Canon PIXMA printers have changed our lives for good. It allows you to print from your computer, smartphone (Android and iOS), and other smart devices. Just set up the printer and you are all set to have all the benefits it gives. The Canon PIXMA MG 3600 setup is not a difficult process. Just follow the guidelines carefully and your setup is complete. We will discuss the steps and a few troubleshooting issues below.
Important Note: In case your device is using the internet via connection to a wireless router and you connect the same device to the printer via a direct connection. Then the existing connection between your device and wireless router will be disabled. If this happens, then the device will automatically shift to a mobile data connection.
How to Connect via Wireless Setup using WPS:
- Ensure that your wifi router has a physical WPS push button.
- Make sure that your network uses the security protocol; WPA or WPA2.
- Though this is a default setting on all the networks, check with the router’s user guide.
- If there are any recent changes in your router or the internet service provider, consider a factory reset of your default settings to continue.
- Press and keep holding the [RESUME/CANCEL] button.
- Now, wait till the alarm light flashes 21 times.
- Ensure that your router is properly accessible.
- Next, turn on your printer.
- Then, press the WIFI button and keep holding it.
- Wait till the ON light starts flashing.
- Then, press the COLOR button.
- Ensure the Wifi light flashes quickly and the ON light is lit now.
- Within the next 2 minutes press the WPS button.
- The blue-colored Wifi light on the printer will keep on flashing while it is searching for the network to establish a connection.
- It will stop flashing once the connection is complete and remain lit.
- The connection to your wireless network is complete.
- You may verify this by printing the Network Configuration page.
- Now, go back to the application screen.
Troubleshooting the Connectivity issue:
- Go to the Start Menu from your keyboard or from the screen.
- Select the Settings option from your Start Menu.
- Then go to the Control panel.
- Proceed by selecting Devices.
- Now, choose the option ‘Printers and Scanners’.
- Delete the printer from the list of devices.
- Next, reset the network settings available on your computer.
- Navigate to the Network and Internet option from the settings.
- Go to Status and click on Reset Network.
- Press on the Reset Now buttons to proceed with resetting the network settings.
- Navigate to the Program and features option from the control panel.
- Next, uninstall the printer software.
- Reboot your device.
- Now, install the printer driver software by browsing Canon’s manual website to reinstall the printer driver and ensure that the connectivity is established successfully this time.
MG 3600 Setup is Complete!
Hope now you know how to set up your Canon PIXMA MG 3600. Follow the guidelines for setup carefully and properly. In case you come across some connectivity issues, we have also mentioned the troubleshooting steps. You can refer to those steps. If you face some other issues with your Canon PIXMA 3600 series printers, browse the Canon manual site to check for other troubleshooting steps. Well! Your Canon PIXMA MG 3600 setup is complete and you can enjoy printing.
HP is a worldwide popular company that manufactures a wide range of tech products including laptops, desktops, notebooks, and hard disks.
Like the other products, HP printers are also demanded for their superior performance, amazing features, and high-definitions prints.
A specialized program named HP printer assistant makes all printers to work even faster.
At any point of time, if you find that your printer is not working smoothly then there could an issue with the drivers installed.
Therefore, it is always recommended to install printer’s driver from the official website of HP.
However, if you still want to uninstall these drivers, then follow these instructions:
You’ll find this in the left menu.4.
Close the settings.Once you complete all the steps, the feature will get disabled and you’ll be able to change and set the default printer manually.How to change or set a default printer from Settings in Windows 101.
Under ‘Printers & Scanners’ heading on the right, name of the printers and scanners connected to your computer are shown.5.
In the Control Panel windows, click the ‘View by’ text near the upper right corner.3.
And select ‘Small icons’ to change the view.4.
You may find it in the first column, and it will open a new window with your installed printers and devices list.5.
Windows Photo Viewer enables you to print directly through the application.
But certain times, once you provide the print job, you may face the ‘Windows Photo Viewer, not printing’ problem.
