SUPPORT FOR COMPUTER RUNNING SLOW

How to turn on Bluetooth on Windows 10:- Bluetooth is the most used tool of any laptop computer or smartphone.

This post will walk you through the process of activating Bluetooth, adding devices and how to use it in windows 10.

https://www.androidgigs.com/how-to-turn-on-bluetooth-on-windows-10/

Macs no longer have internal DVD and CD-RW drives, but for Mac users who still need to use optical discs the Apple SuperDrive offers an external all-in-one USB solution that can read and write both CD and DVD discs, all you have to do is plug it into a USB port on the Mac and Mac OS will detect the SuperDrive.

Windows Defender is the in-built antivirus and is fairly competent at its job.

However, there are times when the tool might flash an error on your screen.

Error 0x800704ec is one such error, and if you are encountering it too, then we will help you out.

So, here are the instructions to solve the error.Turn off the Windows Defender ServicesIn case you intend to turn off the Windows Defender services, then you can opt to follow the below-mentioned guidelines.Hold the Win + R keys at the same time on your system to launch the Run section.After that, input ‘service.msc’ into it and hit the Enter key.You should browse for the services for Windows Defender in the list of Services to look whether they are working.Go to the services that have an empty space into the column of Status.You have to the right click on them and choose the Start option.Now, restart the system.Turn off and Uninstall Third-Party Antivirus ProgramThis is not unusual for third-party antivirus utility to interrupt with Windows Defender, more often than not even stopping it from opening.

So, simply launch the list of installed programs section under Control panel and uninstall them.Change the Group PolicyIf the users are trying to change the group policy, then they should carefully apply the given steps.Hold the Win + R keys at the same time on your system to launch the Run section.Thereafter, input the ‘gpedit.msc’ and hit the Enter key to launch the Group Policy Editor.Go to the folder of ‘Administrative Templates’ and twice click on it, beneath the Computer Configuration.You should click on the Windows Components option.Navigate to the ‘Windows Defender Antivirus’ and locate the ‘Turn off Windows Defender Antivirus’ on the right-hand side of the screen.Reach the ‘Turn off Windows Defender Antivirus’ and twice click on it.Now, click on the ‘Not Configured’ option and select the Apply and OK buttons.Change Certain RegistriesIn case you intend to change certain registries, then you can opt to follow the below-mentioned guidelines.Press the Win + R keys at the same time on your system to launch the Run section.After that, insert the ‘Regedit’ and hit the Enter key to launch the Registry Editor.Navigate to the pursuing address and remove the ‘msseces.exe’ entry from both of them: ‘Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows Defender.’You should locate the ‘REG-SZ’ on the right-hand side of the screen and twice click on it to adjust the value to 0.Now, restart the system.ConclusionThe blog represents the resolution of the Error 0x800704ec.

It is suggested to be aware while reading the article because the process is a bit intricate and lengthy.

There are many companies which design mind-blowing printers wherein Epson is the most exclusive choice.

You can do many things with the help of the Epson printers such as print, copy, fax, and scan at a time.

In case you have any doubts about how to perform the Epson xp 440 Setup Wireless, then directly reach out to the best technicians.

Here are the simple steps that you must follow to fix the printer problems: Check the Epson Printer Spooler Service: Spooler service basically handles the print function & the communication between the printer & PC.

Double click on it.• double click on the print spooler• Check if your startup type option is set to ‘Automatic’ and Service status is running.• If it is not set to automatic, tap on the option and choose ‘Automatic’ from the drop-down menu.• Tap on the ‘Start’ button.• Press on the ‘OK’ button.• You can take a test print in order to check if your printer is printing fine.

You must regularly update the Outdated Epson Printer driver If your printer drivers will get outdated, follow the steps given below to install the latest printer drivers: • Navigate to the Control panel and then choose the Device Manager.• You must find your listed printer and then right-click on the printer name.• Choose the ‘Update Driver Option’.• Tap on the Epson printer update driver.• This will automatically start searching for the latest updated printer driver.• Follow all the instructions properly to install an updated driver.

How to fix QuickBooks Error Code 80040408 & know about how it Related Blog. How to Resolve QuickBooks Error Code 80029c4a. Causes and resolutions for this error, which comes directly from the Intuit Begin Session Error Code: 80040408 Could not start Quickbooks. QuickBooks software is known for providing a handy method for completing accounting tasks with the efficiency of topstitched quality. QuickBooks Error Code 80029c4a.

