the Orbi blinking white issue gets fixed.
Sum up
Resolving the Orbi blinking white is not as tough as you think, it is a quite simple and easy task. Hope the above easy-to-follow instructions will help you with how to fix Orbi blinking white. In this, you will also get familiar with the root causes of Orbi blinking white.
