Sachiya Steel International is one of the known Manufacture and Exporter for Stainless Steel 329 Angle, which offers good resistance to other inorganic acids such as hot phosphoric acid as well as most organic acids. The addition of copper to Stainless Steel 329 Angle gives it corrosion resistant properties superior to the conventional chrome nickel stainless steels, in particular to sulphuric, phosphoric and acetic acids. The austenitic structure also gives Stainless Steel 329 C-Channel excellent toughness, even down to cryogenic temperatures.
The high strength and corrosion resistance of our Stainless Steel 329 H-Beam make it a better choice than the conventional stainless steels and a cost effective alternative to more expensive nickel – base alloys where excellent formability, weldability, strength and corrosion resistance are essential. Because of its nitrogen content, Stainless Steel 329 I-Beam has greater tensile strength than common austenitic stainless, while retaining high ductility and impact strength.
Stainless Steel 329 Angle | Stainless Steel 329 Angle | Stainless Steel 329 Angle | Stainless Steel 329 Angle | Stainless Steel 329 Angle | Stainless Steel 329 Angle | Stainless Steel 329 Angle | Stainless Steel 329 Angle | Stainless Steel 329 Angle
The ASME allowable stresses for our Stainless Steel 329 T-Beam are up to 75 % higher than for 316L stainless, and more than twice those for the copper – nickel alloys. 329 Stainless Steel Angle is a widely used high – temperature bearing structural member of austenitic heat resistant alloy of high strength. Our 329 Stainless Steel Chain is mainly due to the addition of carbon, aluminum, titanium, and annealed at a minimum temperature of 1149 Degree C in order to achieve the grain size or more grades of crude.
SS 329 Angle, Channel, Beam, Chain Specifications |
||
| Specifications | : | ASTM A 276/A 276M,A 484/A 484M,A 564/A 564M,A 582/A582M,A 638 /A 638M,A705/A705M |
| Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| SS 329 Angle |
: | 5mm to 9mm |
| SS 329 Channel |
: | 40mm*20mm~300mm*300mm |
| SS 329 Beam | : | 3″ thru 12.31″ |
| SS 329 Chain |
: | 1/8 inch – 1/2 inch Diameter |
| Thickness |
: | 3.0mm – 120mm |
| Length | : | 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes |
| Type | : | Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain |
329 Stainless Steel Angle, Channel, Beam, Chain Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
| SS 329 | 0.08 max | 1 max | 0.75 max | 0.040 max | 0.030 max | 23 – 28 | 1.0-2.0 | 2.5-5.0 | – |
Stainless Steel 329 Angle, Channel, Beam, Chain Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 0.285 lb/in3 | – | MPA-725 | MPA-550 | 25 % |
Equivalent Grades for 329 Stainless Steel Angle, Channel, Beam, Chain
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 329 | 1.4460 | S32900 | SUS 329 | 329S31 | – | – | – |
SS 329 Angle, Channel, Beam, Chain Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Sachiya Steel International is one of the well-known Manufacture and Exporter of Stainless Steel 410 Angle, which is also characterized by high ductility and impact strength.
Stainless Steel 410 Angle is an austenitic stainless steel offering an excellent resistance to inter – granular corrosion following exposure to temperatures in the chromium carbide precipitation range from 800 Degree to 1500 Degree F. Stainless Steel 410 C-Channel is well suited for applications related to chemical processing, heat exchangers, desalinization and more.
With its high levels of chromium, molybdenum, and nitrogen, Stainless Steel 410 H-Beam has excellent resistance to a wide range of chemicals.Stainless Steel 410 I-Beam is especially suited for high chloride environments such as brackish water, seawater, pulp mill bleach plants and other high chloride process gicstreams.
Stainless Steel 410 T-Beam provides a cost – efficient alternative to nickel – based alloys and titanium.
Stainless Steel 410 Chain is alloyed with columbium – tantalum (referred to as niobium) and therefore allows good mechanical properties at high temperatures.Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle410 Stainless Steel Angle is known for their good thermal & electrical conductivities, high density, high melting point, and greater stiffness than steel.
These characteristics make 410 Stainless Steel Chain the ideal alloy for use in high temperatures, above 1100 Degree C , which is higher than steels and nickel – based super alloys.
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Stainless Steel 329 Round Bar , which is an age hardening nickel base super – alloy with exceptional strength from room temperature through about 1600 Degree F. Limit currents and the size of the fusion zone, where rapid cooling in Stainless Steel 329 Square Bars from welding is necessary to minimize aging stresses.
After welding, the fabrication of Stainless Steel 329 Flat Bars should be solution treated, using rapid heating and cooling rates through the aging range.
GTAW using DC straight polarity in Stainless Steel 329 Threaded Bars requires good joint fit – up and cooling by means of copper backup bars or water – cooled fixtures.After welding, the assembly of Stainless Steel 329 Hollow Bars should be solution treated using rapid heating and cooling rates through the 1200 Degree F – 1600 Degree F range, followed by aging.