If yes, then you probably want to reinstall it on your device.

If yes, then we are here to help.

Hit the Start key on your keyboard.

Choose McAfee and click on Uninstall and see the on-screen instructions to complete the process.

If you got an unused McAfee license, then you can easily use this license to activate your McAfee antivirus in any device.

Enter your McAfee Email address and password.

Wireless Printers are easy to function as well as very handy to access.

They have eased down to ensure better printing and easy functionality without indulging with tangled wires.

But sometimes while trying to connect it to WiFi, you may face issues like never before.

Your printer may even visibly show offline even after being online.However, connecting your printer to a wireless network can be a very feasible task with the following steps.Connect Your Windows Computer To A Wireless Network.

If your computer prompts you to enter a WPS PIN, select cancel.For printers with a wireless button, press and hold it for 3 seconds until the light on it blinksIn case your printer has a control panel with menus, navigate to the network settings or wireless settings menu.Click on WiFi protected setup, touch the push button and then press start.On the router, press and hold the WPS button until it starts blinking.

Then you have to select the printer without a touch screen control panel and then click continue.

In Windows 7, Microsoft did a good job making the system to perform well.

However Windows 7 can slow down and need some care too to make it run like new again.

Don’t worry I will reveal the top 5 way to speed up your windows 7 to run faster again.

It fast and easy way to do this, just follow it step by step down below.

Way to Speed Up Windows 7

There are a lot of programs that can slow down your computer, those require most of your CPU usage and hard disk space.

There is no doubt that Windows 10 updates are useful and enhance stability, security and user experience, yet, there are times when they can cause harm.

Here are some of the easiest ways you can fix issues caused Windows updates –

To Uninstall Windows 10 Update using the method mention below, the concept of patches and builds comes into play.

There are majorly two Windows 10 updates – builds and patches.

This method shows updates that have been installed in the last build.

If you wish to uninstall an update right-click on update and choose Uninstall

How to Analyze Disk Space in Windows 10/8/8.1/7

If your hard drive is starting to fill up unknowingly where you start to wonder what exactly had happen to your disk that is taking up all the space.

That’s when come in the need to analyze disk space where you require to find how much space is filled and how much space is actually empty to work with.

There are many query asked by user like: how to analyze disk space in windows 10?

If you are facing such issue, then read the complete blog to get the solution on analyzing hard disk space for your system.

Analyze Hard disk space by CMD command

If your Windows Defender causes up an error notification saying “item skip during the scan,” then the issue occurred due to an item being missed during the scan.

If you have disabled network scanning on your device, then you can also face this issue.

The application settings does not have the ability to control the scanning of your network settings.

To fix this, you might be needed to enable networking scanning on Windows Defender.How to Enable Network Scanning in Windows DefenderIn this article we will show you how you can enable network scanning in windows defender with three ways and each method will permit network scanning:PowerShellGroup PolicyRegistry EditorAll these methods are depending on which windows version you are using, and you can select one from the above methods.1) PowerShellStart PowerShell along with the admin account.Enter and confirm the command:Set-MpPreference –DisableScanningNetworkFiles 0There is no other output for this command, so you need to copy a file from your network and check you fix this error.If you wish to disable it, then you need to set it 1.2) Group PolicyHere are the steps on how to enable Network scanning in Windows Defender through Group Policy:Launch the group policy editor and the visit to Computer configuration.Tap Administrative temples.Hit Windows components.Tap Windows Defender Antivirus.Tap Scan.Double-tap “Scan network files” and then set it to “Enabled.”Tap Ok.When you have enabled this service, all network files will be scan automatically.Remember that the default setting cannot scan any network files.3) Registry EditorWhen you are using Windows Home, you can also try to check registry value in the group policy that is not available for you.Here you need to launch registry editor and move to:Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows DefenderRight-tap on “Windows Defender” and generate a folder key with the name “Scan” in the scan option.

Here you have to create a new DWORD with “DisableScanningNetworkFiles” and then set it to “0” to enable the scanning.Turn off the Registry.Next, you need to copy the file network; it will automatically scan.You can also copy the shortcut key and import it into another PC to apply rapidly.John Smith is a creative person who has been writing blogs and articles about cybersecurity.

He writes about the latest updates regarding mcafee.com/activate and how it can improve the work experience of users.