So, if you are facing a similar issue, then here are the instructions provided below.SOURCE:-How to Fix Windows Photo Viewer Not Printing?Extracting the Zip File Before PrintingIf you attempt to print through a zip file without extracting the file, maybe you should not be capable of printing.Then select the zip file, and right-click on it then choose the Extract button.You should launch the extracted folder.Thereafter, invoke the image in Windows Photo Viewer.Now, attempt printing the image and look for any improvements.Set the Standard PrinterHold the Windows and R buttons altogether over the keyboard to invoke the Run section.After that, input ‘control’ into it and select the OK button to invoke the Control Panel.You should reach the Hardware and Sound option.Go to the ‘Devices and Printers’ option and click on it.Reach the installed printers list and right-click on the desired printer.You have to choose the option of ‘Set it as a default printer,’Now, shut the Control Panel screen.Finally, invoke the application of Photo Viewer and look whether you should print now.Perform Printer TroubleshooterYou should select the Start menu and click on the Settings.After that, choose the ‘Updates and Security’ option.Then move down and select the Printer option.You have to choose the button of ‘Run the Troubleshooter.’Thereafter, pursue the on-screen steps and save the suggested fixes.Now, shut the troubleshooter then look for any improvements.Add the Printer AgainYou have to reach the Start menu and choose the Settings option.Then choose the Devices option.Go to the ‘Printers and Scanners’ option.Thereafter, select the button of ‘Add a printer or scanner.’Don’t forget to connect the printer to the system.Later, choose the printer through the list once you detect and on-screen steps to finish the setup.Now, invoke the application of Windows Photo Viewer and look for any improvements.Set Windows Photo Viewer as StandardGo to the Start menu on your system.Then choose the Settings option.You should choose the tab of ‘Default apps.’Thereafter, move down to the Photo viewer.Navigate to the option of ‘Choose a default.’Later, move via the applications then choose the Windows Photo Viewer through the list.Now, shut the Settings screen and look for any improvements.Jack Arona is a creative person who has been writing blogs and articles about cybersecurity.
She writes about the latest updates regarding mcafee.com/activate and how it can improve the work experience of users.
Her articles have been published in many popular e-magazines, blogs, and websites.
Possible Reasons For Outlook Error Code 0x800c8101:The OST file corrupts or internet connection problem.Up-gradation of outlook and windows corruption outlook profile.Due to system-level accountability.Failure on Microsoft OfficeDangerous system errorClash of antivirus with all the software, or Windows Firewall settings.The Solution of Outlook Error Code 0x800c8101:Create a new outlook profile.Identify the current location of outlook data file.Configure the new outlook profile as a default.Create a New Outlook Profile:Open the system and go to the start menu.In the start menu, search box enters the control panel and click on it.https://www.winchatsupport.com/microsoft-outlook-error-0x800c8101/
Surface Pro 4 is amongst the elite business laptops, and it is perfect for artists and graphic designers.
Besides, it is also an ideal device for browsing the internet and connecting with the world.
However, some users are experiencing issues while pairing their Surface Pro with iPhone’s hotspot.When your Surface Pro laptop doesn’t connect to your iPhone’s hotspot, it could be very frustrating and disappointing as you won’t be able to utilize the internet using your iPhone.
All you have to do is carefully go through this article and follow every single tip that we are providing.So what are you waiting for?Let’s fix this problem.Surface Pro Can’t Connect to iPhone’s HotspotIf you are also having the same issue on your devices, then follow the given methods one by one to troubleshoot your problem.1.
Here is what you need to do:On your iPhone, navigate to the settings app.Fine and select the general option.Find and select the about option and then click on the Name option.Now enter a new name for your iPhone.
This is what you need to do:Make sure you are on the desktop on your surface laptop.On your surface laptop screen, please swipe right to the left side.Find and select the settings option.Navigate to Control Panel and navigate to Network and Sharing Centre.Fine and select the Change Adaptor Settings option.There will be an option saying, Wi-Fi adaptor.Navigate to Disable this network device.Now hold on for a second and then turn it on again.Navigate to Control Panel and then select the ‘hardware and sound’ option.Once you have done that, go to the ‘Devices and printers’ option.Once there, look for the option that says, ‘Wireless network’ and then select it too.Now try connecting to your iPhone Hotspot, and it should connect to your surface laptop now without any problem.Hopefully, this will fix your problem without any trouble at all.