Stainless Steel 329 Hexagonal Bars can even be a substitute of Austenitic grade of marine surrounding, where we offer tailor made these with suitable wedge options.Stainless Steel 329 Round Bar | Stainless Steel 329 Round Bar | Stainless Steel 329 Round Bar | Stainless Steel 329 Round Bar | Stainless Steel 329 Round Bar | Stainless Steel 329 Round Bar | Stainless Steel 329 Round Bar | Stainless Steel 329 Round Bar | Stainless Steel 329 Round Bar | Stainless Steel 329 Round BarStainless Steel 329 Triangular Bars doesn’t losses it shape when exhibit to a temperature of liquid nitrogen which is also high appreciable and has a great commercial demand.
High strength condition: Solution treatment of Stainless Steel 329 Bars is up to 60 Degree F – 100 Degree F below the beta (typically 1460 Degree F – 1480 Degree F), not less than 30 minutes, and then water quench.SS 329 Round Bar SpecificationsSpecifications:ASTM A276, ASME SA276 / ASTM A479 ASME SA479Dimensions:EN, DIN, JIS, ASTM, BS, ASME, AISISS 329 Round Bars:Outside Diameter in the range of 4mm to 500mmSS 329 Bright Bars:Outside Diameter in the range of 4mm to 100mmSS 329 Hex Bars:18mm – 57mm (11/16″ to 2-3/4″)SS 329 Square Bars:18mm – 47mm (11/16″ to 1-3/4″)SS 329 Flat Bars:1/2” to 10” in thickness range of 2mm to 150mm,Finish:Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA FinishLength:1 to 6 Meters, Custom Cut LengthsForm:Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.329 Stainless Steel Round Bar Chemical CompositionGradeCMnSiPSCrMoNiNSS 3290.08 max1 max0.75 max0.40 max0.30 min23.0-28.01.0-2.02.5-5.0–Stainless Steel 329 Rods Mechanical PropertiesDensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation0.285 lb/in3 –MPA-725MPA-55025 %Equivalent Grades for 329 Stainless Steel Round BarSTANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENSS 3291.4460-S32900SUS 329329S31 – – –SS 329 Round Bar Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
We export our high-quality fasteners in Saudi Arabia, Oman, UAE, Dubai, Kuwait, Qatar, Mexico, USA, Malaysia, Iran and many other countries.Email: [email protected] For More Information Visit Our Website : Steel Pipe Factory
Sachiya Steel International is a prominent leader in manufacturing, exporting and supplying of Carbon Steel EN Series Angle And Other Carbon Steel Products, which is available in different and made-to-order sizes and shapes for our esteemed clients.
We carry an extensive assortment of En Series Carbon Steel Angle in a variety of specifications, where we also carry a full stock program of these Super Duplex piping materials.
Browse our vast selection of high temperature sheet stock of En Series Carbon Steel C-Channel or get in touch with professional for a personalized quote on next high temp order.Typical applications of En Series Carbon Steel Chain include many components for the chemical processing, marine, oil and gas, pollution control and food industries amongst others.
En Series Carbon Steel I-Beam exhibits a low coefficient of thermal expansion and higher heat conductivity than austenitic steels and is suitable for working temperatures up to 300 Degree C.Carbon Steel EN Series Angle | Carbon Steel EN Series Angle | Carbon Steel EN Series Angle | Carbon Steel EN Series Angle | Carbon Steel EN Series Angle | Carbon Steel EN Series Angle | Carbon Steel EN Series Angle | Carbon Steel EN Series Angle | Carbon Steel EN Series Angle | Carbon Steel EN Series AngleOur expertise in global logistics enables us to source En Series Carbon Steel H-Beam from anywhere in the world in a matter of days and provide fast shipping solutions to all our customers, whichever country they are in.
The structure of En Series Carbon Steel T-Beam provides excellent resistance to chloride stress corrosion cracking (SCC).
En Series CS Chain shows excellent oxidation resistance up to 1200 Degree C (2190 Degree F).
Sachiya Steel International is the top most Manufacture & Exporter in Stainless Steel 304 Screw , which has slightly improved corrosion resistance over stainless steel 321 screws in strongly oxidizing environments.
Stainless Steel 304 Hex Head Screws is also advantageous for high temperature service because of its good mechanical properties.
Stainless Steel 304 Socket Head Cap Screws offers higher creep and stress rupture properties than Stainless Steel 317 Screws, which might also be considered for exposures where sensitization and inter – granular corrosion are concerns.Stainless Steel 304 Socket Set Screws is a columbium (niobium) / tantalum stabilized austenitic chromium – nickel stainless steel which was developed to provide an 18 – 8 type alloy with improved inter – granular – corrosion resistance.
Stainless Steel 304 Anchor Screws has a slightly improved corrosion resistance over other alloys of stainless steel in strongly oxidizing environments as a result of the addition of columbium (niobium) and tantalum.Stainless Steel 304 Blind Rivet Screws is the higher carbon (0.04 – 0.10) version of the alloy, which does not perform well in chloride solutions, even in small concentrations, or in sulphuric acid.
Stainless Steel 304 Concrete Screws was developed for enhanced creep resistance and for higher strength at temperatures above 1000 Degree F (537 Degree C).
In most instances, the carbon content of Stainless Steel 304 Threaded Screws enables dual certification.