The Microsoft Defender Antivirus scans your computer system regularly to make it free from malware and viruses.

And for the better functioning of all your devices, it is essential to scan them from time to time.

Anyone can easily schedule a scan on their Windows 10 computer.

In the following article, we have mentioned the technique that will help you to schedule a scan in Microsoft Defender Antivirus on your Windows 10 desktop.

So, to get to the method, please go through the complete article.The Method to Schedule a Scan in Microsoft Defender Antivirus on Windows 10To schedule a Microsoft Defender Antivirus scan on your Windows 10 PC, you will need to follow the procedure that we have mentioned in this article.

This task is easy to accomplish and includes some simple steps that you should follow.

Internet Explorer is one of the most popular browsers that is also packed with a lot of capabilities, but still, only a few people use it. Microsoft uses it as a default web browser for Windows. In the newer version of Windows, Microsoft has added a new web browser “Microsoft Edge” as default one. Most of the users are not comfortable with Internet Explorer, and they prefer to use other third-party browsers such as Google Chrome, Opera, Mozilla Firefox, and more. If you also prefer other browsers and no longer need Internet Explorer, then you can remove it from your computer. It will only take a little time to uninstall Internet Explorer, and will also free up some storage space.

SOURCE: How to Uninstall or Remove Internet Explorer Completely from PC , AOI Tech Solutions

You have multiple ways to remove Internet Explorer browser from your computer; you can use Settings app, Control Panel, as well as PowerShell to uninstall it. Before going ahead, you must know that only Windows 10 can remove IE like other programs, and none others can’t do so. However, all other Windows versions such as Windows 8 and Windows 7 can disable it from settings.

How to uninstall or remove Internet Explorer from the Settings app

You need to open the Settings window in your Windows 10 PC.

1.    Open Start. Press ‘Win’ key on your computer’s or laptop’s keyboard to open start.

2.    When it opens, look for a small gear icon at the very left side of the screen. It is just above the power icon, click it.

3.    Now, click on ‘Apps’ options in Windows Settings.

4.    Click on ‘Apps & Features’ in the left column under Apps heading.

5.    Click on ‘Manage optional features.’ It is just below the Apps & features heading at the top. Clicking it will display a list of all the programs installed in your system, including Internet Explorer.

6.    Find the Internet Explorer browser in the programs list. You may need to go down in the list to look for it.

7.        Click ‘Internet Explorer’ on the list. You’ll see an option (Uninstall button) to remove it.

8.    Click on ‘Uninstall’ button of the Internet Explorer to initiate the uninstallation process. You may also observe a progress bar on display.

9.    Wait for a few seconds to fill it up completely. Once it completes, you’ll see that Internet Explorer will disappear from the programs list.

You can check this in the complete list by scrolling up and down. After that, close Windows settings and restart your computer. Once your computer restarts, Internet Explorer will be removed completely.

How to uninstall or remove Internet Explorer from Control Panel

If the above method is not helpful for you, access the control panel in your PC to remove Internet Explorer.

1.    Open Start.` Press ‘Win’ key on your computer’s or laptop’s keyboard to open start.

2.    Start typing ‘control panel.’ In Windows 8, you have to click on the ‘Search’ icon first.

3.    As you type, Control Panel will appear on the top in the menu.

4.    Click on ‘Control Panel’ at the top in the start menu.

5.    Under the control panel window, click on ‘Program’ or ‘Programs and Features.’

6.    Then click on ‘Turn Windows features on or off.’ You’ll find this option below Programs and Features heading. If it isn’t there, then look at the top left side of the screen.

7.    Now, find the Internet Explorer in the box.

8.    Then click the box next to the ‘Internet Explorer’ in the list.

9.    Now, you’ll be asked to confirm that you want to turn off Internet Explorer, click ‘Yes’ on the pop up to confirm.

10.    Then click on the ‘OK’ button at the bottom. This will begin disabling Internet Explorer in your computer.

11.    When it finishes, ‘Restart now’ button will start appearing at the bottom left corner of the screen.

12.    Click ‘Restart now’ to end process.

Once your computer restarts, Internet Explorer will be removed completely.

Harry Williams is an inventive person who has been doing intensive research in particular topics and writing blogs and articles for  AOI Tech Solutions  on Norton, Webroot, McAfee, Microsoft Office and many other related topics. He is a very knowledgeable person with lots of experience. To get in touch with the internet security service provider, just dial 8888754666.